WBPWD/EE-II/CKHED /eNIT-99/24-25 2nd call

Amount

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (RR Cable/KEI/ Polycab) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/ Perspex (wall matching colour) top cover 3 mm thick and incl.175mmx100mmx 65 mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish as to GS. [Vide page no-E-14,item no-2 ]

Average run 8 mtr [Vide page no-E-14,item no-2(C)]

On board [Vide page no-E-15,item no-4(a)]

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Make:- Anchor) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [E-4/10d, 12e, E-5/14a,b, E-5/15a,b)]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [ D-9,13 ] Incoming - 230V,40A, DPMCB Isolator (1-nos) [D-5,6] Outgoing - 10KA, (C-characteristics) 6-32A, SPMCB (12-nos) [D-6,7]

2+12 way [Legrand/ L&k]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [D-10, 14] Incoming - 415V,63A, FPMCB Isolator (1-nos) [ D-5,6 ] (1-nos) Outgoing - 10KA, (C-characteristics) 6-32A, SPMCB (18-nos) [ D-6,7 ]

6 way [Legrand/ L&k]

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [ D-11,15 ] Incoming - 415V, 25/35KA, 125A, FPMCCB (1 -nos) [ D-8,10 ] Outgoing - 10KA, (C-characteristics) 63A, (6 -nos) [ D-7,8 ]

6 way [Legrand/ L&T]

S & Laying 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire(RR Cable/KEI/ MESCAB / POLYCAB/Gloster) as approved by EIC) with S& F 20mm dia PVC rigid conduit as to G.S.

3x1.5sqmm (E14/1a/i)

2x2.5+1x1.5sqmm (E14/1a/ii)

2x4+1x2.5sqmm (E14/1a/iii)

2x6+1x4 sqmm (E14/1a/iv)

4x16+2x10 sqmm (E9/1g1, E16,7b)

Supply and Delivery of 1.1 KV grade following sizes Al. armoured PVC/XLPE cable (Gloster/Havells/polycab) as mentioned below as per choise of EIC.

a) 4 Core 70 sqmm

Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting. [F-1,2(d) ]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [ F-5,9 ]

2x2.5 sqmm+1x 1.5 sqmm ECC [ F-5,9(i)]

2x4 sqmm+1x 2.5 sqmm ECC [ F-5,9(ii&i)]

2x6 sqmm+1x 4 sqmm ECC) [ TPNDB to SPNDB ] [ F-5,9(iii&ii)]

4 x 16 sqmm + 2 x 10 sqmm ECC [ F-5,9(iv&v)]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes,anticorrosive paste & jointing materials. [ F-5,8(b) ]

4 Core 70 sqmm [ F-5,8(b,xvii) ]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. [ F-4,7 ]

4 Core 70 sqmm [ F-4,7(c) ]

Supply & delivery of 48'' sweep, 230V, 1-phase AC ceiling fans incl. all accss., the capacitor of fan must be P-2 type brust proof & must have safety wire directly linked from fan hook to stator of fan, complete with blades, canopy, fork, rubber bush etc. [Make:Crompton-rivera High Speed with safety wire or equivalent cat of Orient) --- Color-Brown] [Ref.: Non Schedule ]

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and necessary arrangement if required and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) [D-14,29]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [ C-3,21a ]

Supplying & Delivery of 250 volts, 50Hz, 300 mm(12 inch) 1420 R.P.M. heavy duty exhaust fan complete with all accessories after making hole on wall and mending good damages as per practicable incl.(Make-EPC) as to Gs.

