SPECIAL REPAIR REPLACEMENT OF OH LINE WITH UG CABLE AT TECH AREA AT 24 ED AF STN MANAURI

Amount

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5mtr in depth for laying of cable etc and getting out in soft/loose soil, complete all as specified and directed. (NOTE: Excavation & earthwork for cables shall be carried out by JCB's or manual method as per direction of Engineer-in -Charge).

Returning & filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in soft/ loose soil, complete all as specified and directed.

Removing excavated material not exceeding 50 Mts and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.

M&L for sand cushioning (dry sand) to under ground cable for cable protection with layer of 8 cm deep before laying the cable and 15 cm depth after laying the cable, complete all as specified and directed. Note : Punned thickness of sand layers shall be measured and paid . (NOTE : Punned thickness of sand layers shall be measured and paid).

M&L for brick old sub class 'B' well burnt, laid dry flat in trenches for protection of cable over LT/HT cable, complete all as specified and directed.

Supply, laying, jointing, testing & commissioning in trenches/ fixing with pole/ connecting, thembling, glanding of XLPE insulated under ground screened PVC bedded, galvanised steel strip or wire armored, electric power cable (Heavy duty) 1100 volts grade with stranded aluminum conductor of size 16 Sqmm 4 core (earthed) complete all as specified and directed. (NOTE: Excavation & earth work, sand cushioning, brick protection shall be measured and paid under respective items).

All as per item No-6 here in above but of size 25 Sqmm 4 core (earthed)

All as per item No-6 here -in- above but of size 35.00 Sqmm 3.5 core (earthed)

All as per item No-6 herei-in- above but of size 50.00 Sqmm 3.5 core (earthed)

All as per item No-6 here-in-above but of size 70.00 Sqmm 3.5 core (earthed)

All as per item No-6 here-in-above but of size 95.00 Sqmm 3.5 core (earthed).

All as per item No-6 here-in-above but of size 120.0 Sqmm 3.5 core (earthed).

All as per item No-6 here-in-above but of size 240.00 Sqmm 3.5 core (earthed)..

Boring of holes under road/drain/PCC path by mannual method for inserting upto 150mm dia of bore pipe light grade GI tubing for cable protection complete all as specified and directed. (NOTE: Depth of bore shall not be more than 1.5m below natural Ground level.)

Supply and fixing to 40mm bore, galvanised steel tube, light grade with and including all fittings accessories such as clamp etc laid in trenches, under road crossing, fixed on poles/walls for cable protection complete all as specified and directed.

All as per item No 15 aove but size 50mm bore, galvanised steel tube, light grade.

All as per item No 15 aove but size 80mm bore, galvanised steel tube, light grade.

M&L for earthing of LT Panel feeder pillar etc with galvanised iron earth plate of size 600 x 600 x 6mm thick burred directly in ground not less than 2.25 Mtr below normal ground level, earth plate packed on all side with charcoal mixed with salt to a thickness of 150mm connected by GI earth strip of size 32 x 6mm thick soldered and riveted to earth plate. GI earth strip will be protected by using 50mm bore light grade GI pipe earth plate to steel tubular pole including flat iron clamp 25 x 3 mm including bolts nut and washers complete including watering GI pipe 20mm dia light grade 2.5 Mtr long the earthing include PCC pit including necessary earth work and disposal of surplus soil to a distance not less than 50mtr, chamber of PCC (1:4:8) type D2 using 40mm graded stone aggregate, coping shall be PCC(1:3:6) type C1 using 20mm graded stone aggregate, RCC pit cover 50mm thick (1:2:4) type B1 using 20mm graded stone aggregate, reinforced with 8mm MS bar at 80mm C/C both way in lieu of CI pit cover and angle iron frame including flame funnel, wire mess, GI earth wire, 8 SWG under the earth and on the pole upto height of 1.5mtr shall be protected by 15 MM dia GI pipe (Light grade) GI pipe to be fixed with pole by means of 2 Nos flat iron clamps 25 x 3mm size with bolts with nuts washers etc complete all as specified and directed and shown in electrical plate No 3 of MES SSR part -I 2009. NOTE:- 1. GI earth strip upto & including 7.5RM from the earth test point shall be deemed included in quoted unit rate. 2. GI earth strip beyong 7.5 RM length form the test point shall be measured and paid seperately under respective items

