Design, supply, installation of Vertical Garden System (VGS) along with provision of water supply system and lighting arrangement at newly constructed GM office of Kaniha Area

Amount

A)GI FRAME: Mainframe will on square pipe poles each fitted with base plates. This primary structure will be further supported with angles with cross section panels. The GI panel frame will have GI stacks supported by strengthening angles B)PANEL &POTS: Panel (Size: 520mmX175mm, Panel Weight-318 gm) Bio wall pot(Weight-120gm)

DRIP IRRIGATION SYSTEM: 1) Supply & Installation of drip irrigation system with control ball valves 2) Drip irrigation system for each plant, connection from PVC pipes, 16 mm LLDPE lateral pipe, Connecters & 2-4 lph dripper nozzles (one nozzles per planter and each nozzle is openable). 3) Automatic watering system with timer based with ½ HP mono block pump. Overhead tank available, pressure may sufficient (1-2 kg) to run the drip irrigation system.

PLANTS: Supply and installation of outdoor and indoor plants with dwarf & spreading habit. Media:- in mix format is used as planting Tech. Mix-Soil and Manure etc. and placed in the PP pot. 1) Ficus Green 2) Pendilanthus Green 3) Eranthmum Green-Golden 4) Rhoeo Variegated 5) Kalanchoe 6) Alternanthera Red 7) White Syngonium 8) Ficus Safari 9) Secretia Purple 10) Rhoeo Green 11) Jade Plant 12) Opiphogon Green 13) Asparagus Sprengeri 14) Pandanus 15) Philidendron Red Congo 16) Money Plant Green 17) Dracena 18) Money Plant Gold 19) White Syngonium 20) Philidendron Berkin

MANURE: Cocopet, vermi compost, Peralight, Soil etc

Installation charge for Vertical Garden

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall, 20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall, 25 mm nominal dia Pipes

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single tee without door110x110x110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5°110 mm bend

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions around the vertical garden system , for all heights and all levels etc. including: Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium (c) composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing the item includes cost of all material & labour component, the cost of all mock ups at site, including cost of structural frame work for ACP cladding. For the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, withmodular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Bulb/Call bell point , light point, fan point/exhaust fan /outdoor light point

Supply and fixing of Ultra bright compact, different colour recess mounted 8 watt 6500 k LED spot light in polycarbonate housing with high brightness led chips. Make- Havells, model-innova 3Neo round type. Philips, Havells or equivalent make

Supply and fixing Smart LED strip RGB with music synchronise 12watt 3 meter roll make Havells

Smart LED strip light controller up to 10-meter Havells make

LED strip light Concealed (Aluminium channel with diffuser) 18 mm x 6 mm

4H 7-watt 3000 K aluminium die-cast with Bi-Directional beam integrated LED ensure long lasting and energy efficiency with IP 65 protected wall washer light Havells make.

Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC

CHANDRAKANT BEHERA

HR TRADERS

Brahmajanani Biotech Private Limited

JHARNA SAHU

M/S. MAA LAXMI AGENCY