REPAIRING OF FLOOR OF OIL PIT AND INSTALLATION OF ELECTRIC CHAIN HOIST AND EXTENTION WORK OF OLD TESTING SHED AT HARDOI WORKSHOP

Amount

Repairing of Old Oil pit Floor , Insallation of 3 MT Motrized Chain Pully Block and Extension of Height of Old shed (02)

Dismantling of old & damage GI Sheets of existing structure with labour & shifting up to 50 mtr. (CSI No. 15.07)

Excavation in foundation in soil mixed with moorum/shingle/kankar requiring the use of special T&P such as pickaxes, sabbals etc including lift 30 m and including filling ,watering & ramming of excavation earth into the trenchs or into the space between the building & slides of foundationcomplete size of 1.5mx1.2mx1.5m for (8 nos.) column for 4''x 4" Hollow M.S. Pipe including all T&P, labour charges etc.

Concreting & grouting of 8 nos. 4"x4" hollow MS pipe with ratio of 1:6:12 and size of .45mx.45mx1m including all materials, T&P , Labour charges

Supply and fabrication of 8 nos. column of 4"x4" hollow M.S. Pipe in height of 6.0 mtr with proper welding , grinding & fixing etc.

TOP PLATE:- Top plate "Double" size 300 x 300 x 12 mm thick supply and installation with proper welding on column with clit support.

Truss section - Supply and fabrication outer section incliend / vertical SHS 45x45x3 mm with proper welding and grinding including all related materials,T&P & Labour charges etc.

Purlin Section - Supply & fabrication of Purlin section with 2"x2" with proper welding and grinding including all related materials,T&P & Labour charges etc.

Providing & fixing of precoated galvanished iron sheet for Horizontal direction

Painting or Varnishing over new iron structure

Supply & installation of Electrical equipments fan, light,including complete wiring with fitting.

Repairing of plateform by 3 inch thick PCC in the ratio of 1:5:10 and 4 inch thick CCin the ratio of 1:2:4 all around the oil tank

Providing , Fabrication & fixing of MS Channel 100x50 mm all around the pit area .( Total length appox 62 feet)

Providing , Fabrication & fixing of 4 mm thick MS plate over the concrete area all around the tank & fixing with MS channel and tank body by welding and cutting (appox. [email protected]/sq ft

RS JOIST 150x75x6.5 MM (TOTAL LENGTH 71 FEET )

Erection & Grouting of Holding supports (RS Joist) is to be properly grouted in earth complete in all respect.

MS plate of 10 mm thick size 200x200 mm on the bottom & top of vertical RS Joist

Stone pad of 6 inch thick size 500x500 mm

Providing & fixing of chain electric hoist of 3.0 M.T. Capacity tested to 25% overload as per I.S. 3938-1983 or latest edition having lift of 6.0 Mtr. With squirrel-cage induction electric motor as per I.S. 325, 2 H.P. , 415 Volts 50 Cycle (±6) Crompton or equivalent make with pendent push button, control of hoisting and lowering motions from ground level and failed-safe electromagnetic Disc-type brakes for total safety as per standard manufactures detailed specification. The contractors have to provide the Trolly arrangement for moving the chin hoist horizontally on the RS joist.

Fabrication & Erection of 150x75x6.5 MM RS Joist structure of size 26'X23' having height of approximately 16' above ground level. The structure is to be made on four columns. All four columns are to be fixed by 20' long 150x75x6.5 RS joist on 2 sides & 2 sides by MS Channel horizontaly. One R. S. joist is to be fixed on the middle for holding the motorized chain Pully block.

