REPAIRS TO SEEPAGE SUNKEN FLOOR AND TOILETS UNDER ZONE II AREA OF MCEME UNDER GE MCEME SECUNDERABAD

Demolition of Lime Concrete / Mud Phuska / PCC of any description and in any position not otherwise specifically provided for renewal including taking down Old Tarfelt and Removing debrises beyong MoD land complete all as specified and directed by Engineer-in-Charge.

M&L 40mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in padding concrete (levelling course) on roof complete all as specified and as directed by Engr-in-Charge.(Note: The rate quoted shall be included for work to be done in narrow width or conjusted area of non accessible roof upto 10M height)

M&L for Rendering 10mm thick in CM (1:3) on concrete surfaces of Roof Padding with integral water profing compound @2% by weight of cement content (water proofing compound to be paid separately) finished even and smooth without using extra cement complete all as specified and directed. (Note: The rate quoted shall be included for work to be done in narrow width or conjusted area of non accessible roof upto 10M height)

M&L for APP Based Polymeric Membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) including 10cm side over lap and 15cm end lap laid over primed surface by torching method all as specified and directed. (Note: The rate quoted shall be included for work to be done in narrow width or conjusted area of non accessible roof upto 10M height) The roof treatement shall consisting the following work :- (i) Wire brushing and cleaning top surface of tiles, cement plaster terracing or cement concrete, including flashings and junction of parapets, etc. (ii) Applying one coat of bituminous primer conforming to IS 3384 applied @ 1.7 kg/Sqm. (iii) Laying of APP based memberane as specified thickness and weight as mentioned above. (iv) Applying a coat of Solar reflective Bituminous aluminium paint @ 0.1 Kg/ Sqm over the membrane

Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing the rubbish off the premises out side MoD land complete all as specified and as directed by Engineer -in-Charge.

M&L for Coloured Non skid Ceramic Tiles 7 to 8mm thick(square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bed in cement morar 1:6 complete all as specified and as directed by Engineer -in-Charge. (Make of Tiles : Johnson, Somany, Kajaria, AGL, etc)

M&L for Non skid Ceramic Coloured Tiles 8 to10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.72 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bed in cement morar 1:6 complete all as specified and as directed by Engineer -in-Charge. (Make of Tiles : Johnson, Somany, Kajaria, AGL, etc)

M&L Glazed Ceramic Coloured Tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqmon vertical surfaces such as Skirting / Dados to wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces including 10mm thick backing coat in CM 1:4 to receive Wall Tiles all as specified and directed. (Make of Tiles : Johnson, Somany, Kajaria, AGL, etc)

Dismantling Stone slabs and tiles laid dry and pointed of any description or thickness in floors, aprons etc all as specified and as directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 15mm thick screed bed in cement morar 1:6 all as specified and directed by Engineer in charge.

Demolition of cement concrete of any description and position including removing debrises beyong MoD land complete all as specified and directed by Engineer-in-Charge.

M&L PCC 1:3:6 type C-2, 75 mm thick using 40 mm graded aggregate as Sub Base / Plinth Protection / Hardstanding and Path etc complete all as specified and directed.

M&L for 25mm thick Cement Concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in leveling / beding under floor finishes and pading concrete for roof etc all as specified and directed.

Demolition of Brick Work of any description and in any position not otherwise specifically provided for complete all as specified.

M&L for Brick Work with Fly Ash old size bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified

M&L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, kerb, coving, mud stop and filling in steel door frame etc including formed work complete all as specifed and directed. (Note: The rate quoted shall be included for work to be done in narrow width or conjusted area of non accessible roof upto 10M height)

Taking down cement plaster or cement lime plaster of any description including racking out joints and hacking for key from wall, ceiling, Chajjas and similar narrow width portion on and scrubbing down with water etc. and removing debrises beyong MoD land complete all as specified and directed by Engineer-in-Charge. (Note: The rate quoted shall be included for work to be done in narrow width or conjusted area of non accessible roof upto 10M height with all nessary Scaffolding)

M&L for Rendering 10mm thick in Brick Work / Concrete Surfaces of Walls set in CM 1:6 finished even smooth without using extra cement complete all as specified. (Note: The rate quoted shall be included for work to be done in narrow width or conjusted area of non accessible roof upto 10M height with all nessary Scaffolding)

M&L for Rendering 15mm thick on fair faces of Brick Work / Concrete Wall surface etc in CM 1:4 finished even and smooth with using water proofing compound @2% without using extra cement complete all as directed. (Note : WPC will be measured separately) (Note: The rate quoted shall be included for work to be done in narrow width or conjusted area of non accessible roof upto 10M height with all nessary Scaffolding)

M&L for Rendering 10mm thick in CM 1:3 as in Ceiling finished even and smooth without using extra cement . (Note: The rate quoted shall be included for work to be done in narrow width or conjusted area of non accessible roof upto 10M height with all nessary Scaffolding)

Supplying only Integral waterproofing compound complete all as specified and directed

Demolition of lime concrete and cement concrete coba including WC in sunken portion of toilet and bathroom, and cleaning with wire brush to remove all loose dirt, oil grease etc including removing debris outside the MD land.complete all as specified and directed

M & L for PCC 1:4:8 type D2 using 40mm using graded stone aggregate as in foundations, filling in sunken portions and mass concrete complete all as directed by Engr-in-charge.

