PROVN OF ONE GUARD ROOM AT POST NO 4 OF BANASWADI GRN UNDER GE NORTH BANGALORE

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard / dense soil etc complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and as directed

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and as directed

M&L for plain cement concrete 1:4:8 type D-2, with using 40 mm grades stone aggregates as in foundations and mass concrete etc complete all as specified and as directed

M&L for Reinforced cement concrete (M-25) Design Mix with using 20 mm graded stone aggregates as in Foundation, including rafts, footings, plinth beam etc complete all as specified and as directed

M&L for Reinforced cement concrete M-25 (Design mix) with using 20 mm graded stone aggregates as in slab supported on walls, beam and columns in floors, roofs landing balconies canopies etc complete all as specified and as directed

M&L for Reinforced cement concrete (M-25) Design Mix with using 20 mm graded stone aggregates as in beam, cantilevers, bressumers, lintels over 1.5 mtr span etc complete all as specified and as directed

M&L for providing reinforced cement concrete (M-25) design Mix with using 20 mm graded stone aggregates as in col, pillars, piers, posts and struts etc complete all as specified and as directed

Supply only Liquid water proofing compound

M&L for Pre-cast cement concrete block masonry, Type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6 , etc complete all as specified and as directed

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical with Rough finished surfaces of concrete (Flat) etc complete all as specified and as directed

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions with Rough finished surfaces of concrete (Flat) complete all as specified and as directed

M&L for Formwork to soffits and sides of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) with Rough finished surfaces of concrete (Flat) etc complete all as specified and as directed

M&L for formwork to sides and soffits of floor or roof beam, beam and haunching, girders, bressummers, lintels cantilevers, shelves including supports, overhangs etc also splays between floor and beam with rough finished etc complete all as specified and as directed

S&F Factory made 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

M&L for cement concrete 1:3:6 type C-0 (using 12.5mm graded aggregate) as in hold fast and filling of pressed steel chowkat etc complete all as specified and as directed

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 or Fe -E-165 etc complete all as specified and as directed

S&F 35mm thick flush shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face etc complete all as specified and as directed

S & F for solid PVC frame (Single Rebated) of size 50X47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded as specified and directed by Engineer-in-Charge. Note:- (i) 4 mm thick sheet glass/figured glass and 0.36 mm dia stainless steel wire mesh be measured and paid separately.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed NOTE (i) 4 mm thick figured glass and 0.36 mm dia stainless steel wire mesh be measured and paid separately.

S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S & F in repairs aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections including taking down old sliding door bolt 300 mm all as specified and as directed.

S&F for 100mm butt hinges, heavy weight, Stainless Steel of size 100 mm long and fixed complete as sepecified and directed

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

All as per item No 30 above but 6 to 8 mm dia etc complete all as specified and as directed

All as per item No 30 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and as directed

M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified and as directed

M & L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 complete all as specified and as directed

All as per item No 34 above but as in skirting /dado incl backing coat 10 mm thick in CM 1:3 complete all as specified and as directed

M & L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 i complete all as specified and as directed

M&L Glazed ceramic coloured tiles 300X450X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match incl backing coat 10 mm thick in CM 1:3 complete all as specified and as directed

M&L for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction finished even and smooth without using extra cement etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surface finished and smooth without using extra cement etc complete all as specified and as directed

M&L for preparing newly plastered surface of ceiling and applying three coat of white wash etc complete all as specified and as directed

M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed

M&L for preparation of new surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance (Apex Ultima), dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. etc complete all as specified and as directed

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

S&F 20 mm dia bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

S&F 25 mm dia bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

S&F rotational moulded PVC water storage tank 1000ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc completg all as specified and as directed

S & F 25 mm dia of bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed.

S & F 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe etc complete all as specifieid and as directed

S&F bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed

S&F Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed

S&F stop valves /Angle Stop cock fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed

S & F Towel rail rail, 20mm dia, D type, 60cm long between flanges of brass or chromium plated complete all as specified and as directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F Brass chromium plated shower rose 125mm size with arm flange including fixing to steel pipe or union complete all as specified and as directed.

S & F PVC connection 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.

S&F PVC urinal waste pipe 32mm dia 800mm long, complete all as specified and directed

S&F viterous china squatting pan orrisa pattern of size 580X440 mm white with integral foot rest 'P' trap including connecting to trap and flush pipe anti-symphonage pipe etc complete all as specified and as directed

S&F PVC flushing cistern with flush out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, etc complete all as specified and as directed

S&F 1Vitreous China wash basin, white, flat back, size 550x440mm excluding ditto but including bracketsPVC waste pipe 610 mm long and PVC connection 450 mm long complete all as specified and as directed

S&F Viterous China urinals, bowl type (back or corner wall type), including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe 40 mm bore waste stainless steel coupling and LDPE pipe 600 mm long complete.

M&L for Screed bed/rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

M&L for applying APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.60kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litr/Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed. complete all as directed.

S&F 75 PVC (SWR) Multi floor trap, plain with grating including jointing with solvent cement etc complete all as specified and as directed

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F 110mm PVC (SWR) pipes, single socketed in any length with rubber ring joint laid in trenches or in floor /Walls complete all as specified and directed

All as per item no.67 above but 75mm bore pipe complete all as specified and directed

S&F 110mm PVC (SWR) pipes, single socketed in any length with rubber rings joint fixed with wall complete all as specified and directed

All as per item no 69 above but 75 bore pipe complete all as specified and directed

S&F PVC (SWR) bends (any radius) of 110mm dia.

