RENOVATION OF VRADA FLOOR REPAIR OF SEWER SYSTEM REPAIR OF OUTSIDE WALLS SCHOOL REPAIR OF COMPUTER LAB, REPAIR OF FURNITURE AND WHITE WASH AT SCHOOL OF EMINENCE BHARGO CAMP AT JALANDHAR (RANGLA PUNJAB SCHEME)

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority :- EXECUTIVE ENGINEER PROVINCIAL DIVISION PWD B&R JALANDHAR

Name of Work :- DNIT FOR RENOVATION OF VRADA FLOOR REPAIR OF SEVER SYSTEM REPAIR OF OUTSIDE WALLS SCHOOL REPAIR OF COMPUTER LAB, REPAIR OF FURNITURE AND WHITE WASH AT SCHOOL OF EMINENCE BHAGO CAMP AT JALANDHAR (RANGLA PUNJAB SCHEME)

Contract No: Civil Works

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Work Name Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 CIVIL WORK 43

2 Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 44 Sqm Excess(+) Full Conversion INR

3 Dismantling cement conglomerate floors 25mm to 50mm thick without concrete base 45 Sqm Excess(+) Full Conversion INR

4 Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100 mm fine sand filling using mechanical mixer for mixing of material 46 Sqm Excess(+) Full Conversion INR

5 Screed of 50mm thick cement concrete 1:8:16 with stone aggregate with stone aggregate to be laid below the topping using mechanical mixer for mixing of material 47 Sqm Excess(+) Full Conversion INR

6 Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 48 Sqm Excess(+) Full Conversion INR

7 Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) 49 Sqm Excess(+) Full Conversion INR

8 Scraping (a) White wash and colour wash 50 Sqm Excess(+) Full Conversion INR

9 Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish 51 Sqm Excess(+) Full Conversion INR

10 Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M- 35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in- Charge 52 Sqm Excess(+) Full Conversion INR

11 Cement concrete 1:2:4 With stone ballast or shingle mixing by manual means 53 Cum Excess(+) Full Conversion INR

12 Grifty Work On Wall 54 Sft Excess(+) Full Conversion INR

13 ELECTRICAL WORK 55

14 RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): 56

15 Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- 57

16 Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height. 58 2 Each 826.79 Excess(+) Full Conversion INR

17 RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): 59

18 Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- 60

19 Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16 Amp. switch with indicator and 1No. blanking plate (Modular accessories). 61 6 Each 707.95 Excess(+) Full Conversion INR

20 RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): 62

21 Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- 63

22 Wiring Networking socket point RJ45 (one module) 64 6 Each 461.43 Excess(+) Full Conversion INR

23 RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: 65

24 Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- 66

25 Wiring fan point (Without fan box) 67 36 Each 1091.69 Excess(+) Full Conversion INR

26 Wiring light point 68 48 Each 762.47 Excess(+) Full Conversion INR

27 Wiring 6Amp. wall socket point 69 11 Each 618.93 Excess(+) Full Conversion INR

28 Wiring 6Amp. Plug control comprising wall socket point 70 12 Each 371.36 Excess(+) Full Conversion INR

29 Wiring 16/20Amp. power plug control point 71 5 Each 478.03 Excess(+) Full Conversion INR

30 Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- 72

31 Overall size 1.5sq.mm (Un-sheathed) 73 60 P.mtr 30.34 Excess(+) Full Conversion INR

32 Overall size 2.5 sq.mm (Un-sheathed) 74 120 P.mtr 45.51 Excess(+) Full Conversion INR

33 Overall size 4sq.mm (Un-sheathed) 75 P.mtr 65.74 Excess(+) Full Conversion INR

34 Overall size 6sq.mm (Un-sheathed) 76 300 P.mtr 91.02 Excess(+) Full Conversion INR

35 COPPER CONDUCTOR CABLES FOR SPECIAL ELECTRICAL SERVICES: 77

36 Supply and erection of CAT 6 with 23AWG solid bare copper conductor, special grade PE insulation with star separator, 4pair Unshielded Twisted Pair (UTP) industrial cable, FR PVC sheathed, Class-E, 250 MHz of bandwidth, supporting data transfer speeds of up to 10 Gbps (10GBASE-T) for distances up to approximately 180 feet, cables are manufactured and tested to meet the ANSI/TIA 568-C.2 and ISO/IEC 11801 Class E standards left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- 78

37 CAT 6 LAN cable 79 150 P.mtr 45.3 Excess(+) Full Conversion INR

38 PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- 80

39 Heavy Gauge PVC Conduit Pipe 40mm dia. (Flushed) 81 20 P.mtr 128.32 Excess(+) Full Conversion INR

40 Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) 82 40 P.mtr 70.8 Excess(+) Full Conversion INR

41 MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- 83

42 MCB Single Pole 6-32amp. (10kA, Curve-C) 84 26 Each 211.75 Excess(+) Full Conversion INR

43 MCB Triple Pole 50, 63amp. (10kA, Curve-C) 85 4 Each 1472.79 Excess(+) Full Conversion INR

44 MCB Four Pole 50, 63amp. (10kA, Curve-C) 86 2 Each 1945.29 Excess(+) Full Conversion INR

45 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color- coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- 87

