CONSTRUCTION OF TOILET BLOCKS FOR OFFICERS NEAR CENTRAL LECTURE POST OF COMMANDO TRAINING AREA, HQ JUNIOR LEADERS WING, THE INFANTRY SCHOOL ,BELAGAVI ,REPLACEMENT OF ACC SHEET IN BLDG NO 2 ARMOUR SHOP,MISC STORE, WASHER MAN SHOP ,TLR SHOP,PRECISION

Amount

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation and getting out in hard/dense soil complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D2, (Using 40 mm graded stone aggregate ) as in foundation filling and mass concrete etc complete all as specified and as directed.

Material and labour for Moorum/red bajri filling in floors or paving, laid in layers n exc 15cm thick, spread levelled and rammed including watering and consolidation complete all as specified and as directed.

Returning filling in excavated soil including spreading, leveling Watering and well ramming in layers n.exc 25cm complete all as specified and as directed.

Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point completeall as specified and as directed .

Material and labour for PCC 1:2:4 type B0, (Using 12.50mm graded stone aggregate ) 25 mm thick as in damp proof course using water proofing compound including necessary steel form work complete all as specified and as directed.Note :Water proofing compound will be measured and paid seperately under relevent item in this BOQ

Material and labour for hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfaces complete all as specified and as directed.

Material and labour for Plain, cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) 75 mm thick as sub base to floors etc including necessary steel form work complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B1, (Using 20 mm graded stone aggregate ) 25 mm thick as sub base to floors etc including necessary steel form work complete all as specified and as directed.

Material and labour for Premium quality Non skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match shade with joint free non skid tiles, over screed bed 15mm thick in cement mortar 1:6 complete all as specified and as directed.Note :Make of ceramic tile ; Johnson/Kajaria/Naveen

Material and labour for Premium quality glazed ceramic coloured tiles of size 350x250x7mm/450x350x7mm in dado & skirting , set and jointed in neat cement slurry and pointed in white or colored cement to match including 10 mm thick rendering with rough finished in cement mortar 1:4 to received tile . etc complete all as specified and as directed.Note : Make of Ceramic Tile :HR Johnson/Khajaria/Naveen

Supply and fix Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed

Supply and fix Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and as directed

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45 mm thick(TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in roof covering completec all as specified and as directed.Note:Make of Galvalume sheet:Tata Blue scope Ltd/JSW (Colouron+)/Llyod

Supply and fix Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.45mm thick (TFT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, valley gutter fixed with self tapping screws and washers completec all as specified and as directed..Note:Make of Galvalume sheet:Tata Blue scope Ltd/JSW(Colouron+)/Llyod

Supply and fix Rolled mild steel angle section for roof trussses(framed),trussed and purlins ,rafters,struts (beam,tee,angle ,channel, or flat sections ) including distance pieces, cleats etc confirming to Gde Fe 410-W (Gde-E-250 quality - A) complete all as specified and as directed.

Supply and fix Mild Steel work as in hold fast , wind ties for roof including securing bolts and cutting tops to shape etc. conforming to Fe-290 Gde E-165 complete all as specified and as directed

Material and labour for Preparation of new steel surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for Precast cement concrete block masonry with solid block type C1 1:3:6 (using20mm graded stone aggregate), exc 10 cm in width in set in cement mortar CM 1:6 complete all as specified and as directed.

Supply and fix Mild steel TMT bars of FE 500 or FE 550 D 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed

Description all as per item No 22 here in before but 5 to 10 mm dia as in stirrups/spacers/binders etc

Material and labour for Reinforced cement concrete M-25 grade using 20mm graded stone aggregate (Design Mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and as directed.

Material and labour for Reinforced cement concrete M-25 grade using 20mm graded stone aggregate (Design Mix) as in Columns, pillars, piers, posts and struts etc complete all as specified and as directed.

Material and labour for Reinforced cement concrete M-25 grade using 20mm graded stone aggregate (Design Mix) as in beams, cantilevers, lintels over 1.5 m in span or similar items etc complete all as specified and as directed.

Material and labour for Reinforced cement concrete M-25 grade using 20mm graded stone aggregate (Design Mix) as in chajja and similar items complete all as specified and as directed.

Material and labour for use of steel Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, and similar works for rough finished flat concrete surfaces complete all as specified and as directed.

