SCHOOL IMPROVEMENT GRANT WORKS 2022-23 AND 2023-24 - Toilet Construction - Belur Town Panchayat - Salem Dt

Amount

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 Mix (one Part of cement, four Part of M- Sand and Eight Part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Collection supply and filling of Stone Dust of approved quarry including cost and Conveyance of all materials to site and all labor charges for filling etc., Complete.

Supplying and filling conveyed gravel other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification

Brick work in CM 1:6 (one cement & Six sand) using Fly Ash Bricks 230 x 110 x 70mm including finishing, curing,etc., complete complying with standard specification In Cement Mortar 1:6

For Foundation and Basement.

For Superstructure in Ground floor

For Superstructure in first floor

For Superstructure in Second floor

Brick work in CM 1:6 (one cement & Six sand) using Fly Ash Bricks 230 x 110 x 70mm including finishing, curing,etc., complete complying with standard specification In Cement Mortar 1:5 For Foundation and Basement.

Brick work in CM 1:6 (one cement & Six sand) using Fly Ash Bricks 230 x 110 x 70mm including finishing, curing,etc., complete complying with standard specification In Cement Mortar 1:3 For Superstructure in Second floor

Damp proof course with Cement Mortar 1:4 (One Cement and Four sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used and finishing, curing etc. complete complying with standard specification.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance using 20mm with IS:456-2000, and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/ms and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu'm') 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

For Foundation and Basement.

For Superstructure in Ground floor

For Superstructure in first floor

For Superstructure in Second floor

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Brick partition walls of 10.80cm thickness using best quality Fly Ash Bricks b) 230 x 110 x 70mm in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)

In Ground Floor 11.00 cm thick.

In First Floor 11.00 cm thick.

Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Paving the Top of roof with Solar Reflective ceramic tiles (Required design) of 305x305x8mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Cement Concrete 1:5:10 (One cement, Five sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

Manufacturing supply & fixing of STEEL DOORS with following specification.MS angles of size 40x40x6mm 3.5 kg/m are used for the outer frmae and MSangles of size 35x35x5mm @ 2.6 kg/m for the shutter frames.Stiffeners with 32x6mm @ 1.5 kg/m MS flat is provided as the lockrail of the door and welded infact on both ends to the shutter frames.18 g CR sheets of best quality is laid as panel in the shutter frames.18 x 5mm @ 0.7kg/m MS flat is welded over the 32x6mm @ 1.50 kg/m MS that on the rear side of the door sandwitching the CR sheet for diagonally on the rear side of the shutter. The rate include coat of all materials, labour charges, transportation, taxes and all other incidental charges etc, complete.

a) Single leaf

b) Double leaf

Maniufacturing, supply and fixing of STEEL ENTRANCE DOOR with the folowing specification. MS angles of size 40x40x6mm @ 3.5 kg/m are used for the outer frmae and MS angle of size 35x35x5mm @ 2.6 kg/m for the shutter framed. Stiffeners with MS flat 32x6mm @ 1.50 kg/m is provided for fixing the aldrop for the door and welded intact. 18 gauge CR sheet is laid as panel in the shutters and welded intact for 1/3 bottom portion of the shutters.MS flats are provided as per design and laid upper pannel should be approved by the departmental officers. MS flat 32x3mm @ 1.10 kg/m is provided over the edge of one shutter, in case of a double door, to conceal the gap between the shutters. 2 Nos of hinges in case of single leaf and 4 Nos. of hinges in case of double leaf doors are provided at an appropriate place in the outer frame 6 Nos.of holdfasts of 120mm in length spliced at the ends are welded to the outer frame of the door. Tower bolt 2 Nos. one at top and the other at bottom are provided. In case of double leaf door one number aldrop is provided at an appropriate place in the door & two numbers aldrops in single leaf door, one rotating locking arrangements at the inner side of the door and additional provision for locking arrangements for locks is provided on the rear side of the door at an appropriate place, in case of a suitable leaf door. A tie bar is provided at the bottom of the outer frame to ptevent twisting of frame during transportation or fixing. All members are given a shop coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, taxes, transportation to site of work, loading, unloading, and all other incidental charges, etc, complete. STEEL ENTTRANCE DOOR