Supply, Installing, testing and commissioning of LT Panel in cubical housing cabinet, out door type, platform mounted (minimum height 45 cm above normal GL and 30 cm below normal GL) , CPRI approved factory made, totally enclosed, dust and vermin proof made out by 3.15mm thick CRCA MS sheet of overall indicating size 1200 x 900 x 450mm and full built upon angle iron frame in size 40 x 40 x 6 MM, having front and rear hinged both side openable doors and lifting lugs (02 Nos) , locking arrangement to be connect to earthing strip at rear side, bottom detachable both side openable ,gland plate complete with suitable size zinc plated and passivated nut, bolts, spring and washers sheet steel bus bar chambers having front hinged covers with a set of electrolytic grade high conductivity. The cabinet and all members should be chemically treated with MSR solution for anticorrosive treatment. The panel shall be epoxy powder coated and the control circuit shall be connected by multi stranded copper conductor flexible wire 1.5 Sqmm in proper colour coding and drawn through in flexible conduit. The panel should be suitable for 415 volts ,50 Hzs, 3 phase wire system ,suitable rating CTs and PTs . internal connection should be made by copper strip in suitable rating ,making incoming and outgoing connection using gland in suitable size including grouting KIOSK on floor (60cm above the ground surface) in floor angel iron 50 x 6 MM imbedded to fixed the KIOSK with nut bolt, floor PCC (1:2:4) type B1 using 20 MM grade stone aggregate (minimum 50cm above GL and 30cm below GL) including name plates/ danger plates & other configurations of cross bones) danger identification & lugs etc of same are (Make for MCCB : Schneider / Legrand/ Sciemens) complete comprising the following items :-

Note : (i) Panel drawing shall be approved by Deptt for size and all Tech specification before placing order (ii) All MCCB shall be confirming to Icu 100% and IEC 60947 -2 . in compact series of same make (Make for MCCB : Schneider / Legrand/ Siemens:- (a) 04 Nos bus bars equal size made out of aluminum conductor strip in colour coating 600 Amps rated mounting on both side heat shrinkable insulators and PVC sleeving. -01 Set (b) LED indicating lamps of 'R' 'Y' and 'B' phase. Set of three -01 (c) Digital volts meter rating 3 phase class 1 - 01 No (Make :- L&T cat No. WDS 301FE 00 or equivalent) (d) Digital Ammeter rating 3 phase 1A class 1 - 01 No Make :- L&T cat No. WDS 301OCA 00 (Make :- L&T cat No. WDS 301FE 00 or equivalent) (e) Digital kWh (Energy) Meter rating 3 phase 4 W, 5 A class 1 with RS 485 port - 01 No (Make :- L&T cat No. WM30JFC3CRS or equivalent) INCOMING :- (f) MCCB ,250 Amps rated, 4 pole, TPN, 415 volts grade , 36 KA breaking capacity micro processed based operated - 01 Nos (As main incomer). OUTGOING :- (g) MCCB ,100 Amps rated, 4 pole, TPN, 415 volts grade , 16 KA breaking capacity thermal magnetic based operated - 05 Nos (04 Nos out going and 01 No as stand by above )

Supply, Installing, testing and commissioning of LT Panel in cubical housing cabinet, out door type, platform mounted (minimum height 45 cm above normal GL and 30 cm below normal GL) , CPRI approved factory made, totally enclosed, dust and vermin proof made out by 3.15mm thick CRCA MS sheet of overall indicating size 900 x 750 x 450mm and full built upon angle iron frame in size 40 x 40 x 6mm, having front and rear hinged both side openable doors and lifting lugs (02 Nos) , locking arrangement to be connect to earthing strip at rear side, bottom detachable both side openable ,gland plate complete with suitable size zinc plated and passivated nut, bolts, spring and washers sheet steel bus bar chambers having front hinged covers with a set of electrolytic grade high conductivity. The cabinet and all members should be chemically treated with MSR solution for anticorrosive treatment. The panel shall be epoxy powder coated and the control circuit shall be connected by multi stranded copper conductor flexible wire 1.5 Sqmm in proper colour coating and drawn through in flexible conduit. The panel should be suitable for 415 volts ,50 Hzs, 3 phase wire system ,suitable rating CTs and PTs . internal connection should be made by copper strip in suitable rating ,making incoming and outgoing connection using gland in suitable size including grouting KIOSK on floor (60 CM above the ground surface) in floor angel iron 50 x 6mm imbedded to fixed the KIOSK with nut bolt, floor PCC (1:2:4) type B1 using 20 MM grade stone aggregate ( minimum 50cm above GL and 30cm below GL) including name plates/ danger plates & other configurations of cross bones) danger identification & lugs etc are complete comprising the following items:- Note : (i) Panel drawing shall be approved by Deptt for size and all Tech specification before placing order (ii) All MCCB shall be confirming to ICU 100% and IEC 60947 -2 . in compact series of same make ( Make for MCCB : Schneider / Legrand/ Siemens).

