REPAIR OF GI CHARPOY AND REPAIR AND REPAINTING TO STEEL FURNITURE AND REPAIR/RECANING /POLISHING TO CERTAIN WOODEN FURNITURE OF OMQ, SMQ AND OTM ACCN AT AF STN MUMBAI AND AF STATION MADH UNDER GE AF THANE

Amount

Removal of following existing unserviceable components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components / discorded components as mentioned including tightening the joints, placing every part in-tact and painting / polishing the disturbed portion, as applicable as per drgs. (B) Work will be executed where the furniture exist in different User Units of GE(AF) Thane including BSO's Furniture Yard as directed by Engineer-in-Charge 1. Almirah Large Steel, Almirah Small Steel & Almirah Med Steel FD-1031/67(M)/1032

a) Removing old U/S 6 Liver Lock with S & F new 6 Liver Lock with Duplicate Key as shown in drg.

b) Removing old U/S handle with S & F new handle 150mm long as shown in drg.

c) Removing old U/S hings with S & F new hings as shown in drg

d) Removing old U/S Leg with S & F new Leg of Almirah Large Steel as shown in drg

e) Removing old U/S Leg with S & F new Leg of Almirah Small Steel as shown in drg

f) Removing of U/S shelves of Almirah Large Steel and supply and fix new shelves of Almirah Large Steel all as shown in drg.

g) Removing of U/S shelves of Almirah Small Steel and supply and fix new shelves of Almirah Small Steel all as shown in drg.

h) Removing old U/S Locking assembly with iron plate & 02 rods 10mm & lock cover & S/F new locking assembly set complete of Almirah Large Steel as per drg.

j) Removing old U/S Locking assembly with iron plate & 02 rods 10mm & lock cover & S/F new locking assembly set complete of Almirah Small Steel as per drg.

2. Locker BED Side Steel FD-1029

a)Removing of U/S Hasp & Staple with S&F New Hasp and Staple as per drg

b)Removing of U/S Handle with S&F New Handle as per drg

c) Removing of U/S Leg with S&F New Leg as per drg

d) Removing of U/S shelf with S&F new shelf as per drg

3.Table 3'x2' with Drawer Steel FD-1008

a) Top with 18/19mm prelaminated MDF board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

(b) Removing of U/S Rubber Shoe and Supply and fix new rubber shoe as per drg

(c) Removing of U/S Drawer and Supply and fix new Drawer as per drg

4. Chair writinng MAP/chair steel with Arms and coushioh seat and Back/ Chair visitor FD/E6/MAP/12/TP

(a) Removing U/S Upholstry of seat and S&F new best quality upholstry of seat duly of stiched as per exsiting upholstry of chair and drg

(b) Removing U/S Upholstry of back and S&F new best quality upholstry of back duly of stiched as per exsiting upholstry of chair and drg

c) Removing U/S Handle and S&F New Handle as per drg

5. Chair Computer/ Revolving /Excutive low back/high back with Arms/w/o Arms Fd/E6/MAP/01/TP

(a) Removing U/S star Base and S&F New star base as per drg

(b) Removing U/S castor wheel and S&F New castor wheel as per drg

(c) Removing U/S hydrolic gas pump and S&F new hydrolic gas pump as per drg

d) Removing U/S handle and S&F new handle as per drg

e) Removing old U/S upholstry of seat with S & F new good quality of upholstry of seat matching with existing as shown in drg

f) Removing old U/S upholstry of Back with S & F new good quality of upholstry of Back matching with existing as shown in drg

6. Chair verandah FD-359/256

(a) Removing U/S canning of seat of chair verancah and recanning of seat of chair verandah with new cane as per drg.

(b) Removing U/S canning of back of chair verancah and recanning of back of chair verandah with new can as per drg

(c) Removing of U/S Rubber shoe and supply and fix new rubber shoe as per drg.

7. Table Office Officer Steel FD-1003, 84(M)

(a) M&L removing U/S old top of table and supply and fix new top made up of 18mm thick prelaminated MDF board exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, ISI marked of approved shade and make with 4mm thick teak wood beading all around, all as specified and directed..(size of top 1.68 mtr x 0.87 mtr)

(b) M&L for removing old U/S box of set of three drawer of existing size and supply and fix new box of set of three drawers of existing size all as specified and directed.