Making holes or Cutting Existing Holes into or through Brick / Stone Wall for fixing 600 mm long 40 mm dia medium grade GI spout for draining the surplus water and for repair/replacement of WC/Bath and kitchen pipe and making good after fixing pipe in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required. All joints shall filled with mixture of cement fine sand and Shalicrete R of STP Ltd or integral water proofing chemical of Dr Fixit all as per Manufacturer's instructions. complete all as specified and directed

S&F in Repairs 110mm bore Grade B PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or fix to wall with and including necessary GI clamps and and fitting complete all as specified & directed by Engr-in-Charge. (Note - Wk to be done upto 8 to 10M height)

S&F in Repairs 75mm bore Grade B PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or fix to wall with and including necessary GI clamps and and fitting complete all as specified & directed by Engr-in-Charge. (Note - Wk to be done upto 8 to 10M height)

S&F in Repair 110mm bore PVC (SWR) bend, elbow, junction T, etc with oval access doors, complete all as specified & directed by Engr-in-Charge.

S&F in Repair 75mm bore PVC (SWR) bend, elbow, junction T, with oval access doors, complete all as specified & directed by Engr-in-Charge.

S&F in Repair for PVC (SWR) floor trap, plain with grating including jointing with solvent cement, Diameter of outlet in 75 mm, complete all as specified & directed by Engr-in-Charge.

S&F in Repair for PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement, Diameter of outlet in 75 mm, complete all as specified & directed by Engr-in-Charge.

S&F in Repairs PVC (SWR) S trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed

S&F in Repairs PVC (SWR) P trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed

S&F in Repairs Grating doom 100mm dia of Cromioum plated (Minimum weight 25gms), complete all as specified & directed by Engr-in-Charge.

S&F in repairs Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 / 110 mm dia pipe etc complete all as specified & directed by Engr-in-Charge. (Note - Work to be done upto 8 to 10M height with all nessary Scaffolding)

S&F in repairs Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm dia pipe etc complete all as specified & directed by Engr-in-Charge. (Note - Work to be done upto 8 to 10M height with all nessary Scaffolding)

M&L PCC 1:2:4, type B1 (using 12.5mm graded stone aggregated) as in packing around and junction of PVC/CI (SWR) pipe of any dia rounded or chamfered on edges etc, including finishing the external wall surface with CM 1:4 and applying exteriour paint to match with the existing surface including necessary form work, complete all as specified & directed by Engr-in-Charge. (Note - Work to be done upto 8 to 10M height with all nessary Scaffolding)

Taking up or down, 15mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge. (Note - Work to be done upto 15M height)

Taking up or down, 20mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge. (Note - Work to be done upto 15M height)

Taking up or down, 25 or 32mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.(Note - Work to be done upto 15M height)

Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings complete as specified. (Note - Work to be done upto 15M height)

Supplying and laying 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings complete as specified. (Note - Work to be done upto 15M height)

Supplying and laying 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorsincluding all fittings complete as specified. (Note - Work to be done upto 15M height)

Cutting chases ,pinning in making good to facing where required of brick/stone walls and pointed in cement mortar 1:3 for concealed water tubing etc cutting not exc 10 cm girth. complete all as specified and directed

S&F in Repair Gun Metal Globe or Gate Valves of 25 mm dia with iron wheel head screwed both ends for iron pipe Complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 20 mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified

S&F in repairs 25 mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified

S&F in repairs 32 mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified

S&F 1000 ltr capacity of rotational moulded PVC water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including float valve complete including taking down old tank all as specified and directed.

S&F in Repairs 15mm CP Bib Taps Fancy Type complete all as specified and as directed by Engineer-in-Charge.(Make -Jaquar, Hindware, Parryware)

S & F in Repairs, CP Fancy Type 15mm, Stop Valves / Angle Cock complete all as specified and as directed by Engineer-in-Charge.(Make -Jaquar, Hindware, Parryware)

S&F in Repairs 15mm Bore Fancy Type Pillar Taps, long Body / Swan Neck Complete all as specified and as directed by Engineer-in-Charge.(Make -Jaquar, Hindware, Parryware)

S&F in Repairs 15mm CP 2 Way Bib Taps Fancy Complete all as specified and as directed by Engineer-in-Charge.(Make -Jaquar, Hindware, Parryware)