Repairing of Old Oil pit Floor , Insallation of 3 MT Motrized Chain Pully Block and Extension of Height of Old shed (03)

Repairing of plateform by 3 inch thick PCC in the ratio of 1:5:10 and 4 inch thick CCin the ratio of 1:2:4 all around the oil tank

Providing , Fabrication & fixing of MS Channel 100x50 mm all around the pit area .( Total length appox 68 feet)

Providing , Fabrication & fixing of 4 mm thick MS plate over the concrete area all around the tank & fixing with MS channel and tank body by welding and cutting (appox. 239 @2.8kg/sq ft

RS JOIST 150x75x6.5 MM (TOTAL LENGTH 152 FEET)

MS plate of 10 mm thick size 200x200 mm on the bottom & top of vertical RS Joist

Providing & fixing of Manually chain hoist of 3.0 M.T. capacity for vertical motion & fabrication and erection of moving trolley arrangement for horizontal movement of Chain Pully Block on RS joist.

Fabrication & Erection of 150x75x6.5 MM RS Joist structure of size 26'X23' having height of approximately 16' above ground level. The structure is to be made on four columns. All four columns are to be fixed by 20' long 150x75x6.5 RS joist on 2 sides & 2 sides by MS Channel horizontaly. One R. S. joist is to be fixed on the middle for holding the motorized chain Pully block.

Making Arrangement for cleaning of core assembly by providing high pressure JET pump in pit area with pipe & other accessories

Supply and Installation of Heavy duty Mono Block T/F pump rating 2 HP Single Phase

Supply and installation of pipe lines using heavy duty C class pipe along with valves and T joint connector, L-bow etc. And dagging of Nail (15cm wide and 30cm deep) on the floor/wall (30cm wide and 15 cm deep) for laying of pipe line and filling the Nail back by CC ratio 1:2 complete jobs.

(I) 40 mm thick G.I. pipe conforming to IS 1239 pat-1 (2004) (OD-48.3 mm)

(II) 25 mm thick G.I. pipe conforming to IS 1239 Part-(2004) (OD-37.7mm)

(III) Brass Valves 40 mm (Gate Type) confirming to IS 1239

(1V) Brass Valves 25 mm (Gate Type) confirming to IS 1240

(V) Brass Valves 25 mm (Ball Type) confirming to IS 1239

(VI) Nitrile Rubber Hose pipe ( steel wire braided) 25mm (Oil with standing temperature 100 C)

(VII) T Connector 25 mm of G.I. conforming to IS 1239 part-1 (2004)

(VII) T Connector 40 mm of G.I. confirming to IS 1239 part-1 (2004)

(IX) L- bow of 25 mm G.I. confirming to IS 1239 part-1(2004)

(X) L- bow of 40 mm G.I. confirming to IS 1239 part-1(2004)

Electrical control panel for operation of Motor with appropriate size Cu. Cables, Switches, Indicators complete in all respect confirming to ISS.

Extension of Small Power T/F Testing Shed.

Excavation in foundation in soil mixed with moorum/shingle/kankar requiring the use of special T&P such as pickaxes, sabbals etc including lift 30 m and including filling ,watering & ramming of excavation earth into the trenchs or into the space between the building & slides of foundationcomplete size of 1.5mx1.2mx1.5m for (10 nos.) column for 4''x 4" Hollow M.S. Pipe including all T&P, labour charges etc.

Concreting & grouting of 10 nos. 4"x4" hollow MS pipe with ratio of 1:6:12 and size of .45mx.45mx1m including all materials, T&P , Labour charges

Supply and fabrication of 10 nos. column of 4"x4" hollow M.S. Pipe in height of 7 mtr with proper welding , grinding & fixing etc.

TOP PLATE:- Top plate "Double" size 300 x 300 x 12 mm thick supply and installation with proper welding on column with clit support.

Purlin Section - Supply & fabrication of Purlin section with 2"x2" with proper welding and grinding including all related materials,T&P & Labour charges etc.

Providing & fixing of precoated galvanished iron sheet for Horizontal direction

Painting or Varnishing over new iron structure

Supply & installation of Electrical equipments fan, light,including complete wiring with fitting.

R.D. ENTERPRISES

A. A. ENGINEERING CO.