(c) M&L for removing old U/S lock from Office table and supply and fix new locks with duplicate keys and making all drawers functional and locking as per standard pattern all as specified and directed.

(d) M&L for repair to Table office Officer by necessary denting to deshaped portions and greasing to drawers.

(e) M&L for cleaning the steel surface of table office officer by scraping with emery paper filling holes wherever required & shall be spray painted both internally & externally with two coats of synthetic enamel paint of approved shade.

(f) Removing of U/S Rubber Shoe and Supply and fix new rubber shoe as per drg

8. Table Office Clk Steel & Table Typist Steel FD-1004, 84(M)

(a) M&L removing U/S old top of table and supply and fix new top made up of 18mm thick prelaminated MDF board exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, ISI marked of approved shade and make with 4mm thick teak wood beading all around, all as specified and directed. (size of top 1.2 mtr x 0.61 mtr)

(b) M&L for removing old U/S box of set of three drawers of existing size and supply and fix new box of set of three drawer of existing size along with central locking all as specified and directed.

(c) M&L for denting to deshaped portions of Table Clerk and greasing to drawers.

(d) M&L for cleaning the steel surface of table office clerk by scraping with emery paper filling holes wherever required & shall be spray painted both internally & externally with two coats of synthetic enamel paint of approved shade.

(f) Removing of U/S Rubber Shoe and Supply and fix new rubber shoe as per drg

9. Tepoy Verandah FD-255

a) Top with 18/19mm prelaminated MDF board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Removing of U/S Rubber Shoe with S&F New Rubber Shoe as per drg

10. Chair CB Steel With Arms FD-75(M)

a) Removing old U/S Seat of Chair CB Steel with Arms & Supply and Fix new seat frame including cane work as per drg

b) Removing old U/S Back of Chair CB Steel with Arms & Supply and Fix new back frame including cane workas per drg

c) Removing of damage MS flat cleat 25x3 mm for Chair CB Steel with and without Arms and S & F new MS flat cleat 25x3mm duly welded and painted with black paint as per drg

d) Removing old U/S old Handle of Chair CB Steel with S&F new handle as per drg

e) Removing old U/S Cap with S & F new cap as per drg

(f) M&L for cleaning the steel surface of chair CBA with arms by scraping with emery papers filling the holes where ever required and shall be painted externally with two coat of synthetic enamel paint of approved shade and make.

11. Charpoy GI Pipe Ply top (FD-220 ) ,

a) Removing of the existingh U/S long rail and Supply & Fixing new long rail with 32mm dia GI Pipe including both end threaded suitable for fixing elbow complete all as shown in drg as specified and directed.

b) Removing U/S broken short rail and fixing new short rail made out of old broken long rail obtained from 4 (a) above including both end threaded suitable for fixing elbow complete all as shown in drg as specified and directed.

c) Removing U/S broken Leg and fixing new leg made out of old broken long/short rail obtained from relevent item of Sch A above including both end threaded suitable for fixing elbow complete all as shown in drg as specified and directed.

d) Removing of U/S Elbow 3 way and supply and fix new GI Elbow 32mm dia ISI marked.all as shown in drg as specified and directed.

e) Removing of U/S Check nut and supply and fix new check nut all as shown in drg as specified and directed.

f) Removing old unserviceable plywood from GI pipe & supplying and fixing 12mm thick plywood boiling water proof IS ; 710 of size 1980 x 900mm to GI pipe frame by privifing 03 Nos of black painted flat Iron of size 40mm x 6mm length equal to width of GI Charpoy bending the flat iron the shape reqd to fix it tightly to GI Charpoy with the help of nut, bolt & washer of size 62-65mm & 6mm dia by drilling holes into GI pipe alongwith any welding if required . The plywood shall be fixed on the charpoy by drilling 16 Nos holes (03 nos each long Rail & 02 Nos on each iron flat ) & fixing it with nut bolt and washer of size 62-65mm and 6mm dia & tightening the complete frame , Rest all as directed by Engr - In charge .( Ply wood Make-Green Ply/Kit ply/Century/Archidply

12. Charpoy MS iron with hard top FD/E6/MAP-II/01

(a) M & L Plywood top 12mm thick BWR grade confirming to IS -303 ISI marked and fixing charpoy MS ironwithplywood top as shown on drg no FD/E6/MAP-II/01 including takingout unseviceable ply wood top,complete al as specified andand directed.