Material and labour for use of steel form work to sides and soffits of roof beam, tie beam, lintel, and similar works for rough finished flat concrete surfaces complete all as specified and as directed.

Material and labour for use of steel Formwork to sides of pillars, posts, struts, piers, columns and stanchions, and similar works for rough finished flat concrete surfaces , vetical or to battercomplete all as specified and as directed.

Material and labour for use of steel Formwork to side and soffits of chajja and similar works including edges for rough finished flat concrete surfaces complete all as specified and as directed.

Material and labour for 10 mm thick rendering on fair faces of PCC Block masonry or concrete surfaces in CM 1:6 surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

Material and labour for 15 mm thick Rendering on fair faces of brick work or concrete surfaces in CM 1:4 surface finished even and smooth without using extra cement with water proofing compound complete all as specified and as directed.

Supply only water proofing compound . Make :Impermo/Roff/Cico

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistent primer complete all as specified and as directed.

Material and labour for Solid PVC Door Frame of Size 50mm x 47mm out of 5mm plain colour PVC sheet on both sides reinforced with M.S Square tube, supplying and fixing in opening as per sepcification and drawing . complete all as specified and as directed.

Supply and fix 30mm thick Factory made PVC moulded door shutter as IS-4020 made from MS tube of top and bottom rods.MS frame shall be covered with heat moulded plain colour PVC "c" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,lock rail and bottom rail on plain side and as gap insert for top and bottom rail. Pannelling of plain colour PVC sheet to be fitted in MS frame welded /sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and drawings complete all as specified and as directed.

Supply and fix Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.18 mm fixed with tinned tack or galvanised wire staples complete all as specified and as directed.

Supply and fix Stainless steel butt hinges medium weight 100mm size complete all as per specified and as directed.(ISI MARKED)

Supply and fix 150 mm long extruded section aluminium alloy anodised handle fabricated type complete all as specified and as directed.Make:Crown/Classic/Adarsh

Supply and fix 150 mm long Aluminium anodised, barrel tower bolt of extruded section complete all as specified and as directed.Make:Crown/Classic/Adarsh

Supply and fix 300mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate type with bright bolt not less than 12mm dia complete all as specified and as directed. Make:Crown/Classic/Adarsh

Material and labour for 1000 litres capacity Rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes and 25 mm dia PTMT ball valves high pressure (minimum weight 210 grams) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe ,hoisted, fixed in position and testingcomplete all as specified and as directed.Note:MAKE: Sintex/Infra/Polycon

Material and labour for PCC 1:3:6 ,type C2( using 40mm graded stone aggregate) 75mm thick as in plinth protection and finishing the cement concrete surface even and smooth without using extra cement including necessary steel form work complete all as specified and as directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed. Note : Make of Glass : saint gobain/Modi guard/Gold fish

Supply and fix Vitreous china water closet, Pedestal type, white, including PVC flush pipe, seat cover etc and connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipes etc. complete all as specified and as directed.

Supply and fix Health faucet (ABS body), mild steel chromium plated with 15 mm dia pipe with 1.00 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. Make : Essco by Jaquar Cat No: ALE-CHR-593 or equivalent in Kohler/Hindware

Supply and fix 15 mm bore 2 way Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed. Make: Essco by Jaquar Cat No: STE-107041 or equivalent in Kohler/Hindware

Material and labour for PVC (SWR) nahani/floor trap plain with grating of 75mm dia outlet including jointing with solvent cement complete all as specified and as directed.. ..Note :Make :Finolex/Supreme/Prince

Supply and fix PVC square or round shaped grating of 150mmSizeof PTMT (Minimum weight :100 gms) complete all as specified and as directed. Make :Prayag/M/S Shakthi Industries

Supply and fix PVC (SWR) gully trap S/P/Q of size 125/110 mm bore setting and jointing with solvent cement complete all as specified and as directed...Note :Make :Finolex/Supreme/Prince

Supply and fix 110 mm dia PVC (SWR) vent cowl complete all as specified and directed..Note :Make :Finolex/Supreme/Prince

Supply and fix PVC connections 15 mm size with PTMT nuts 600mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Supply and fix in repairs Vitreous china wash basin,white,size 550x400mm,including CI brackets , with PVC waste pipe and waste fittings and PVC connection of 600 mm long and cutting for and pinning in ends of brackets or erecting stands etc complete all as specified and as directed.