S&F PVC (SWR) bends (any radius) of 75mm dia.

S&F PVC (SWR) vent cowls of 110mm dia.

Filling under floors Spreading and levelling in well layers not exc 25 cm thick including watering as required etc complete all as specified and as directed. Note:- Soil obtained from excavation shall be reused under this item.

M&L for Hard core with broken stone or boulder of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15 cm thick water and rammed to a true surfac etc all as specified and as directed

M&L for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A" complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard / dense soil etc complete all as specified and as directed

M&L for rubber Moulded Pre-cast Kerb stones of cement concrete Type B-1 1:2:4 (with using 20mm graded stone aggregates) factory made, size, shape, pattern and finished as approved, including rounding, chamfered or half round and bedded of perfectly leveled surface pointed and jointed in CM 1:4 including fixing etc complete all as specified and a as directed

M&L for Preparation New Concrete surface of any description and appling with two coats of synthetic enamel paint over a coat of primer etc complete all as specified and as directed

M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment incl 50 mm thick M Sand cushioning etc complete all as specified and as directed

M&L for DWCPE pipe 180 mm outer diameter Pipes (SN8) laid on 150 mm thick bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional (Depth 0.70 to 1.65 m)

Construction of RCC Hume Pipe septic tank designed to carry sewage and sullage water For 10 users including excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete all as specified and as directed.

Construction of soakage wells 1.20 M dia x 3.00 M effective depth, excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25 / SFRC cover, interconnecting pipes of RCC / DWC complete filled with brick bats as per drawing uploaded complete all as specified and as directed.

S&F GI tubing medium grade 25 mm bore with all fitting laid in trenches/walls/Roads for cable protection.

S&F GI tubing medium grade 20 mm bore with all fitting laid in trenches/walls/Roads for cable protection.

S&F Gun metal Gate valve of size 25 mm dia with iron wheel.

S&F Gun metal Gate valve of size 50 mm dia with iron wheel.

S&F Float valve of size 20 mm dia with PVC body aluminium float rod, nylon float high pressure type (Make:- Prayag).

M&L valve pit complete with deteriorated MS cover and Construction of brick massonry valve pit chamber of inner dimension 100x100x100 cms suitable for sluice valves upto 150mm size, with PCC 1:4:8 type D-2 for foundation, brick work in cm 1:6 rendering 1:4, 15mm plastering, coping in PCC 1:2:4 type B-1, incl necessary earth work, including MS sheet cover of thickness 3.15mm on 50x50x6 mm angle iron framework including two coats of synthetic enamelled paint over a coat of red oxide primer with making provision of locking arrangement complete all as directed.

M&L for sand cushioning with M sand under and above the cable complete all as specified and as directed. Note: - Punned thickness will be measured for payment.

S&L sub class burnt bricks for cable protection complete as specified as directed

S&L XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 16 Sqmm, 4 core laid in trenches/wall..

S&F GI tubing light grade 40 mm bore with all fitting laid in trenches / walls / Roads for cable protection .

S&F MCB TPN 415 V 10KA 'B' curve 40 Amps complete all as specified and as directed

Point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit medium grade ISI marked incl accessories incl GI/ MS branded sunken boxes of suitable module concealed on walls including modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular type switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed for the following :- One light point controlled by one switch

All as per item No. 95 for above but One fan / exhaust point controlled by one switch / regulator

All as per item No. 95 for above but One 3 pin socket out let 5 A on same board

All as per item No. 95 for above but One 3 pin socket out let 5 A on independent board Note for Item No 95 to 98:- (i) The earth wire for the points in the same circuit can be looped from point to point (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring.

S&F LED batten suitable for indoor applications 18/20 Watts, 4 feet with extruded aluminium housing & integrated LED channel rectangular white arcylic cover complete with all accessories all as specified and directed. Make: Bajaj, Cat No.BCLAB 18 WH LED P or equivalent Makes & model.

S&F LED batten suitable for indoor applications 10 Watts, 2 feet with polycarbonate housing & integrated LED channel rectangular white arcylic cover complete with all accessories all as specified and directed. Make: Bajaj, Cat No.BCLSB 10 WH or equivalent Makes & model.

Supply and fix Modular switch 1 way 6A,1 module

Supply and fix Modular Socket, 6A - 2/3 pin combined 2 module

S&F MCB TPN 240 volts 32 Amps complete all as specified and as directed

S&F MCB single pole 240 volts 6 to 32 Amps complete all as specified and as directed

Supply and fix Modular Fan step regulator, 120W - 2 module

S&F MCB DB SPN 8 way double door type 240 volts with 200 Amps rated busbar as specified and as directed.

S&F ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed.

S&F 30W LED bldg security light fitting with pressure die cast housing along with prismatic polycarbonate difuser with IP 66 protection. Make:- Bajaj, Cat No.:- ENXT P 30L WH SY PC SD or Equivalent Makes in Philips/CG/Havells.

S&F Bracket made out of GI tubing medium grade 25 mm bore, approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm, nuts, bolts, washers etc and including before fixing applying two coats of aluminum paint over a coat of red oxide primer complete all as specified and directed.

S&F ceiling fans with complete accessories, 230V, SP 1200 mm Sweep with BEE 3 Star rating complete with all accessories and fixing the fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm, etc all as specified and as directed.

S&F Exhaust Fan, steel body AC single phase, 230V of size 200mm Sweep with, blade and frame and louver all as directed.