Manufacturing and supplying and fixing of STEEL WINDOWS and ventilators of the following specifications. The outer frames of windows are made of Z section ( F7D ) of size 33 x 22 x 3 mm @ 1.419 Kg/m and mullions of ' J ' section ( F4B) of size 46 x 22 x 3mm @ 2.28 Kg/m shutters made out of F7D section of size 33 x 22 x 3 mm @ 1.419 kg/m. Each openable shutter should not exceed a width of 600mm to enable separate operation and easy maintenance. 2 Nos of sturdy hinges and one no. of handle cum latch of special type made with 18 x 5 M.S. flat are riveted to the shutters at an appropriate height in the window. Suitable opening is left for it's easy operation. A stopper square rod for handle is provided in the mullion section at an appropriate place.One No. of adjustable window stay made of 18 x 5mm @ 0.70 kg/m M.S. flat of length 320mm with three adjustable positions are provided in the openable shutter.A matching peg is provided in the outer frame of the window at an appropriate plane.4 Nos of hold fast of 120mm length spliced at the ends are welded to the outer frame of the window. 18 x 5mm @ 0.7 kg/m M.S.flat is welded to the shutter at two place equidiatant from each other from top and bottom of the shutter at two place equidistant from each other from top and bottom of the shutter frames and welded intact. Stiffeners with 18x5mm @ 0.7 kg/m MS flat of length 80mm, is welded diagonally to all four corners of each openable shutter to hold the CR sheet in position firmly. M.S. square bars of 12mm size is welded to the inner face the window at equal intervals not exceeding 100 mm edge between them. All members are painted with one coat of anticorrosive red oxide primer as directed by the departmental officer. All sections used should confirm to I.S. 7452 / 1990. The cost includes cost of all materials, labour charges, transportation to departmental stores, taxes and other incidental charges etc, complete. Three Leaf

Supplying and fixing in position steel balustrades using 20mm square rods spaced at 150mm centre to centre so that the two balustrades in each step shall be placed centrally and the top of balustrades connected with the hand rails (cost of hand rail shall be measured and paid separately) by means of MS flats of size 40mm x 6mm in the groove 40mm x 6mm provided at the bottom of hand rail; the bottom of balustrades shall be fixed on to the top of step concrete. An additional MS flat of size 50mm x 6mm shall be provided at the centre of balustrades connecting all square rods to the entire length including cost of square rods, flat and applying one coat of red oxide primer to the iron surfaces, etc., complete complying with standard specification and as directed by the departmental officers.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia ntermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing,

Paving the floor with best quality stainfree nano polish Vitrified Tiles of size 600 x 600 x 8mm of approved colour , shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be Johnson / Kajaria / Somany / Nitco / RAK which has to be got approved by Executive Engineer before use on works)

Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.

Dadooling walls with Colour designed digital print ceramic tiles, with borders, with size of 300mm x 450mm x 8mm and above set in Cement Mortar 1:2 (One Cement and Two sand ) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors , curing etc., complying with standard specification and as directed by the departmental officers . (The make and brand of the tiles should be like Johnson / Kajaria / Somany / Nitco / RAK or Equivalent which has to be got approved by Executive Engineer before use on works)

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Casting and fixing of RCC Precast slab of the following thickness in cement concrete 1:2:4 (one cement two sand and four aggregate) excluding the cost of reinforcement grill in position but including moulding charges casting of slab finishing, curing and fixing the precast slab in position in cupboards, record rack, kitchen, platform etc., complete complying with standard specifications. 50mm thick slab (using 20mm HBGS Jelly)

Plastering with cement mortar 1:5 (one cement and five sand) 12mm. thick in all floors complying with standard specifications.

Special ceiling plastering and finishing all the exposed surfaces such as RCC slabs, sunshade, facia, canopy slabs, staircase steps, landing slabs,etc., with cement mortar 1:3 (one cement and three sand)10mm.thick including hacking the surfaces and providing cement mortar nosing beading as per standard specification wherever necessary using the ssame mix as directed by the Departamental officers etc., complete complying with standard specifications.

Plastering with cement mortar 1:3(one cement and three sand) 12mm. thick mixed with water proofing compound conforming to ISS at 2% by weght of cement used for dummy column etc., complete complying with standard specifications.

