REPAIRS/REPLACEMENT TO INTERNAL ELECTRIC- WIRING DBS ,MCBS FITTINGS, FIXTURES ETC IN OTM AND CERTAIN MARRIED ACCN OF MCTE

Amount

Taking down carefully point wiring of any type complete for light, fan ,bell,socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, conduit etc. including accessories including making good disturbed surface to match the existing surface complete all as directed.

Taking down submain wiring any type and any size and making good disturbed surface and matching with existing colour complete all as directed.

Taking down switch fuse/DB'S including MCCB/MCB'S any type and any capacity complete all as directed.

M&L for concealed point wiring with PVC insulated and unsheathed, single core FRLS cable of size 1.5 sqmm stranded copper conductor, 1100 Volt grade, drawn into and including PVC rigid conduit not less than 20mm dia, medium grade, ISI marked with and including 1.5 Sqmm unsheathed green colour stranded copper conductor FRLS cable for continuous earth wire and including sunken pressed steel concealed terminal boxes of suitable size made out of 1.2 mm thick sheet covered with 2.6 mm thick white hylam sheet cover of suitable size for mounting switches/sockets/fan regulators or Modular flush box for mounting modular switches/sockets/regulators etc including cutting chasing in wall and making good disturbed surface with existing colour complete all as specified & directed for the following.

(a) One light point controlled by two 2-way switches

(b) One light/fan point controlled by one switch

(c) One bell point controlled by one bell push.

(d) One socket outlet 2/3 pin 5 amp, multipurpose on same board with other switches.

(e) One switch/socket outlet point 2/3 pin 5 amp multipurpose on independent board.

All as per Item No 4 above, but with FRLS cable 2.5 sqmm stranded copper conductor for switch/socket outlet 5 Pin,15 Amps multipurpose controlled with 2.5 sqmm copper conductor FRLS cable as continuous earth wire of green colour on independent board.

M & L for Point wiring with PVC insulated, PVC unsheathed cable, single core, stranded, copper conductor cable 1.5 Sqmm size, 1100V grade, drawn into with and including PVC casing capping not less than 20mm wide, ISI marked, with 1.5 Sqmm unsheathed, stranded copper cable for continuous earth wire and including pressed steel concealed terminal boxes of reqd size made out of 1.2 mm thick sheet covered with 2.8 mm thick plastic laminated bakalite (hylam) ISI marked sheet suitable for switches/sockets/regulators complete all as specified & directed for the following :-

(a) One light/fan point /bell point controlled by one switch.

(b) One point for socket outlet 5 amp on independent board.

(c) One point for socket outlet 5 amp same board

(d) One 3 pin 15 Amp socket outlet point controlled by one switch using 2.5 sqmm copper conductor cable with continuous earth wire of 2.5 sqmm copper conductor on independent board.

M&L for point wiring in Existing conduits with PVC insulated and unsheathed, single core FRLS cable of size 1.5 sqmm stranded copper conductor, 1100 Volt grade, drawn into PVC rigid conduit with and including 1.5 Sqmm unsheathed green colour stranded copper conductor FRLS cable for continuous earth wire and including sunken pressed steel concealed terminal boxes of suitable size made out of 1.2 mm thick sheet covered with 2.6 mm thick white hylam sheet cover of suitable size for mounting switches/sockets/fan regulators or Modular flush box for mounting modular switches/sockets/regulators etc including cutting chasing in wall and making good disturbed surface with existing colour complete all as specified & directed for the following :-

(a) One light/fan point /bell point controlled by one switch.

(b) One point for socket outlet 5 amp on independent board.

(c) One point for socket outlet 5 amp same board.

(d) One 3 pin 15 Amp socket outlet point controlled by one switch using 2.5 sqmm copper conductor cable with continuous earth wire of 2.5 sqmm copper conductor on independent board.

S&F switch piano flush type, 6 amps, 230V AC,single pole, one way.

S&F socket out let multipurpose suitable for 2 pin and 3 pin 5/6 amp type.

S&F switch piano, flush type 15 amps,230V, AC Single pole, one way, complete all as directed.

S & F socket out let 2 in 1, multipurpose suitable for 2/3 pin 15 amp flush type.