Supply & Fixing GI sheet (20SWG) 300 mm(12 inch) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long) [D-14,33 ]

Fixing only 300 mm(12 inch) exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: [C-4,28 ]

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with S & F “L” /"Z" type (125mmx125mm) 6mm thick and 25mm width MS clamps with S & F suitable size 4 nos. fastener and other side connected with the light fittings with suitable size of bolts and nuts incl. and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 3x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 3x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [C-2/16]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.) [E-19,17 ]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy.connections with PVC Cu wire and earth continuity wire etc (E17, 5a)

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board. [ D-13,20a ]

S & f of 415V FP 160A MCCB (Legrand/Scneider/Approved make) of beaking capacity 35kA with adjustable thermal and fixed magnetic setting with S & F enclosure as required. (D-8/10)

S & f of 240V socket & step type fan Regulator on existing switch board as to GS.

S & F (2+4) way SPNDB with S & F 415V, FP 63A MCB type change over on wall including making necessary connection as required. (D9/13, )

Supplying & Delivery of following 250 Volt, T8, 18/20 Watt, 4 Ft. long Double LED Tube fittings complete with LED tube lamp in built driver&metal heat sink(LT8-20-865-(2)) having at least 100 lumen/watt and cast iron box type fittings.(Make- Philips cat no- TMC 502 P 2xT-LED 18/20W P3241 / Wipro similar make))

Supplying, fabrication & fixing M.S u-channel of 6 mm thick of size (75 mm x 40 mm x 40 mm) for making platform for installation of outdoor unit of Concealed split AC incl. drilling 2 nos holes in each channel including cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. fabricated with horizontal angle of 25 mm x 25 mm x 6 mm including supporting angle 50 mm x50mm x 6 mm in each platform in outer edge for transmitting the load centrally through 2Nos. (50 mm x 50 mm x 6 mm) Angle inserted into the exiting wall. The entire structure should be barricaded & safe for ODU maintenance. Area of the platform is 3Mtr. x 1.2Mtr. Structural design should be approved by E.I.C.

Supply & Delivery of 2 TR capacity concealed type Split Air Conditioner of rated cooling capacity of 24000 BTU/hr. with 1 Nos. rotary compressor, refrigerant R-410/R-410A,/R32, 1 nos. IDU of rated power supply-230V-1ph-50Hz. , 1no. ODU of rated power supply-230V-1ph-50Hz. Air-flow/per IDU:- 650CFM. (Make: Voltas/ Hitachi/ O General/ DAIKIN)

Supply & Delivery of 1.5 TR capacity concealed type Split Air Conditioner of rated cooling capacity of 24000 BTU/hr. with 1 Nos. rotary compressor, refrigerant R-410/R-410A,/R32, 1 nos. IDU of rated power supply-230V-1ph-50Hz. , 1no. ODU of rated power supply-230V-1ph-50Hz. Air-flow/per IDU:- 650CFM. (Make: Voltas/ Hitachi/ O General/ DAIKIN)

Copper Refrigeration pipe line for liquid and suction line with fittings, elbows, bends, supports & brackets (Make-Ryoku)

Liquid Line (1/4" OD with 0.6 mm thick)

Suction Line (5/8" OD with 0.7mm thick)

Supply & Fixing Pipe Insulation in liquid & suction line with 9mm nitrile rubber tube (Accoflex)

Liquid Line (1/4" OD with 0.6 mm thick)

Suction Line (5/8" OD with 0.7mm thick)

Installation, Testing & Commissioning of 2/1.5 TR concealed type Split Air Conditioner

S & F 4 core 2.5 sq.mm copper cable for communication from Condensing Unit to control panel (Make: polycab/RR Cable/finolex/ Gloster)

S & L of Drain Water piping work out of 3mm thick / Schedule 40 UPVC pipe of following sizes incl. fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors. (Make-Supreme/Astra/Ashirvad/Prayag) with S & F 9 mm Nitrile rubbr insulation(Accoflex/Armacell/Supreme).

25/32 mm dia

Charges for scaffolding arrangement incl. lifting for outdoor & indoor units

Rate should be quoted incl. of all taxes and cess.

Defect Liability period : 1 year

EFFORTECH (BID ID -6077142)

M/S. N.C. HORE (BID ID -6075572)