Providing Blockboard in two layers with first layer in cement mortar 1:5 (one cement and five sand )20mm thick and the second layer in Combination mortar 1:1:6(one cement one lime and six sand) 20mm thick and providing band all round the block board in c.m 1:5 (one cement and five sand) for 20mm thick and 50mm width including cost of one coat of block oxide paint of approved quality complying with standard specification.

White washing one coat with freshly burnt white shell lime in all floors including cost of lime, blue powder, fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the departmental officers.

Painting two coat over new iron works such as steel doors, windows, ventilators, window bar, balustrades, etc., with best approved first quality synthetic enamel paint of approved colour over the exisitng red oxide priming coat in all floors.The rate is inclusive of all materials, brushes and scaffolding charges etc., complete complying with standard specifications.(Paint should be got approved by the Executive Engineer before use on work).

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying,laying,fixing and jointing the following size of "B"class G.I.pipes of approved quality and best variety above Ground level including fixing of G.I.specials but excluding cost of such specials and cutting and threading of pipes and also fixing to the wall with necessary T.W.plugs,Clamps and Screws making holes on the wall or drilling holes in roof and making good of the disturbed portions to Original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. The pipes are to be painted with two coats of good variety and best quality synthetic enamel paint over a coat of red oxide primer etc.,complete complying with standard specification. (The above ground level) For Externall water supply a 25mm dia GI pipe

Supplying, laying,fixing and jointing the following size of "B"class G.I.pipes of approved quality and best variety below ground level and laid properly to alignment including fixing required G.I.Special but excluding cost of such specials and cutting and threading pipes. The rate is inclusive of necessary earthwork excavation of size 40cms.width to an average depth of 50cms.including sand filling to a depth of 15cms. The pipe is to be covered with tar dipped gunny tapes and the trench refilled with a excavated earth etc.,complete. For external water supply c) 32mm dia GI pipe

Supplying,laying,fixing and jointing the following size of "B"class G.I.pipes of approved quality and best variety above Ground level including fixing of G.I.specials but excluding cost of such specials and cutting and threading of pipes and also fixing to the wall with necessary T.W.plugs,Clamps and Screws making holes on the wall or drilling holes in roof and making good of the disturbed portions to Original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. The pipes are to be painted with two coats of good variety and best quality synthetic enamel paint over a coat of red oxide primer etc.,complete complying with standard specification. (The above ground level) (b) 25 mm dia GI pipe

Supplying and fixing in position best qualtiy and approved variety with ISI.mark Gun Metal Wheel Valve/Gate valve of the following die including necessary charges for cutting and threading of G.I.pipes for jointing the Gate valve in position etc., complete complying with standard specification. (Gun Metal Gate Valve/Wheel Valve should be got approved by the Executive Engineer before use on work) 25mm G.M Gate Valve

Supplying and fixing in position long body 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing in positon PVC Soil pipe of 6kg/cm2 best approved quality and brand conforming to ISS of the following diameter and provding leak proof joints with PVC adhesive etc., including fixing to the wall with necessary TW plugs, brass scews, miled steel clamps etc., and giving connection to the sanitary fittings including dismantling brick masonry RCC floors or roof slabs etc., wherever found necessary and making good .the disturbed portion to the original condition etc., complete complying with standard specifications.(The PVC pipe should be got approved by the Executive Engineer before use on work).

110mm dia PVC pipe

75 mm dia pvc pipe

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications

Supplying and fixing in position best quality approved make white glazed earthernwere sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works]

Supplying and filling 40mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.

Supplying and filling 20mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.

Supplying and Fixing of Brass Dye Cast letters of following size to suit the Architectural elevation drawings given for the including Cost ,conveyance and all other materials and Labours involved etc., complete and as directed by the Department Officers. Emblem 15" dia

Supplying and Fixing of Aluminium Dye Cast Letters of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes. etc., complete and as directed by the Department Officers.

