Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.1 LAccepted-Finance | ₹5.1 L | L1 | Accepted-Finance L1 Bidder |
| 2 | L2₹5.2 L+₹10,316.10 (2.03%)Rejected-Finance | ₹5.2 L+₹10,316.10 (2.03%) | L2 | Rejected-Finance Bid is not L1 |
| 3 | L3₹5.3 L+₹19,910.07 (3.92%)Rejected-Finance | ₹5.3 L+₹19,910.07 (3.92%) | L3 | Rejected-Finance Bid is not L1 |
| 4 | Rejected-Technical | - | - | Rejected-Technical Document not provided as per NIT |
| 5 | Rejected-Technical | - | - | Rejected-Technical Document not provided as per NIT |
Tender Value
₹5.2 L
EMD Value
₹10,316
Closing Date
17 Jul 2026, 1:00 pmClosed
EE KWD PWD
N S Bldg
Renovation and repair of the wooden partition wall, Table, wall racks, Aluminium sliding doors, Flush door etc. for the Honble Judges Chamber No. 28, Ld. Registrar OS and Committee Clerk office including False Ceiling for Server Room etc. for the
2026_WBPWD_5016349_3
WBPWD/KWD/EE-I/NIT-19/26-27
Open Tender
CIVIL WORKS
Percentage
30 days
High Court Calcutta
Please refer Tender documents.
4 documents required · 4 mandatory
₹10,316
Yes
3 Sept 2026
3 Jul 2026
20 Jul 2026
9 Jul 2026
17 Jul 2026
9 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. | - | Sq.M. | 19 | - |
| 2 | M.S. works in brackets made from flats, angles, tees etc. to sizes specialy bent, twisted, forged; making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washer or screws etc. (length of straight not less than 230 mm) | - | Qntl. | 9,984 | - |
| 3 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m.
In ground floor including roof.
(b) above 150 mm. thick | - | Cu.M. | 1,417 | - |
| 4 | Taking out Mirzapur or glazed porcelain tiles carefully by chiselling from walls or floor including stacking serviceable material as directed. | - | Sq.M. | 106 | - |
| 5 | Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge.
c) 37.5mm thick | 1 | Sq.M. | 587 | ₹586.41 |
| 6 | (a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification [Cement to be supplied by the Department] | 1 | Sq.M. | 87.58 | ₹87.49 |
| 7 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
(i) With 1:6 cement mortar
(b) 20 mm thick plaster | 1 | Sq.M. | 171.65 | ₹171.48 |
| 8 | Scantling upto 50mm wide and 12mm thick (chamfering or rounding) for ceiling/partion battens including fitting, fixing in position with washers, coach screws etc. complete.:
(a) Ordinary teak | - | Mtr. | 104 | - |
| 9 | Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria..
(ii) 66mm x 70mm | 1 | Mtr. | 446 | ₹445.55 |
| 10 | Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria.
In ground floor.
(ii) 25 mm thick | 1 | Sq.M. | 2,581 | ₹2,578.42 |
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.86 MB
2911_ii.pdf
Tender Documents • 1.86 MB
BOQ_5085754.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .