Supply, Installation, Testing and Commissioning for laying of 11KV Line from Khyungru to Akgyam via Labab and Kongto under the head Laying of HTLT line of SDP 2021-22 on full turnkey basis.

Amount

Laying of 11KV Line

9 Mtr. Long Pole( ST-410 SP33)

GI V cross-arm (75x40x6mm) with GI top Bracket (50x8 mm) including GI clamp (50x8)mm the standard as per enclosed drawing and specification as per Annexure "A")

GI Channel X-arm including clamps and braces (the detail specification of x-arms for DP structure attached as annexure to this NIT)

30 mm² ACSR weasel Conductor (Single conductor length)

PG Clamps for 50 mm² ACSR Conductor

33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm

33kV Polymeric composite Disc Insulator 36kV,min failing load 70kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Red Oxide

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standards 0.5cum /pole including muffing 0.2Mtr above the ground level plaster and curing of concrete as per drawing/Annexure "D"

Aluminium Jointing Sleeves

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

11KV Link Set 200Amp as per REC Standard including Channels and Clamps(Complete).

M/S MUNEER HASSAN AKHON

M/S LEH STAR LIGHT