Supply and fix tubular towel rail 600mm long of PTMT fixed with and including CP brass screws and wooden/ plastic cleats( minimum weight : 170gm) complete all as specified and as directed. Make :Prayag/M/S Shakthi Industries

Supply and fix in repairs Syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle including brackets and connections to pipe ,PVC flush pipe 32mm dia for low level cistern etc .complete all as specified and as directed.

Supply and fix Unplasticised PVC pipes of 20 mm dia., pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.Note :Make of UPVC Pipe :Finolex/Supreme/Prince

Supply and fix Unplasticised PVC pipes of 25mm dia., pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.Note :Make of UPVC Pipe :Finolex/Supreme/Prince

Supply and fix Unplasticised PVC pipes of 15mm dia., pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.Note :Make of UPVC Pipe :Finolex/Supreme/Prince

Supply and fix in repairs 15mm bore Stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and as directed.Make :Prayag/CERA/JOHNSON

Supply and fix 25 mm bore dia gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed.Make : Leader/Kirloskar/Kartar

Supply and fix Pillar tap 15 mm dia cast copper alloy, chromium plated, screwed down high pressure for iron pipe or for brass ferrule etc complete all as specified and as directed . Make: Prayag / CERA/Johnson

Supply and fix15 mm bore Bib tap brass chromium plated with crutch or butter-fly handle, screwed down , screwed for iron pipe or for brass ferrule etc complete all as specified and as directed .Make: Prayag / CERA/Johnson

Supply and fix PVC connections 15 mm size with PTMT nuts 450mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Supply and fix 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Note :Make of PVC(SWR) Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Note :Make of PVC(SWR) Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110mm bore PVC (SWR) bend any radius with access door complete all as specified and as directed. Note :Make of PVC(SWR) Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 75 mm bore PVC (SWR) bend any radius with access door complete all as specified and as directed. Note :Make of PVC(SWR) Pipe :Finolex/Supreme/Prince (ISI MARKED)

Material and labour for Chequered cement concrete tile of size 30cmx30cmx25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floor over and including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed

Supply and fix Vitreous China urinal bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) Complete all as specified and as directed.

Supply and fix PVC waste pipe 900mm long suitale for washhand basin Complete all as specified and as directed.

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m depth in any type of soil for laying of cables,pipes etc/ up to top of drain pipe complete all as specified and as directed.

Material and labour for Concrete bed to drain pipe 150mm dia SGSW pipe line including packing under and haunching against the sides of pipes after they laid and tested in cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate complete all as specified and as directed.

Material and labour for 150mm bore RCC pipes class NP-2 ( ISI MARKED) laid in trenches and jointed in cement mortar 1:3 complete with collar complete all as specified and as directed.

Material and labour for Providing cement concrete 1:2:4 type B1 (Using 20mm graded aggregate in coping including necessary steel form work complete all as specified and as directed

Material and labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in channel and benching. etc including necessary steel form work complete all as specified and as directed

Extra for forming Fair finished drain or channel 25 CM inner girth in cement concrete using extra cement including forms, moulds etc., complete all as specified and as directed.

Material and labour for Rendering 15mm thick in CM 1:4 other than fiar faces of brick/PCC block masonry work and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Precast RCC slab 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover slab /slab and set in CM 1:6 including necessary steel form work/moulds complete all as specified and as directed.

Cutting into exiting manholes for connecting new drain making good to pipe and rendering cutting out (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) smooth furnished and forming benching as required for 150 mm dia pipe complete all as specified and as directed.

Supply and fix 52mm thick PVC Partition consisting of 12mm thick plain solid PVC ply sheet reinforced with frame work made from 40mm x 20mm MS tubes. In between two MS tubes, 5mm thick Plain heat moulded 'C channel of size 75mmx50mm with feathered edges shall be fixed on the floor, wall and ceiling. Plastic ply panel shall be inserted in the PVC 'C channel. The first & last MS tube should be errected such that it is inside a PVC 'C channel, in between adjoining plastic panel, 5mm thick x75mm width plain PVC sheet feathered at edges shall be stick on the front & back face using solvent cement complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing)and removal of rubbish off the premises complete all as specified and as directed.