Note :- (i) Panel drawing shall be approved by Deptt for size and all Tech specification before placing order (ii) All MCCB shall be confirming to Icu 100% and IEC 60947 -2 . in compact series of same make (Make for MCCB : Schneider / Legrand/ Siemens:- (a) 04 Nos bus bars equal size made out of aluminum conductor strip in colour coating 600 Amps rated mounting on both side heat shrinkable insulators and PVC sleeving. -01 Set. (b) LED indicating lamps of 'R' 'Y' and 'B' phase. Set of three -01 (c) Digital volts meter rating 3 phase class 1 - 01 No (Make :- L&T cat No. WDS 301FE 00 or equivalent) (d) Digital Ammeter rating 3 phase 1A class 1 - 01 No (Make :- L&T cat No. WDS 301FE 00 or equivalent) (e) Digital kWh (Energy) Meter rating 3 phase 4 W, 5 A class 1 with RS 485 port - 01 No (Make :- L&T cat No. WM30JFC3CRS or equivalent) INCOMING :- (f) MCCB ,125 Amps rated, 4 pole, TPN, 415 volts grade , 36 KA breaking capacity micro processed based operated - 01 Nos (As main incomer). OUTGOING :- (g) MCCB ,63 Amps rated, 4 pole, TPN, 415 volts grade , 16 KA breaking capacity thermal magnetic based operated - 04 Nos (03 Nos out going and 01 No as stand by alone )

Supply. Install, testing and commisioning of LT feeder Pillar box in cubical housing cabinet, out door type, for making connection juction point platform mounted (minium height 45 cm above normal GL and 30 cm below normal GL) , CPRI approved factory made, totally enclosed, dust and vermin proof made out by 3.15 MM thick CRCA MS sheet of overall indicating size 900 x 650 x 450 MM and full built upon angle iron frame in size 40 x 40 x 6 MM, having front and rear hinged both side openable doors and liffting lugs (02 Nos) , locking arrengement to be connect to earthing strip at rear side, bottom detachable both side openable ,gland plate complete with suitable size zinc plated and passivated nut, bolts, spring and washers sheet steel bus bar chambers having front hinged covers with a set of electrolytic grade high conductivity. The cabinet and all members should be chemically treated with MSR solution for anticorrosive treatment. The panel shall be epoxy powder coated and the control circuit shall be connected by multi strandered copper conductor flexible wire 1.5 Sqmm in proper colour coading and drawn through in flexible conduit. The panel should be suitable for 415 volts ,50 Hzs, 3 phase,4 wire system ,suitable rating CTs and PTs making all connection using gland in suitable size including grouting KIOSK on floor (60 CM above the ground surface) in floor angel iron 50 x 6 MM imbeded to fixed the KIOSK with nut bolt, floor PCC (1:2:4) type B1 using 20 MM grade stone aggregate ( minium 50 CM above GL and 30CM below GL) complete including name plates/ danger plates & other configurations of cross bones) danger identification & lugs etc (Make for MCCB : Schneider / Legrand/ Sciemens) complete comprising the following items :-

Note :- (i) Panel drawing shall be approved by Deptt for size and all Tech specification before placing order (ii) All MCCB shall be confirming to Icu 100% and IEC 60947 -2 . in compact series of same make (Make for MCCB : Schneider / Legrand/ Siemens:- (a) 04 Nos bus bars equal size made out of aluminum conductor strip in colour coating 600 Amps rated mounting on both side heat shrinkable insulators and PVC sleeving. -01 Set. (b) LED indicating lamps of 'R' 'Y' and 'B' phase. Set of three -01 (c) Digital volts meter rating 3 phase class 1 - 01 No (Make :- L&T cat No. WDS 301FE 00 or equivalent) (d) Digital Ammeter rating 3 phase 1A class 1 - 01 No (Make :- L&T cat No. WDS 301FE 00 or equivalent) INCOMING :- (e) MCCB ,125 Amps rated, 4 pole, TPN, 415 volts grade , 36 KA breaking capacity micro processed based operated - 01 Nos (As main incomer).