S&F in Repairs 15mm dia CP Health faucet with 1.25 Metre long flexible tube and CP Wall hook including making connections and fixed in position etc Complete all as specified and as directed by Engineer-in-Charge.(Make -Jaguar, Hindware, Parryware, Kohler, etc)

S&F in Repairs 15mm dia CP Wall Mixer Fancy Type complete all as specified and as directed by Engineer-in-Charge.(Make -Jaguar, Hindware, Parryware, Kohler, etc)

S&F in Repairs 15mm Bore Fancy Type CP Pillar Hot & Cold Mixer, long Body / Swan Neck Complete all as specified and as directed by Engineer-in-Charge.(Make -Jaguar, Hindware, Parryware, Kohler, etc)

S&F in Repairs CP Shower Rose 125mm size with swivel joint along with Shower Arm Complete all as specified and as directed by Engineer-in-Charge.(Make -Jaguar, Hindware, Parryware, Kohler, etc)

S&F in Repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden / plastic cleats (Minimum weight 300gms) complete all as specified

S&F in Repairs Shelf of Glass fixed with and including Chromium plated brass screws and wooden / plastic cleats (Minimum weight 300gms) complete all as specified

S&F in Repairs CP Soap Dish Holder fixed with and including Chromium plated brass screws and wooden / plastic cleats complete all as specified

S&F in Repairs CP Towell Raill of 600mm long fixed with and including Chromium plated brass screws and wooden / plastic cleats complete all as specified

S & F in Repairs, EWC, White Colour, Intigrated One Piece including "P" or "S" trap with necessary fixing arrangement including Seat Cover Complete all as Specified and directed by Engineer-in-Charge and approved by GE. (Make -Jaguar, Hindware, Parryware)

S&F in Repairs, Vitreous China Squatting Pan, 'Orissa' Pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications as specified and directed. (Make-Jaquar, Hindware, Parryware.)

S&F in Repairs, Vitreous China Wash Hand Basin with Full Pedestal White flat back size 530x410x 205mm including cutting and all necessary fittings for and pinning in ends of brackets or erecting stand etc including Fancy type CP Pillar Tap, Waste Coupling CP brass 32mm dia with long screwed shanks & fly nuts & PVC Waste Pipe complete all as apecified (Make-Jaquar, Hindware, Parryware.)

S&F in Repair Vitreous China Urinal Half Stall Type, Flat Back, size of 465 x 355 x 265 mm, White (minimum), with grating and union for discharge pipe (including flushing cistern, flush pipe and waste pipe), complete all as specified and as directed by Engineer-in-Charge. (Make-Jaquar, Hindware, Parryware.)

S&F in Repairs,10 litre capacity, low level PVC flushing cistern, syphonic action type white colour with in let ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed by Engr-in-charge

S&F 15 mm dia 600 mm long PVC water connection with PTMT nuts and washers all as specified

S&F in Repair 40mm dia PVC waste pipe for Urinal etc complete all as specified and as directed by Engr-in-Charge.

S&F in Repairs 32mm bore for Low Density Polythelyne Pipes (LDPE) as in outlet pipe for WHB / Sink complete all as specified

Taking down chowkhats or frames with shutter without taking taking off shutters from the frames not exc. 1.5 sqm complete all as specified and directed

Taking down chowkhats of frames with shutter without taking taking off shutters from the frames n. exc 1.5 sqm but not exc. 4 sqm complete all as specified and directed

Taking down Shutters and Resecuring or easing & adjusting, and fixing the same opening of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed

Taking down Shutters exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed

S&F Solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube fixing in opening as per specification and drawing.complete all as specified and directed

S&F Factory Made Solid Panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engr-in-Charge.

S&F 100mm Long Mild Steel Butt Hinges, Medium Weight.complete all as specified and directed

S&F 100mm long SS Butt Hinges, Medium Weight.complete all as specified and directed

S&F 150mm long SS Tower Bolts.complete all as specified and directed

S&F 150mm long SS Handles.complete all as specified and directed

S&F 250 mm long SS Sliding Door Bolt with hasp, staple (bolt type) and fix clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast.complete all as specified and directed

S&F in Repairs aluminium powder coated glazed fixed type ventilator made out from anodised aluminium frame section weighing not less than 0.50kg/RM with fixed glass 4mm thick and SS wire cloth including glazing cleats /clip, rubber packing and aluminium snap beading etc. The ventilator shall be in two parts, in first parts stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with MS screw & bolts and in second part ventilator fixed and flip type using pin headed glass with aluminium section 20558,14019 (Jindal) with rubber gasket beading and locking arrangement etc complete all as specified and as directed. (Note:- 4mm thick Sheet Glass / 0.36mm thick SS Wire Mesh shall be included in the unit rate quoted).

Please Enable Macros to View BoQ information