Material and labour for Vitrified Ceramic tile of 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.Note : Make of Vitrified Ceramic tile :Johnson/Naveen/Somany

Material and labour for 25 mm thick 2nd class hardwood boarding in floors and skirting, planned one side, with butt joints and fixed with nails supplied and fixed etc complete all as specified and as directed.

Taking down/Refixing of Shutters of any description of size exc 1sq. m and n exc 2 sq. m each and taken as credit complete all as specified and as directed .

Material and labour for Complete removal of old wooden surfaces finished with synthetic enamel paint, applying two or more coats of French polishing befor one coat of wooden primer on old wooden surfaces of any description, width or girth complete all as specified and as directed .

Supply and fix Butt hinges, cast brass,with mild steel hinge pin, bright polished and fixed, typeB-11,100mm size complete all as specified and as directed .(ISI MARKED)

Supply and fix Butt hinges, cast brass,with mild steel hinge pin, bright polished and fixed, typeB-11,75mm size complete all as specified and as directed ..(ISI MARKED)

Supply and fix 100mm long Brass handle cast type,polished bright complete all as specified and as directed ..(ISI MARKED)

Supply and fix 150 mm long Brass handle, cast type,polished bright complete all as specified and as directed . .(ISI MARKED)

Supply and fix 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed . .(ISI MARKED)

Supply and fix 375 mm long Brass skeleton tower bolts with cast brass plate and staples and rolled or drawn brass bolt and fixed complete all as specified and as directed . .(ISI MARKED)

Hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads and removal of debris off the premises complete all as specified and as directed .

Supply and fix 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each panecomplete all as specified and directed .Note:Make of Glass :Saint Gobain/Modi Guard/Gold fish

Material and labour for Complete removal of existing treatment on wall with wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots and applying two coats of Oil Bound Distemper over a coat of primer and a layer of 1 mm thiock J K Birla wall care putty complete all as specified and as directed .

Material and labour for Complete removal of old plastered/unplasterd surfaces of wall and brooming down and appyling two coat of exterior emulsion paint over a coat of water based primer (Make :Apex ultima - Asian paint) complete all as specified and as directed .

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15cm thick above or below ground level/pre cast cement articles and pre cast concrete block walling built in cement mortar including all quions ,arches and pillars etc including removal of debris off the premises complete all as specified and as directed.

Dismantling of asbestos cement (corrugated, semi corrugated, translucent etc.) sheets in roof coverings including removal of debris off the premises and serviceable items taken as credit complete all as specified and as directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit completer. all as specified and as directed.

Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc 15 cm and removing rubbish off the premises and old unserviceable timber battens of any description taken as credit complete. all as specified and as directed.

Taking down cement plaster on brick or stone walls built in cement mortar and removal of debris off the premises complete all as specified and as directed .

Material and labou for Complete removal of existing treatment on wall with wire brushing, scrapping down smoke soot, mould, moss and efflorescent salt, trading oil and greasy spots filling holes, cracks with cement base putty and applying two coat of white wash complete all as specified and as directed.

Material and labour for Preparation of old decoreted surface of wall and applying One coat of cement base paint complete all as specified and as directed.

Taking down chowkats with shutters n exc 1.50 sqm each (without taking off shutters from the frame) and taken as credit complete all as specified and as directed .

Supply and fix in repairs Vitreous china squatting pan, Orissa pattern size 580 x 440 mm white with integral foot rest including 'P' or 'S' trap etc.including provision of lime concrete bedding .complete all as specified and as directed.

Taking up or down steel tubing and connections 15mm dia bore of pipe and taken as credit .complete all as specified and as directed.

Description all as per item no :109 here in before but 20 mm bore dia orf pipe

Cutting , chases for connection water tubing and making good in CM 1:3 cutting not exceeding 10cm grith in stone concrete block or slab wall complete all as specified and as directed.

Dismantling of old unserviceable submain wiring of aluminium conductor cable of any type and size and taken as credit complete all as specified and as directed.