Taking down/dismantling of OH line with ACSR, insulators cross arm GI earth wire etc all in any size and specification from the existing pole for making sch of credit to contractor as site complete all as specified and directed. (NOTE: Qty of dismantled ACSR conductor or shall be got verified by BOO including lagging length and after then credited to contractor as per rate fixed by MES in schedule of credit)

Labour for removing from site to ACSR of OH line minium 04 runs in proper coil winding with connecting accessories such as insulator, cross arms etc all as site deposting in MES yard complete all as specified and directed. Note ; Span shall be considered against distance between two poles. NOTE: Span shall be considered against distance between two poles but n.exc.50RM including permissible sagging).

Dismantling stay assembly (Demolition of concreate etc.), complete all as specified and directed by Engr-in-Charge.

S&F in replacement to shock proof, fire retardant rust proof, out door pole kiosk box of size 295 x195 x100 MM made out of one piece Engineer plastic moulding of siemens grey colour with in built 4 aluminium strip of 60 Amp rating fitted on DMC unbrakable insulator with MCB SPN 40 Amp including fixing arrangement as clamps made out by GI strip in size 32 x 6 MM and nut bolts washer with painting in two coat syenthic enamel paint over one coat of red oxide primer etc all complete all as specified and directed. (Make : Model- GSJB-3020 of Sintex or equivalent as approved by AGE (I) from list of make & manufacturers).

Supply and fixing three core copper flexible wire, PVC insulated sheathed copper conductor muiti strandard in 1.5 Sqmm size for making inter connection of street/ road light fittings from control box to fittings drawn through in steel tubular pole including lugs / thimbles in required size etc complete all as specified and directed.

M&L for LT panel plinth foundation work with existing LT panel as working space using cement concrete in ratio 1:2:4 as required with brick work in minium size 1.5 Mtr X 0.9 Mtr X 0.75 Mtr ( 40 CM above and 30 CM below in normal GL) including plastering in varrious location given by Deptt complete all as specified and directed.

M&L Rubber mat in size 1Mtr x 1.5 Mtr with 10 MM thickness ISI marked complete all as specified and directed.

M&L for painting on complete body in and out side of existing LT panel in any size and specification at varrious location after removing old fadded paint scarping , cleaning rubbing etc all for making smooth to surface using shyenthic enamel paint in two coat (one as finishing) over one coat of red oxide primer complete in external and internal surface incl marking as given in deffrent colour, cutting, welding, jointing replacing hinges etc complete all as specified and directed. (Note : Colour of paint shall be approved by Deptt).

M&L for painting on steel tubuler pole in any specification at varrious location after removing old fadded paint scarping , cleaning rubbing etc all for making smooth to surface using aluminium paint in two coat (one as finishing) over one coat of red oxide complete in external and internal surface with GI pipe bracket, clamp nut bolt etc all as site with marking as given in deffrent colour complete all as specified and directed.

Supply errecting fixing as new to steel tubular swaged poles complete with cast iron base plate minumum 6 mm thick finial taper plug bolt nut screws 410 SP 31 type 9 Mtr long painting by black paint in two coat in internal surface and aluminium paint in two coat (one as finishing) over one coat of red oxide primer in external surface and making alternate strip in 30 CM width upto 1.5 Mtr above normal groung level using diffrent colour with marking serial No etc complete all as specified and directed. Note :- PCC foundation and coping shall be measured and paid under respective items.

M&L for pole foundation in plain cement concrete type B 2 in ratio 1:2:4 using 40 mm graded stone aggregate complete all as specified and directed.

M&L PCC Pole coping cement concrete type B-1 in ratio (1:2:4) using 20 mm graded stone aggregate including use & waste of form work complete all as specified and directed.

Bharat Trading Company

shubham construction

SHAM AND SONS ENGINEERING WORKS

M/S MALHOTRA ENGINEERING WORKS

R.K.ASSOCIATES

M/S AM ENTERPRISES