(b) M & L middle stiffner made out from mild steel square tube/pipe 25 x 25mm of 1.6mm wall thick ness,adjustaing existing 2 nos stiffeners and fixing to charpoy MS Tubing with plywood top and fixing as shown on drg, applying two coat systhetic enamel black paint (as approved) by spary painting machine over a coat of red oxide primer .complete all as specified and as directed.

13 .Table Computer Godrej FD/E6 MAP

(a) M & L Top of Table computer of prelaminate particle board 18/19MM thick ,exterior grade ISI marked (Make - green ply/century/Archied). Providing teak wood 5.0mm thick all round applying french polish upto the desired fininsh on beading a shown on drawing including taking out unseviceable top and fixing new top complete all as specified and as directed.

(b) M & L drawer made out of Prelaminated MDF board 18/19MM thick exterior grade ISI Marked ( Make- Green ply/Century/Archied) and fixing new drawer to table computer as shown on drawing, including taking out unserviceable drawer complete all as specified and as directed.

( c) M & L Lock (Make - Godrej) of table computer and fixing new lock as shown on drawing including out unserviceable lock complete all as specified and as directed.

(d) M & L Handle of table computer and fixing new handle as shown on drawing including out unserviceable handle complete all as specified and as directed.

(e ) S & F hard Rubber shoe superior quality ( as approved by engineer -in -charge ) fixing the leg of Table Computer as shown on drawing including taking out unserviceable shoe complete all as specified and as directed .

14 . Table Dining Ors FD-165(M)

(a) M & L TOP of table dining Ors of thick board 18/19mm Mm thick with 22 gauge aluminium sheet (Make- Green Ply /century) shown on drg No FD- 165(M) including taking out unserviceable TOP, complete all as specified and as directed .

(b) M & L Mild steel square pipe of size 20MM,1.6MM thick as leg having length from 300MM to 500 MM and fixing/welded to table dining Ors as shown on drawing No FD- 165 (M) , applying two coats of (black ) syntheick enamel paint (as approved ) by spary painting machine over a coat of red oxide primer including taking out unserviceable leg, complete all as specified and as directed.

(c ) M & L Mild steel square/round pipe of size 25MM,1.6MM thick as side stiffener and fixing/welded to table dining Ors as shown on drawing No Fd- 165 (M) , applying two coats of (black ) synthetick enamel paint (as approved ) by spary painting machine over a coat of red oxide primer including taking out unservicealbe long rail,, complete all as specified and as directed.

(d ) M & L Mild steel square/round pipe of size 25MM,1.6MM thick as short rail and fixing/welded to table dining Ors as shown on drawing No FD- 165 (M) , applying two coats of (black ) syntheick enamel paint (as approved ) by spary painting machine over a coat of red oxide primer including taking out unservicealbe short rail,, complete all as specified and as directed.

(e) M & L Mild steel square/round pipe of size 25MM,1.6MM thick as centeral stiffener and fixing /welded to table dining Ors as shown on drawing No FD- 165 (M) , applying two coats of (black ) syntheick enamel paint (as approved ) by spary painting machine over a coat of red oxide primer including taking out unservicealbe centeral stiffener, complete all as specified and as directed.

(f ) M & L complete removing /scarping old worn out paint from table dining ORs ( drawing No FD- 165 (M)) by sand paper/ scrapper and applying to coats of syntheick enamelled paint (as approved ) by spary painting machine over a coat of red oxide zinc chrome prime, complete all as specified and as directed.