Material and labour for Point wiring with FRLS PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm nominal cross sectional area for phase and neutral including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system and provision of FRLS PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm connected to common earth dolly including provision of suitable size cast iron/pressed steel terminal box 1 mm thick duly painted inner and outside with anti corrosive paint for mounting switches, sockets, fan regulators, bell pushes etc covered with 3 mm thick plastic laminated sheet cover with brass screw,cup washer for one light point controled by one 1 way switch complete all as specified and as directed.NOTE. (i) Make of PVC cable :Finolex/Polycab/Havells (ii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Description all as per item No. 112 here in before but for one fan/exhaust fan point controlled by one switch and regulator.

Description all as per item No. 112 here in before but for one 3 pin socket outlet,control by one switch with other switches on the same board.

Description all as per item No. 112 here in before but for one 05 amps socket outlet on independent board.

Description all as per item No 112 here in before but complete with 1100volt grade FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core and one run of FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core of upto earth dolly for 15 Amps socket outlet independent .

Description all as per item No 112 here in before but complete with 1100volt grade FRLS PVC insulated unsheathed multistranded wire with 4.0 sqmm copper cable ,single core and one run of FRLS PVC insulated unsheathed multistranded wire with 4.0 sqmm copper cable ,single core of upto earth dolly for 15 Amps socket outlet independent .

Supply and fix Modular switch type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Indo Asian

Supply and fix in repairs Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Indo Asian

Supply and fix in repairs Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Indo Asian

Supply and fix Modular switch piano type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Indo Asian

Supply and fix in repairs PVC /Poly carbonate Ceiling rose surface bakelite of size 63.5 x 20 mm, three terminals complete all as specified and as directed . Make : Anchor/ Cona / Havells

Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 6.00 Sq mm drawn through in and including PVC conduit in ivory/Grey/white colour ,medium grade with all necessary fittings fixed in wall/ceiling and Provn of one run of 6.00 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly including dismantling of old unserviceable submain wiring of aluminium conductor cable of any size and taken as credit complete all as specified and as directed. NOTE:(i) Two runs of 6.00sqmm and one run of 6.00 sqmm and one run of PVC conduit will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/Havells (iii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Supply and fix inverter LED INTEGRATED BATTEN tube light fitting type 20 watt with square profile and polycarbonated channel ,Lithium ion battery with charging time 8 to 10 hours and back up time upto 4 hours complete with all accesories internally pre-wired and including connecting up with FRLS PVC twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed . Note : Make : Havells cat part no LHEXACP7FN1W020 - PRIDE PLUS 20W INVERTER BATTEN OR equivalent in CG/Philips

Supply and fix inverter LED INTEGRATED BATTEN tube light fitting type 10 watt with square profile and polycarbonated channel ,Lithium ion battery with charging time 8 to 10 hours and back up time upto 4 hours complete with all accesories internally pre-wired and including connecting up with FRLS PVC twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed . Note : Make : Bajaj OR equivalent in CG/Philips

Supply and fix in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including GI pipe medium grade and bracket of suitable size fixed to pole /wall and connecting up driver with FRLS PVC three core flexible copper conductor cable of suitable size complete all as specified and as directed. . Note : Make : Havellscat part no LHETACU7IA7J035 - Endura Sundown 35W OR equivalent in CG/Philips

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm with necessary grouting and fixing arrangements and provision of 3 core FRLS PVC flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed .. Note : Make:-Almonard /Crompton/Orient

Supply and fix Factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified and as directed.Note :Make :L&T/Indo Asian/Legrand

Supply and fix in replacement MCCB,4 pole ,125 Amps , 16 KA , C Series current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and as directed..Note :Make :Indo Asian/L&T/Siemen

Supply and fix Factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 6 SP MCBs as outgoings complete all as specified and directed .Note :Make :Indo Asian/L&T/Siemen

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP following poles and current carrying capacity in the MCB DB complete all as specified and directed .Note :Make :Indo Asian/L&T/Siemen

Supply and fix MCB SP 240 Volt of capacity 6 to 40 Amps 10 KA‘C’ curve complete all as specified and as directed. .Note :Make :Indo Asian/L&T/Siemen

Supply and fixing factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed on wall sunmica board and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified & directed Make - L&T / Legrand/ Indo Asian

Material and labour for Earthing complete with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground in vertical position, earth pit not less than 2.25 Metre deep below ground level with top edge of the plate not less than 1.5 Metre below ground level connetced with galvanised iron earth lead wire of size 4 mm dia(Upto 7.50 metre length) by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary excavation & earth work, returning filling and removal of surplus earth upto a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 3 of MES Schedule Part-I complete to obtain less than 1 Ohm earth resistance, fiaxed in repairs complete all as specified and as directed.