Dyecast letters 6" size

Dyecast letters 9" size

Providing Anti-termite treatment to soil adjacent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 Part I to IV in stages to suit the progress of work consist as per the detailed specification as below. (Measurements taken for the plinth area for the purpose of payment) including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing, etc., complete and as directed by the departmental officers. (The chemical should be got approved by Executive Engineer before use on work). Ground Floor

Supply and fixing of Water CO2 Stored Pressure Type 9 litres capacity Fire Extinguisher as per new IS 15683 complete with control valve, gun metal cap, pressure gauge, operation sticker, discharges hose, wall mounting bracket, safety clip, etc., as directed by Departmental Officers.Sl.No: 330

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylem sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan Point (For electronic regulator) (5 Points/Coil) [SD-25]

Supply and fixing of single box type 4'36 W flu fitting complete with electronic Ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. [SD-87]

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp. (SD-110)

Supply and fixing of 300 mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall.(SD-114)

Supply and fixing of louvers shutters arrangements for 300 mm (12") sweep (light duty) AC exhaust fan..(SD-120)

Supply and fixing of 30W Outdoor LED street light flu. fitting complete with 19mm dia GI pipe (Class 'B') with 1 No. 19mm GI Bend complete on the existing post / wall With 16 A aerial fuse unit on MS plate with PVC unsheathed Cu. leads, with MS clarnps and aluminium painting.(Philips/Equivalent) (Data-A).

Supply and fixing of 32A TPN MC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only (supply Point ). (SD-164)

Supply and fixing of 5A 3Pin and 2pin combined flush type wall socket with 5A flush type switch on suitable TW box. [SD-133]

Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch on suitable TW Box (SD-136)

Supply and fixing of 3 Nos. 5Amps (3 Pin and 2 Pin) combined flush type wall socket with control switches concealed in suitable TW Box covered with Hylem sheet in flush with wall with earth connection (For Computer Plug Socket) (SD-139)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure with metal door distribution board (Double door) 1 No 32 Amps DP MCB as incoming and 6 Nos 6 Amps to 32 Amps SP MCB outgoing inflush with wall and making good of the conceled portion with earth copnnection only. The MCB DB and MCB'S should be with ISI make. ( Like IndoAsian make /equivalent) (For lighting LDB ) ( SD : 167 )

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board with sheet steel enclosure Double Door(Metal) with 40A 4 pole MCB isolator as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB’s should be with the ISI mark (like standard make)( SD : 179 )

Supply and run of 2 of 2.5sqmm (36/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour (CP plugs ) (Data-B)

Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour.(8 way SPN DB's and 15A plugs )[SD-57]

Supply and laying of 4 x 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.(From Exsisting Building to Proposed building)(SD-203)

Supply and clamping of 4 x 16 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.(SD-221)

Supplying and fixing MS grill to doors windows and ventilators etc. as directed by the departmental officers inclusive of cost of MS grill and labour charges including one coat of red oxide and fixing in position etc. complete

Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos., for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work. (Plain Pre-laminated Door) PWD SOR Sl. No. 268-a

Plastering with cement mortar 1:3 mix, 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete .

Flooring with Scratch ceramic tiles of approved Colour and quality of size 305mm x 305mm x 6mm in cement mortar 1:3 mix, 20mm thick and pointing with the same mortar etc., completely and finish very neatly

Supply and fixing in position of European water closet with 'S' (or) 'P' trap of approved color and quality with dauble flapped rigid PVC sheet cover the CP brass hinges etc., complete complying with standard specification including supply and fixing in position of 10litre capacity glazed porcelain low level flushing tank on wall including 2 Nos of 15mm & brass nipple, 15mm dia PVC brass connection, 15mm dia GI wheel value, 15mm dia Nylon connection and giving necessary water supply connection etc., complete

Supplying and fixing in Position of Indian Oriya pan type water closet with “P’’ or “S’’ trap to set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.