15. Bed hard steel (MAP) (FD/E6/MAP/08R)

(a) M & L removing old broken/ unservicable Prelaminated particle board of head board of bed hard and S & F new 18mm thick plywood size 634mm x 196mm BWR Grade as per IS - 303 approved specification Make Archid ply/Century/Green Ply covered both sides with laminate sheet of approved shade by Engr-in -charge with 18mm x 4mm thick teak wood beading all round the edges of ply complete rest all as specified and shown on drg an directed by Engr -in - charge.

b) M & L removing old broken/ unservicable Prelaminated particle board of foot board of bed hard and S & F new 18mm thick plywood size 638mm x 314mm BWR Grade as per IS 303 approved specification Make Archid ply/Century/Green Ply covered both side with laminate sheet of approved shade by Engr-in -charge with 18mm x 4mm thick teak wood beading all round the edges of ply complete rest all as specified and shown on drg an directed by Engr -in - charge.

c) M & L removing olf broken/unserviceable Ply top of Bed hard steel and S & F new ply top of 12mm thick of size 1974mm x 850mm BWR Grade as per IS 303 approved specification of Make: Archidply/Century Ply/Green Ply with fixing in position all as shown on drg with suitable size screws & cup washercomplete all as specified and shown on drg and directed by Engr - in - charge.

d) M & L for preparation of old steel surface of bed hard by scraping /rusting /denting and applying 2 coats of synthetic enamel paint colour black in shade of Make : Berger/Nerolac/Asian with spray gun machine complete as directed by engr- in - charge.

16. Chair CB Steel without Arms FD- 75 (M)

(a) M&L for removing old U/S seat made up of 1st class teak wood from chair CBB steel without arms and supply and fix new seat to chair as per drg all as specified & directed

(b) M&L for removing old U/S back made up of 1st class teak wood from chair CBB without arms and supply and fix new back to chair as per drg all as specified & directed

(c ) M&L for cleaning the steel surface of chair CBA without arms by scraping with emery papers filling the holes where ever required and shall be painted externally with two coat of synthetic enamel paint of approved shade and make.

17. M&L for spot welding of broken joints etc. Various steel furniture not exceeding 2.5cm in length including scraping, preparing surace of welded portion by grinding and buffing to make fit for painting and applying one coats of synthetic enamel paint over a coat of red oxide primer on welded portion to match with existing painting. FD-67,1031,1032, 106(M), 1038, 85,106, 129(M), 1038,,75(M), 84(M), 1003,1004,75,258,77(M), 1029, 257, 255, 208, FD/E6/MAP/02(R), FD/E6/MAP/05, FD-165(M), 1007, 1008, 1009,77, 1027, 90(M), 1028

18. Repainting of old painted surfaces of the following steel furniture and touching with red oxide primer where necessary prepairing surfaces and painting one coat SE paint/ powder coated paint as where required as per drg.

a).Almirah Large Steel FD-1031/67(M)

b) Almirah Small/Medium Steel FD-1032/67(M)

c) Locker Bed Side Steel FD-1029

g) Table 3'x2' with Drawer Steel FD-1008

h) Chair verandah FD-359/256

j) Teapoy Verandah FD-255

19. Table 3'X2' or 900X600mm with / without Drawer : FD-55/284/224/ 41(M) /283

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Legs as per drg

c) Long rail as per drg

d) Short rail as per drg

e) Long Stiffener as per drg

f) Short stiffener as per drg

g) Drawer as per drg

h) Knob as per drg

20. Table Dining 6 Persons : FD-273, 30

(a) Top made up of 18mm thick prelaminated MDF board exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, ISI marked of approved shade and make with 6mm thick teak wood beading all around, all as specified and directed.

(b) Legs

(c) Top rail

(d) Stiffener

21. Table Dining 8 Persons : FD-273, 30

(a) Top made up of 18mm thick prelaminated MDF board exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, ISI marked of approved shade and make with 6mm thick teak wood beading all around, all as specified and directed.

