SPL REPAIR TO BLDG NO P 23 (04 OR MD ACCN) AT 58 GTC AND PROVN OF SYNTHETIC (VINYL) SURFACE FLOORING IN MULTIPURPOSE HALL AT 58 GTC UNDER GE SHILLONG

Amount

B/R SCHUDLE Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floors or sunken floors and pavings n exc 15 cm thickness (below or above ground level or sunken floors) complete all as specified and as directed.

M&L for PCC (1:4:8), type D2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC (1:5:10), type E2 using 40 mm graded crushed stone aggregate as in sunken floor complete all as specified and directed.

M & L for mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for precast RCC 1:2:4 type B1 using 20 mm gradedcrushed stone aggregates as in cover slab for soakage well / manhole and similar works supported on walls and set in cement mortar 1:6 complete all as specified and directed..

M&L for precast cement concrete block masonary with solid blocks, exc 10cm in width or girth, made out of PCC (1:3:6) type C1 using 20mm graded crushed stone aggregate, and set in cement mortar (1:6) complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping, fixing hold fast and the like including weathering slightly rounding or chamferred angle and throating etc including necessary formwork complete as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foot path, finished even and smooth without using extra cement complete as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection layed in bays n exc 2m, finsihed even and smooth without using extra cement complete as specified and directed.

M&L for PCC (1:3:6), type C2 using 40mm graded crushed stone aggregate in surface channels and drains etc. finishing surface even and smooth without using extra cement and including necessary form work complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

Ditto all as per item No.16 here-in-above but in vertical surfaces such as skirting/dados, laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with white cement and pigment, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

M& L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and polishing and including 20 mm thick screed bed in CM 1:3 including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in any position, unframed work complete all as specified and as sirected.

Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L for second class hardwood fillets, bull nosed, splayed, chamfered or rounded on one edge or face secured with nails or brads sectional area exc 6 Sqcm and n exc 13 Sqcm complete all as specified and directed.

M&L for second class hardwood fillets, bull nosed, splayed, chamfered or rounded on one edge or face secured with nails or brads sectional area exc 3 Sqcm and n exc 6 Sqcm complete all as specified and directed.

S&F 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber / GI / Alumi nium framework with nails in ceiling complete all as specified and directed.

S&F 20 mm thick 2nd class hard wood boarding as in eaves board/fascia, planed one side with butt joints and fixed with nails complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) n exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) exc 1.5Sqm but n exc 4 sqm each complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L for 2nd class hardwood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed.

S&F 2nd class hardwood 35mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 100mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 200mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 250mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F 100mm extruded aluminium, anodised, handles complete all as specified and directed.

S&F 75mm Brass handles, cast type, polished bright complete all as specified and directed.

S&F 150 mm extruded brass handles, fabricated type complete all as specified and directed.

S&F 150 mm stainless steel handles, decorative type complete all as specified and directed.

S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 18/19mm thick block board, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work complete all as specified and directed.

S&F 12mm thick block board, grade 1 quality, exterior grade, commercial type, fixed with screws to timber framework complete all as specified and directed.

S&F 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, Width of flaps 30mm (when open) complete all as specified and directed.

S&F magnetic catches, brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F 4.80mm thick sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F MS flat iron hold fast and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for MS framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. including removal of rubbish from site of work complete all as specified and directed.

M&L for water proofing treatment to RCC roof slab/sunken floor including parapet comprising of the following course of treatment/specifications from bottom to top complete all as specified and directed. (i) Taking out old roof treatment and roughening the concrete slab by picking, sweeping clean and washing down with water to remove dust etc.and applying cement slurry @3kg/Sqm. (ii) Screed bed or bedding layer 15 mm thick in CM 1:4 in roof slab duly mixed with approved water proofing compound @ 3% by the weight of cement or as per manufacturer's instructions, finished even and smooth without using extra cement. (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986. (iv) Applying APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) over bituminous primer as specified above. Application of polymeric membrance shall by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (v) Applying one coat of aluminum paint over the APP modified membrance @ 0.11Kg/sqm.

M&L 15 mm thick rendering in CM 1:4 in two layers, first 10 mm thick base layer & finishing 5 mm thick with approved water proofing compound @ 3% by the weight of cement or as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separately here-in-after.

Supply on integral water proofing compound.

M&L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and as directed.