S/F in position of Indian Make White/Colour glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I.Pipe connection to suitable length,32mm bell mouthed P.V.C connection ,15mm dia G.M.Wheel valve,fixing the urinal to the wall in position with necessary T.W.plugs ,clamps,screws, shellac etc.,including dismantling masonry if necessary and redoing the same to original condition ,fixing the 15mm dia. G.I.pipe connection and wheel valve ,painting the pipe with two coats of approved paint over one coat of primer and checked without any leakage complete, complying with standard specifications. - White Colour

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x for open PVC plug point.inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for PVC Plug Point (SD-36)

Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 63mm TW switch box for 15 A 3 pin non inter locking CS plug with painting of suitable colour, with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point. (SD-39)

Supply and fixing of single box type 4'x18w crystal glass LED Tube light with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. (SD-88)

Supply and Fixing of WT Bulk Head Fitting with guard (Philips / Bajaj / K. Lite) Suitable for 11W CFL Lamp with CFL (SD-83)

Supplying and fixing in position P.V.C. specials such as plain bend, door bend, plain tee, door tee, offsets,Y-junction, plain or with door of various sizes best quality confirming to I.S.S and providing leakproof joints including fixing to wall and giving connection to the P.V.C, soil stacks, dismadling the brick masonry or R.C.C. floor or Roof slab and redoing the dismandled portion to original condition etc., complete complying with standard specifications. As per IS 4985 / 2000 and IS 10124 / 1982 Part II

110mm Dia PVC Pipe 6 Ksc (IS 4985 / 2000)

110mm Dia PVC Elbow (IS 10124 / 1982)

110mm Dia PVC Tee (IS 10124 / 1982)

110mm Dia PVC Bend (IS 10124 / 1982)

90mm Dia PVC Pipe 6 Ksc (IS 4985 / 2000)

90mm Dia PVC Elbow (IS 10124 / 1982)

90mm Dia PVC Tee (IS 10124 / 1982)

90mm Dia PVC Bend (IS 10124 / 1982)

Geological investigation charges preparation of geological survey report etc., complete

Drilling of 150mm Dia bore well in hard rack area in including labour charges for drilling and development charges for erection of caching pipe in over burden soils all cost and conveyance etc., complete

a). Drilling of 150mm Dia Bore wells in overburden soil including labour charges for insertion of casing pipes.

b). Drilling of 150mm Dia Bore wells in hard rock areas including transportation to the work site in hard rock areas and developing the bore wells

Supply and fixing of 2HP Single phase Submersible Pumpset (20x150) as per 8034/2002 without panel board etc. complete

Supply and delivery of direct online starter confirming to IS13947and IEC60947- suitable KW rating for operationin AC/single Phase / 50HZ(±5%) and230V(±10%) including Ammeter, Voltmeter, Thermal Over load relay,16Amps 2pole Magnetic Contactor with under Voltage protection, Indication lamp,starting capacitor, running capacitorand On/Off Push button switches, 5way connector, wiring with 1sq.mm/1.5sq.mm copper PVC insulatedcable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).

Supply and Delivery of following specials with ISI making as per standard specifications

150mm CS Casing PVC Pipe

32mm HDPE Hose

32 mm Bore Clamp Set

Nylon rope for borewell

2.5 Sq.mm copper cable

160mm PVC End cap

2000 Liter HDPE Tank

25mm Dia GI Pipe (IS 1239 / Part-I / 90)

25mm Dia GI Coupling (IS 1239 / Part-II)

25mm Dia GI Elbow (IS 1239 / Part-II)

25mm Dia GI Tee (IS 1239 / Part-II)

25mm Dia GM Gate Valve (BS 5154 and related spec)

20mm Dia GI Pipe (IS 1239 / Part-I / 90)

20mm Dia GI Coupling (IS 1239 / Part-II)

20mm Dia GI Elbow (IS 1239 / Part-II)

20mm Dia GI Tee (IS 1239 / Part-II)

20mm Dia GM Gate Valve (BS 5154 and related spec)

15mm Dia GI Pipe (IS 1239 / Part-I / 90)

15mm Dia GI Coupling (IS 1239 / Part-II)

15mm Dia GI Elbow (IS 1239 / Part-II)

15mm Dia GI Tee (IS 1239 / Part-II)

Brass chromium plated pillar Tap (Heavy type)- 15/12mm Dia

Supply and fixing of brass cable gland for 4 x 16 sq.mm PVC armoured LTUG cable, with earth connection.(as per SD:185)

Supply and run of 1 of No.8 Hard drawn copper in suitable PVC rigid pipe concealed in wall and painting of suitable colour.[DATA-C]

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.[SD-233]

RG AND CO