(b) Legs

(c) Top rail

(d) Stiffener

22. Table Writing FD-275

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Legs as per drg

c) Foot rest as per drg

d) Stiffener as per drg

e) Sides of cabinet with 18mm thick ply wood with 1.5mm thick lamination as per drg

f) Short Rail as per drg

g) Front/Long Rail as per drg

h) Drawer as per Drg

j) Anodized Aluminium Knob as per drg

k) Cabinet Door with locking system

23. Peg Table : FD-384/277/236

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Legs as per drg

c) Short rail as per drg

d) Long rail as per drg

24. Table Bed Side / table bed side MAP FD-276/248 , FD/E6/MAP/15

(a) M&L removing U/S old top/ sides of table bed side and supply and fix new top/side made out of 18 mm thick decorative pre-laminated MDF board exterior grade of approved shade and make with 6 mm TW beading all around (size of top 450x450mm) rest all as specified & directed).

(b) M&L removing U/S old back of table bed side and supply and fix new back of exisitng size made out of 12 mm thick BWR Grade plywood

(c) M&L for removing old U/S Knob from drawers of table bedside and supply and fix new decorative CP handle 75mmof approved design and make. rest all as specified and directed.

(d) M&L for removing U/S 18mm MS Square pipe and S&F new MS pipe duly powder coated in Chocobrown colour and fixing necessary PVC shoe

25. Table Centre : FD-274 / 235/29

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Legs as per drg

c) Front/Rear Rail as per drg

d) Side Rail as per drg

26. Teapoy : FD-278, 232, 382, 343(M)

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Front Rail as per drg

c) Legs as per drg

d) Side Rail as per Drg

e) Stiffner as per Drg

27. Bed Plywood Top / Hard Bed : FD-246/ 247

a) Long rail as per drg

b) Short rail as per drg

c) Stiffeners as per drg

d) Removing old U/S/ old plytop with 12mm thick BWR (IS-303) marked plywood as per drg. Make-Greenply, Kitply (Vista), Century, Archidply

e) Foot board as per drg

f) Head board as per drg

28. Chair Dinning FD-69/228/279

a)Canning as per drg

b) Front Leg as per drg

c) Back/Rear Leg as per drg

d) Leg Stiffner as per drg

e) Front/Rear/side Rail as per drg

f) Back Stiffner as per drg

29. Chair Writing FD-280 /250/20

a)Canning as per drg

b) Front Leg as per drg

c) Back/Rear Leg as per drg

d) Leg Stiffner as per drg

e) Front/Rear/side Rail as per drg

f) Back Stiffner as per drg

g) Armrest as per drg

30.Chair Easy FD-229/17

a)Canning including seat and back as per drg

b) Front Leg as per drg

c) Back/Rear Leg as per drg

d) Front/Rear Rail of seat frame as per drg

e) All types of rail of back frame as per drg

f) Side Rail of seat frame as per drg

g) Armrest as per drg

31. Sofa set Single/ two /Three/ four/ five seater with Arms FD-281/258/373/MAP PH-II/02

(a) Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new coushion cover made out of approved tapestry cloth not less than Rs 500/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.

(b) Replacement of U/SFront/Rear Leg as per Drg

(c) Replacement of U/S Batten of seat and back as per Drg

(d) Replacement of U/S Arms as per Drg

(e) Replacement of U/S front/rear/side rail of single seater of as per Drg

(f) Replacement of U/S front/rear rail of 3 seater of as per Drg

(g) Taking out old Unserviceable Cushion and Supply & Fix new cushion make Sleepwell/ Kurlon or Equivalent 40 density rest all as specified andshown on respective drgs.

(h) Replacement of U/S side rail of 3 seater of as per Drg

32. Chair Dining with cushion FD/E6/MAP/10

(a) Replacement of Front leg as per drg

(b) Replacement of Rear leg as per drg

(c) Replacement of Stifner as per drg

(d) Replacement of front/rear/side Rail as per drg

(e) Replacement of seat including Tapestry cloth cushion and ply as per drg

(f) Replacement of Rear verticle strips as per drg

33. Table Dining 1200X900MM : FD-273, 30

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Triangular wooden bracket 100X100X20mm thick