M&L 5mm thick rendering in CM 1: on ceiling surface, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered external surface of wall and applying two coats of weather proof paint (Exterior grade) over a coat of alkali resistant primercomplete all as specified and directed.

M & L for preparation of new plastered concrete surfaces of wall and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of priming paint complete all as specified and directed.

M & L for preparation of new plastered concrete surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment from external surface of wall and applying two coats of weather proof paint (Exterior grade) over a coat of alkali resistant primer complete all as specified and directed

M&L for complete removal existing treatment and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of priming paint complete all as specified and as directed.

M & L for preparation of old decorated surfaces (plastered or unplastered) of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparation of new wooden of any description, n exc 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

M&L for cutting chases in concrete block walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F 15mm bore GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only 15mm bore GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. (NOTE: Serviceable GI tubing obtained from dismantling under Sl Item No. 72 here-in-above shall be reused)

S&F 20mm bore GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only 20mm bore GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. (NOTE: Serviceable GI tubing obtained from dismantling under Sl Item No. 73 here-in-above shall be reused)

S&F 25mm bore GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S & F in repairs vitreous china wash hand basin, white, flat back of size 450 mm x 300 mm including bracket and cutting for and pinning the ends of brackets or erecting stands and including 32 mm dia brass chromium plated waste coupling, PVC connection 15mm size 450 mm length with PTMT nuts complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) with P or S trap, white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and provision of 32mm PVC flush pipe of required length and making connections complete all as specified and directed.

S&F in repairs sinks made of stainless steel, 1mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F Stainless steel kitchen plate rack of size 31'' X 30 '' X 10'' made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable one etc complete all as specified and directed.

S&F in repairs 600 mm long PVC flexible Waste pipe, 32mm bore for WHB/Sink complete all as specified and as directed.

S&F 125mm size chromium plated shower roses with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs soap dish holder complete all as specified and directed.

S&F in repairs corner glass shelf with bracket complete all as specified and directed.

S&F in repairs 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm dia Bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm dia Bib taps, 2 in 1, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm dia stop valves, fancy type, chromium plated, cast copper alloy with long shank and cup (concealed type) , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm bore CP single lever wall mixer with provision of over hear shower with 115 mm long bend pipe, connecting legs & wall flange complete all as specified and directed.

S&F in repairs 15mm bore CP lever sink Mixer with swinging spout on upper side (wall mounted model) with connected legs & wall flanges complete all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chroumium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F tubular towel rail, brass chromium plated, 20mm dia, D type, 600mm long between flanges complete all as specified and directed.

S&F 25mm dia harrison rails (curtain rails), anodised aluminium alloy with fixing brackets, stops, rollers etc. complete all as specified and directed.

S&F 500 Ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including dismantling old unserviceable tank all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, any radius with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends, any radius with access door complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for salt glazed stone ware drain pipes 150 mm bore, grade ‘A’, laid in trenches and jointed in cement mortar (1:1) including cement concrete (1:4:8) type D-2 (using 40 mm grade stone aggrete) as in concrete bed to drain pipes, packing under & haunching against the sides of pipes after they are laid & tested and including demolition and breaking up old drain pipes (salt glazed stone ware, AC or reinforced concrete) pipe set in cement mortar and removing from site of work complete all as specified and as directed.

M&L for prefabricated multilayer vinyl sports flooring 4.5mm thick and thickness of wear layer minimum 0.8mm, complete all as specified and directed. (Make: Enlio or equivalent as approved by GE)

M&L for Court line marking (Basket Ball/Volley Ball/Badminton Court) using approved acrylic line marking paint as approved by GE complete all as specified and directed.

E/M SCHUDLE Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified and directed..

M&L for point wiring for one light/fan/exhaust fan point controlled by one, one way switch using PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 1.5 sqmm nominal cross sectional area, 1100V grade, drawn in and including 20mm dia non metallic PVC conduit, concealed in wall/ceiling with all necessary accessories, cutting chases for concealed conduit wiring and making good disturbed surface, PVC modular board of suitable size for housing/mounting switches/sockets etc. and including PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 1.5 sqmm nominal cross sectional area as earth wire and connecting to common earth dolly complete all as specified and directed.

Ditto all as per item No.117 above but for one 5 Amp socket on same board with other switches complete all as specified and directed.

Ditto all as per item No.117 above but for one bell point controlled by one Bell push complete all as specified and directed.