S & F bell push,flush type 5 Amp, 220 V, single pole.

Supply & fixing ceiling rose, 3 phase /PVC /polycarbonate, isolated body for surface type, 65x50mm three terminal.

S&F angle type holder insulated body with back plate complete all as directed.

S & F in repair fan step regulator, electronic type and connection complete after dismantling/ removing unserviceable regulator.

Supply and fix in repairs Modular Switch flush type 10 Amps single pole, one way complete all as specified.

Supply and fix in repairs Modular Socket outlet, multi purpose, 5 Pin combined 6 Amps flush type complete all as specified.

Supply and fix in repairs Modular Bell push flush type, 10 Amps complete all as specified.

Supply and fix in repairs Modular Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socket complete all as specified.

Supply and fix in repairs Modular Switch 16 Amps single pole, one way complete all as specified.

Supply & fix in repairs modular fan regulator step type, 2 module type complete.

Supply and fixing in repairs white finished single mounting modular plates sutable for modular accessories of following sizes as per specified and directed by Engr-in-charge.

(a) Sutable for 1/2 modules

(b) Sutable for 3 modules

(c) Sutable for 4 modules

(d) Sutable for 6 modules

(e) Sutable for 8 horizontal modules

(f) Sutable for 12 horizontal modules

Supply and fix in repairs sheet metal boxes concealed in wall suitable for housing modular accessories of following sizes as per specified and directed by Engr-in-charge.

(a) Sutable for 1 or 2 modules 50mm.

(b) Sutable for 3 modules 50mm.

(c) Sutable for 4 modules 50mm.

(d) Sutable for 6 modules 50mm.

(e) Sutable for 8 modules 50mm.

(f) Sutable for 12 horizontal modules,50mm

Supply and fix LED bulb of 7 watt, Of base B-22, suitable for fixing in lamp holder.

S & F in repair TPN DB with provision for MCB TPN as incomer and SP MCBs as outgoing made of steel sheet phosphatised powder coated with bus bar, neutral link earth bar and DIN Rail having IP 42-IK 09 with metal door capacity 4ways 415 V, connection with aluminium/copper lugs including civil/plastering work for make up good the disturbed surface matching with existing surface complete all as directed.

S&F (in replacement) MCCB 4 pole, 415 volts, in the existing panel / location and connection with using aluminum lugs complete all as specified and directed for 125 Amps rating, 16 KA breaking capacity.

Supply and Fix in repairs flush mounting factory made Vertical FP DB, IP-42 Protection -IK 09 with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of sapce for 100-125 amps MCCB as incomer and SP/TP MCBs as out going 4 way complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs double door SPN DBs 8 ways of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete.

Supply and fix in repairs double door SPN DBs 4 ways of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete..

Supply and fix in repairs double door SPN DBs 12 ways of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete..

S & F in repairs MCB SPN 6 to 32 amps 10 KA, 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F in repairs MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed.

S & F in repair MCB triple pole & neutral 63 amp, 415 volts, 'C' series' 10 KA breaking capacity & connection complete .Make- Havells/Legrand/L&T.

Supply and fix in repair plug, socket, single pole with & including single pole MCB 20 Amps 240 volts, Incl cutting of wall of required size for fixing ac box in concealed and making good of disturbed surfaces with existing colour complete all as specified and directed by Engr-in-Charge.

Supply in replacement, Side Holder & New Rotor Holder suitable for FTL T5 & T8 fittng all as specified and directed by Engr-in-Charge. Make-Havells or equivalent in Crompton / Bajaj

Supply in replacement, electric bell, ding dong , AC, 220 V, single pole Make-Havells/Bajaj/CG.

Supply in replacement, electric buzzer, AC, 220 V, single pole Make-Havells/Bajaj/CG.

Supply in replacement, compact electronic ballast suitable for any type fluorescent tube/CFL light fitting of 1x36 watt complete. Make-Havells/Bajaj/CG.

Supply in replacement, compact electronic ballast slim type suitable for Existing 28 Watts fluorescent tube light fitting of 1x28 watt complete all as specified and directed by Engr-in-Charge. Make-Havells/Bajaj/CG.