c) Legs as per drg

d) Long Rail as per drg

e) Short Rail as per drg

34. Table dressing Gents FD-379

a) Mirror as per drg, Make-Modiguard, Atul

b) Drawer as per drg

(c) Back ply as per drg

d) Knobs as per drg

35. Table dressing Ladies FD-378

a) Mirror as per drg, Make-Modiguard, Atul

b) Drawer as per drg

(c) Back ply as per drg

d) Knobs as per drg

(e) sliding glass with channel as per drg

36. Dressing Mirror Gents (MAP) FD/E6/MAP/16

a) Mirror as per drg, Make-Modiguard, Atul

(b) Back ply as per drg

c) Maganatic catcher as per drg

(d) Hinges as per drg

(e) Glass shelves with mtg arrengement as per drg

(f) wall mounting arrangement as per drg

37. Bin linen multipurpose : FD/E6/MAP/09

a) Back ply as per drg

b) Door shutter as per drg

c) Drawer as per drg

d) Top with 18/19mm thick ply wood with 1.5mm thick lamination of approved shade with TW beeding as per drg

e) Leg as per drg

f) CP knob as per drg

38. Chair wooden bottom :-

a) Top with 6mm thick ply wood as per drg

b) Front Leg as per drg

c) Back/Rear Leg as per drg

d) Leg Stiffner as per drg

e) Front/Rear/side Rail as per drg

f) Back Stiffner as per drg

39. Side Board : FD-241/371/26(M)

a) Back ply as per drg

b) Door shutter as per drg

c) Drawer as per drg

d) Top with 18/19mm thick ply wood with 1.5mm thick lamination of approved shade with TW beeding as per drg

e) Leg as per drg

f) CP knob as per drg

40 Repair to unique sofa set 5 seater FD-TP: Reapair/replacement of tepestry cloth /cushioning material/legs wherever required and spring of unique sofa set 5 seater. Colour shade and quality of cloth not less than Rs 600/- per mtr and melamine polish as per samle and directed by Enger-in-charge.

41 . M&L for french polishing of two coat to the following furniture articles all are of MES pattern viz F/DB/FD series or Similar items incl applying wax for depressed surface before polishing all as specified and shown on drgs and shade as applicable or as directed directed by Engineer-in-Charge.

(a) Table 900x600mm with/without Drawer FD-88/224 /231/291 /284 / 283/41(M)

(b)Table dining 6/8 pers/Table 1520x860x760mm FD-239 /273

( c)Table wrtiting FD-275

(d). Peg table FD-384/277/236

(e) Table bed side FD-248/ 276

(f) Table centre FD-235/274/29

(g) Teapoy FD-278, 232, 382, 343(M)

(h) Bed Plywood Top FD-246/247

(j) Chair Dinning FD-69/22/279

(k). Chair Writing FD-280 /250/20

(l) Table dining 1200x900 mm FD-273,

(m) Table dressing Gents FD-379 232, 382, 343(M)

(n) Table dressing ladies FD-378

(o)Dressing Mirror MAP FD/E6/MAP/16

42 . M&L for Melamine polishing of two coat to the following furniture articles all are of MES pattern viz F/DB/FD series or Similar items incl applying wax for depressed surface before polishing all as specified and shown on drgs and shade as applicable or as directed by Engineer-in-Charge.

(a) Table dining 6/8 pers FD-239 /273

(b) Table wrtiting FD-275

( c). Peg table FD-384/277/236

(d) Table centre FD-235/274/29

(e) Teapoy FD-278, 232, 382, 343(M)

(f) Bed Plywood Top FD-246/247

(g) Chair dining long back FD/E6/MAP/10

(h) Chair Writing FD-280 /250/20

(j) Chair easy FD-229/17

(k) Sofa set 3 seater FD-281/258

(l) Sofa Set single seater FD-281/258

(m) Sofa set 5 seater FD-281/258

(n) Table dressing Gents FD-379 232, 382, 343(M)

(o) Table dressing ladies FD-378

(p)Dressing Mirror MAP FD/E6/MAP/16

q) Side board FD-241/371/26(M)

r) Bin linen Multipurpose FD/E6/MAP/09

S) sofa set 4 Seater FD-281/258

Mahesh Traders

SARGAM ENTERPRISES

M/s SK Construction

GAJANAN SALES CORPORATION

M/s. Deepak Traders

dimalsonsdecorator

M/s Qureshi Construction Co