46 TP&N Horizontal Double Door Distribution Board 4 way each 88 2 Each 3592.17 Excess(+) Full Conversion INR

47 SP&N Double Door Distribution Board 4 way each 89 1 Each 1101.28 Excess(+) Full Conversion INR

48 Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:- 90

49 TP&N Double Door Vertical DB's 4 way each (With provision of FP MCCB upto 125amp) 91 1 Each 7638.67 Excess(+) Full Conversion INR

50 MCCB's (FOR PANELS & SHEET ENCLOSURE): 92

51 Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:- 93

52 MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting 94 1 Each 8297.89 Excess(+) Full Conversion INR

53 ON LOAD CHANGEOVER SWITCH (Without Sheet Enclosure): 95

54 Supply and erection of On Load Change over Switch with advance neutral UNIT (Panel mounting Cubical type) in the existing Cubical Panel Confirms to IS 13947 (Part-3) complete with G.I. Bolts, Nuts & Connections on both sides of switch with suitable size of thimbles as per PWD General Specifications:- 96

55 On Load Change Over Switch Four Pole 160amp., 415volts 97 1 Each 9725.17 Excess(+) Full Conversion INR

56 Supply and erection of AC Ceiling Fan 1200mm (48") suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body 3Nos of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air delivery of 218 CMM. The rated speed of the the product must be minimum of 350 revolutions per minute and 5Nos. of speeds. The product should have a manufcaturer's guarantee /warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in-charge at site. 98 36 Each 3520 Excess(+) Full Conversion INR

57 Supply and erection of LED batten 40watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.CD). The certification and Specification of the LED fitting should be as approved by O/o Advisor(Technical) , Govt. of Punjab vide Letter no. AT/2021/GL/1410-1422 Dated 06/05/2021. 99 45 Each 812 Excess(+) Full Conversion INR

58 Supply and erection of LED batten 20watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.CD). The certification and Specification of the LED fitting should be as approved by O/o Advisor(Technical) , Govt. of Punjab vide Letter no. AT/2021/GL/1410-1422 Dated 06/05/2021. 100 7 P.mtr 589 Excess(+) Full Conversion INR

59 XLPE INSULATED UN-ARMOURED CABLES (LOOSE): 101

60 Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- 102

61 Overall size 25sq.mm (3½ Core) Un-armoured (Loose) 103 40 mtr 250.21 Excess(+) Full Conversion INR

62 Overall size 35sq.mm (3½ Core) Un-armoured (Loose) 104 130 mtr 310.26 Excess(+) Full Conversion INR

63 G.I. EARTHING: 105

64 Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling). 106

65 Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8Metre in length) 107 Each 3315.89 Excess(+) Full Conversion INR

66 Fixing additional length of earthing with G.I. wire/ rope in G.I. pipe (On Surface) with sockets, elbows and MS saddle clamps including painting etc. 108

67 Additional length G.I. wire 8 S.W.G. (4mm dia.) in 15mm dia. G.I. pipe (On Surface) 109 Mtr 184.36 Excess(+) Full Conversion INR

68 COPPER EARTHING (Upto 8 metre in Length): 110

69 Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50 metre (14.76 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 8metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 3metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- 111

70 Earthing with 20mm x 3mm Copper Tape (upto 8Metre in Length) 112 1 Each 16671.95 Excess(+) Full Conversion INR

71 COPPER EARTHING STRIP (As Additional Length): 113

72 Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:- 114

73 Additional Length 20mm x 3mm thick Copper Tape 115 5 mtr 628.62 Excess(+) Full Conversion INR

74 HEAVY GAUGE WELDED CONDUIT PIPES: 116

75 Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:- 117

76 Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), White painted suspension rod for ceiling fan. 118 10 mtr 131.69 Excess(+) Full Conversion INR

77 Supply & erection of CAT 6, 24 Port Fully loaded Patch Panel, Rack Mountable for cable termination complete in all respect as desired by the engineer in charge at site. 119 1 Each 8304 Excess(+) Full Conversion INR

78 Supply & erection of 9U Wall mount 19’’ Rack with glass door,lock& key facility 400/450/500mm depth AC Fan having 10 no. mounting hardware, Cable entry/exit provision at top and bottom panels, Ventilation slots on top, bottom and side panels, Fixed side panels, Comply IS Standard of Racks complete in all respect as desired by the engineer in charge at site. 120 1 Each 8528 Excess(+) Full Conversion INR

79 SITC of 16 Port 10/100/1000 Mbps Unmanaged Data switch having IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet, Switching capacity 20 Gbps, HOL blocking prevention, 802.1p priority based, hardware queues, priority queuing and Weighted Round-Robin (WRR) Jumbo frame copper each complete in all respect as desired by the engineer in charge at site. 121 1 Each 10189 Excess(+) Full Conversion INR

80 Supply &erection of 1000VA LIT UPS/ Power Plant with SMF batteries having 30 Minutes backup time, Cold Start, 3 No. plug Indian style, Automatic Voltage Controller, Overload protection, Over charging Protection, 2 No. 12v 7Ah Batteries, Wide Input Range, Fan Less Cooling system, Transfer time less than 8ms,Audible Alarm etc.complete in all respect as desired by the engineer in charge at site. 122 1 Each 9605 Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information