S&F( in building peripheri) energy efficient, compact street lighting 25 Watt LED with deep drawn Alluminium housing complete with conncting wire and provision of GI bracket, clamp, nuts, bolts grounded in wall incl all fixing arrangement. Make - Havells Cat No. ENDURAPEARLSL25WLED757SASYTOPC or equivelent in Wipro/Crompton.

S & F in repair PVC insulated cable three core copper conductor of size 1.5 sqmm , covered with round insulation complete all as specified & directed

S & F in repair PVC insulated cable three core copper conductor of size 0.75 sqmm , covered with round insulation complete all as specified & directed

S & F in repair of LED PL 18 W Lamp 4 PIN type (LED pin type 18 w lamp) suitable for Existing 2'x2' ceiling light fittings of 2X36/ 3X36 wattage type complete as specified and directed by Engr-in-Charge. Make-(Havells: cat no. PHOTONULTRAPLL419TL18WLED865SPC) or equivalent in Wipro/Crompton.

Supply and fix in repairs LED batten suitable for single T8 LED tube upto 1x22 Watt, without LED tube rod,pre-wired for LED tube, complete with all accessories duly connection with three core flexible copper cable and duly fixed on two Nos PVC square boxes complete all as specified and directed. (Make: Havells cat part no.LHFXCEP1TNNW020 OR Equivalent in wipro/ phillips/ Cropmton)

Supply and fix in repairs retrofit LED tube light T-8 type, 1x20 Watt, 6000K with extruded Al heat sink for efficient heat dissipation complete all as specified and directed.( Make:- Havells, Cat No. LHLDEFXD5L8R020 or equivalent in Wipro/Phillips/Crompton.

Supply and fix in repairs LED tube light fittings 1x9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of pvc square boxes complete all as specified and directed.(Make: Havells cat part no. LHEXBLP7UN1W009 Or Equivalent in Crompton/wipro/phillips.

S&F for energy saving recess/surface mounted luminaire 36W, high efficiency PMMA diffuser gives soft glare free light, suitable for 600X600 ceiling cut out, recess mounted 36W LED luminaire in MS housing (2'X2') incl Provn of three core cable of copper conductor of size 1.5 sqmm, making necessary electric connetion from ceiling rose to fitting terminal , fixing the fitting on ceiling including cutting, grooving with proper finish and making good, disturbed surface with all fixing arrangement complete all as directed (Make-Havells/Crompton/Philips.

S&F for energy efficient , Ultra Modern design LED luminiaire 36 W (1x4) withCRCA housing white power finish,which provides soft-light glare free symmetrical illumination suitable for Armstrong/ Grid ceiling /surface application, incl provn of three core cable of copper conductor of size 1.0 sqmm, making necessary electric connection from celing rose to fitting terminal, fixing the fitting on ceiling including cutting , grooving with proper finish and making good , disturbed surface with all necessary fixing arrangment complete all as directed,(make-Havells /Wipro/ Philips).

Supply & fix LED Bulk Head luminaire 10W, 6000K pressure die cast housing with IP65 protection complete with electric connection & all necessary fixing arrangement as specified and directed by Engr-in-Charge.

Supply & fix Recessed mounted LED panel slim,compact,aluminium die castedge lite panel of 15 W with premium diffuser to ensure glare free & even distribution of light complete with electric connection all as specified and directed by Engr-in-Charge. ( Make:- Havells, Cat No. LHEBHEP7IZ1W015 or equivalent in Wipro/Phillips/Crompton.

Supply and fix in repairs Wall light fittings suitable for & including LED bulb of 7 watt (B-22), including connection with all necessary fixing accessories complete all as specified and directed by Engr-in-Charge. Make :- Havells Cat No. LHDL07150099 or equivalent in equivalent in Crompton, Philips.

S&F Decorative gate light (Prismatic), made up of high grade unbreakable polycarbonate material suitable for retrofit LED 1X/9W TU B22 base with all necessary fixing arrangement including connection & LED Bulb 09 Watts,complete all as directed. Make-Havells cat No LHFXAMN1TN6F035 or equivalent in/Crompton/Phillips.