Ditto all as per item No.117 above but for one light point controlled by two 2-way switches complete all as specified and directed.

M&L for point wiring for one socket outlet, 5A on independent board using PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 2.5 sqmm nominal cross sectional area, 1100V grade, drawn in and including 20mm dia non metallic PVC conduit, concealed in wall/ceiling with all necessary accessories, cutting chases for concealed conduit wiring and making good disturbed surface, PVC modular board of suitable size for housing/mounting switches/sockets etc. and including PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 2.5 sqmm nominal cross sectional area as earth wire and connecting to common earth dolly complete all as specified and directed.

M&L for point wiring for one power point socket outlet, 3 pin 15A on independent board using PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 4 sqmm nominal cross sectional area, 1100V grade, drawn in and including 20mm dia non metallic PVC conduit, concealed in wall/ceiling with all necessary accessories, cutting chases for concealed conduit wiring and making good disturbed surface, PVC modular board of suitable size for housing/mounting switches/sockets etc. and including PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 4 sqmm nominal cross sectional area as earth wire and connecting to common earth dolly complete all as specified and directed.

S&F modular switch 1 way, 1 module, 6A, 230~250 volt , AC supply, ISI Marked complete all as specified and directed.

S&F modular bell push, 1 module, 6A, 230~250 volt , AC supply, ISI Marked complete all as specified and directed.

S&F modular socket, 6A, 2/3 pin combined, 2 module, 230~250 Volts, 50 Hz , AC supply, ISI Marked complete all as specified and directed.

S&F modular socket, 6A/16A, 2/3 pin combined, 2 module, 230~250 Volts, 50 Hz , AC supply, ISI Marked complete all as specified and directed.

S&F modular switch 1 way, 1 module, 16A, 230~250 volt , AC supply, ISI Marked complete all as specified and directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm, three terminals suitable for 230 Volts AC, 6 Amps complete all as specified and directed.

S&F call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed.

S & F 18W LED light fitting wall mounted batten 4 feet, extruded aluminium housing, environmental friendly , heat sink provided for efficient heat dissipation and integrated electronic friver for 18 watt, 6000K including necessary connection and fitting complete all as specified and as directed.

S&F lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified and directed.

S&F LED Lamp, 9 watt, B22, base colour, temp 6500K complete all as specified and directed

S&F wall mounted LED batten fittings with all accessories 1x 10 watt LED / Foot light 6000k, extruded polycarbonate , integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed including taking down old unserviceable light fittings complete all as specified and as directed.

S&F LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed..

S&F Exhaust fan, 250mm, 230 volts, plastic body including making all necessary electric connection including cutting hole of required size on wall, fixing on & including wooden frame and making good disturbed surface of wall complete all as specified and as directed.

S&F in repairs MCB Distribution board, single pole and neutral , 8 ways, 240V double door, sheet steel enclosure powder coated with 100 Amps rated busbar with neutral link, fixed on wall duly grouted or on wooden board with all necessary electrical connections complete all as specified and directed.

S&F in repairs MCB Distribution Board, TPN, 4 way, 415 volts, 50 Hz, vertical, sheet metal enclosure, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and directed.

S&F MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity, 'C' series complete all as specified and directed.

S&F MCB SP, 6 to 32 Amps, 'C' series, 10KA, 240V and to be housed in DBs including necessary connection complete all as specified and directed.

S&F MCB TPN, 63 Amps, 10 kA rupturing capacity, 415 Volts complete all as specified and directed.

Taking down existing energy meter to facilitate repairs to bldg and refixing the same after completion at the original location and making all necessary electrical connections complete all as specified and directed.

Taking down existing water heater of any capacity to facilitate repairs to bldg and refixing the same after completion at the original location and making all necessary water & electrical connections complete all as specified and directed.

M&L for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including 20mm dia non metallic PVC conduit concealed in wall/ceiling with all necessary accessories, cutting chases for concealed conduit wiring and making good disturbed surface including taking down unserviceable wiring complete all as specified and directed. (Note: two run of 4.0 sqmm cable , one run of earth wire of 4.0 sqmm and one run of PVC casing capping shall be measured as one length).

M&L for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.complete all as specified and as directed.

M/S Surendra Prasad and Associates

Ms Amrik Singh Bahra

M/s Gupta Construction