Supply, lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of Cross sectional area 25 Sqmm, 3.50 core laid in trenches or fixed to wall / passing through pipe / pole compete all as specified and as directed. Note : (i) Excavation & earth work, Brick protection and sand cushining shall be measured and paid for separately under relevent items in this BOQ (ii) Make of XLPE Cable : Gloster/Polycab/CCI

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m depth in any type of soil up to top of drain pipe,laying of cable etc complete all as specified and as directed.

Material and labour for Double wall corrugated HDPE pipes of ISI marked 63 mm outer dia and 50 mm inner dia as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc complete. all as specified and directed.Note :Make : Rex/ Ketron/Duraline

Supply and fix Galvanised iron water tube 'light grade' of size 40 mm bore with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc.and clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed.Note:Make of GI Pipe :TATA/JINDAL/ZENITH (ISI MARKED)

Material and labour for point wiring with FRLS PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm nominal cross sectional area for phase & neutral in & includingPVC CASING CAPPING of suitable size ISI marked with all accessories in wiring system & 1.5 sqmm green PVC insulated copper conductor connected to common earth dolly including provision of suitable size PVC surface Box including dismantling old unserviceable point wiring and with sunmica top cover for mounting switches/sockets etc, complete all as specified and as directed. NOTE. (i) Make of PVC cable :Finolex/Polycab/Havells (ii) Make of PVC casing/capping: Avon Plast/Presto plast /Garware (a) one light point controled by one 1 way switch, all as specified and as directed.

Description all as per item No. 141 here in before but for one fan/exhaust fan point controlled by one switch and regulator.

Description all as per item No. 141 here in before but for one 05 amps socket outlet on independent board.

Description all as per item No. 141 here in before but for One socket point controlled by one switch with other switches on same board

Description all as per item No 141 here in before but complete with 1100volt grade FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core and one run of FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core of upto earth dolly for 15 Amps socket outlet independent .

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louver, RPM 1200, Copper winding with necessary grouting and fixing arrangements and provision of 3 core flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed

Material and labour for Sub main wiring of any type and size and provision of new sub main wiring with 2 runs of single core PVC insulated unsheathed multistranded copper conductor cables FRLS of size 6.0 Sq mm drawn through and including PVC casing capping of suitable size with all necessary fittings and provn of one run of 6.0 sqmm PVC insulated unsheathed multistranded copper conductor double core cable as earth continuity conductor and connecting to common earth dollycomplete all as specified and as directed. Note :- 02 run of 6.0 sqmm and 01 run of 4.0 sqm including 01 run of PVC CASING CAPPING will be measured as one length

Taking up or down steel tubing of size upto 40 mm bore and connections, including cleaning for refixing or removal to store as per specified and directed.

Suplly and lay 40 mm outer dia CPVC pipes SDR 11 Fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Suplly and lay 25 mm outer dia CPVC pipes SDR 11 Fittings on walls/ceiling or laying in floors complete all as specified and as directed

Material and labour for 1000 litres capacity rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes and 25 mm dia PTMT ball valves high pressure (minimum weight 210 grams) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe ,hoisted, fixed in position and testing complete including demolition/taking down of the existing RCC/PVC water storage tank of any description from the existing staging/ Bldg after disconnecting and dismantling of all existing pipe line connections carefully all as specified and directed.Note:MAKE OF TANK Sintex/Infra/Polycon, Make of Ball valve : PRAYAG/M/S SHAKTHI INDUSTRIES/WATERTEC

Supply and fix 40 mm bore dia gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed.Make : Leader/Kirloskar/Kartar

M/s. KIRAN M CHOUGULE

M/s. J P CONSTRUCTIONS

M/S JAYDEEP CONSTRUCTION

SHRI.H.R.PATIL

M/s. VIJAY ELECTRICALS

M/s.Y.N.PATIL

M/s S N Atiwadkar

DHANSHRI ENTERPRISES

M/S MAHADEV M PATIL