Supply in repairs PVC rectangular blocks, for mounting,switch,sockets,fan regulator etc.with 3 mm thick plastic laminated sheet cover with closed recessed, designed and cutting module for fixing switches/sockets of any rating as directed by Engr-in-charge for the following sizes:-

(a) 100mm X 100 MM X 50 mm deep

(b) 175 mm X 100 MM X 50 mm deep

(c) 200 mm X 150 MM X 50 mm deep

S&F hylum sheet Incl cuttings module suitable for fixing 5/15 Amps switch/socket /fan regulator/indicator etc. of following sizes:

S&F in replacement 3 pin top, 5A, 240, beckelite, heavy duty suitable for 5A socket outlet complete all as directed.

S&F in replacement LED- Driver suitable for LED ceiling light fittings 34/36 watt (2'x2') recess mounting type complete with electric connection at both Input (a.c.) and output (d.c.) side,all as specified and directed by Engr-in-Charge. (Make: As per make of existing LED ceiling light at Site)

S&F in replacement LED- Driver suitable for LED ceiling light fittings 40/42 watt (1'x4') recess mounting type complete with electric connection at both Input (a.c.) and output (d.c.) side,all as specified and directed by Engr-in-Charge.(Make: As per make of existing LED ceiling light at Site)

S&F in replacement LED- Driver suitable for LED Building Security light fittings 25 watt complete with electric connection at both Input (a.c.) and output (d.c.) side,all as specified and directed by Engr-in-Charge. (Make: As per make of existing LED Bldg. light at Site)

S&F in replacement LED- Driver suitable for LED Building Security light fittings 15/18 watt complete with electric connection at both Input (a.c.) and output (d.c.) side,all as specified and directed by Engr-in-Charge. (Make: As per make of existing LED Bldg. light at Site)

M&L for Sub main wiring in repairs with two runs of single core FR PVC insulated unsheathed cable 1100 volts grade, 10.0 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25 mm dia including one run of PVC insulated unsheathed 10.0 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed.

M&L for Sub main wiring in repairs with two runs of single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25 mm dia including one run of PVC insulated unsheathed 6.0 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed.

M&L for Sub main wiring in repairs with two runs of single core FR PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25 mm dia including one run of PVC insulated unsheathed 4 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed.

M&L for 3-Phase Sub main wiring in repairs with Four runs of single core FR PVC insulated unsheathed cable 1100 volts grade, 6.00 Sqmm size with multistranded copper conductor, drawn in suitable size of PVC casig-caping including Two runs of PVC insulated unsheathed 6.00 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed.

Supply and fixing GI pipe light grade 50 mm dia in short lengths, to walls/poles/pillers including cutting,chasing and fixing one end on walls/pillers/in ground for garden light fittings/gate light complete all as specified and directed.

Supply and lay XLPE insulated armoured heavy duty electric cable with stranded aluminium conductor 1100 Volts grade of size 16 sq mm 4 core, cross sectional area lay trenches/wall/poles/ducts/pipes or through sleeve etc including connecting/jointing with lugs and testing all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exc. 1.5m wide and not exc 1.5m deep in hard/dense soil and getting out complete all as specified and directed by Engr-in-Charge.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed.

Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed.

M&L for filling approved fine river sand in trenches as cable cushion to the full width of excavated trench , under and over cable complete all as specified and as directed. (Note : Punned thickness of sand shall be measured)

M&L for bricks slightly over burnt (kiln burnt) , modular bricks , best quality, locally available , laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection all as specified and as directed.

Supply & laying or fixing 1100 volts grade duty cable with PVC insulated aluminium conductor served with an inner sherthing of PVC tape overall PVC sheathed cable size 4 mm twin core flat/circular cable.

All as per item no. 75 above but 6 Sqmm 2 core

M&L of earthing complete with GI steel earth plate electrode 60cm x 60cmx6.0mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 mtrs below level ground, connected to GI strip 32x6mm by means of nuts, bolts checks nuts and washers made of GI earth wire protected by GI pipe 40mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 using 20mm graded aggregate, pre-cast RCC (1:2:4) type-B, over slab 30cmx30cmx10cm with one lifting handle made of 8mm dia MS bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 3 of MES schedule Part-I and testing after completion.

MODI CORPORATION

SAHYOG ELECTRIC

Auto Traders

yash enterprises