SPECIAL REPAIR TO BUILDING NO P 06 AND ADDITION ALTERATION TO ELECTRIC WORKS TO OTHER BUILDINGS UNDER GE (WEST) FEROZEPUR CANTT

Amount

Dismantling of brick tiles in roof single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near outlet of RWP and OHT staging area complete all as specified and directed.

Demolition of mud phuska in roofs,any thickness,including leeping plaster(whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L brushing neat cement slurry with 3 kg of cement per square meter complete all as specified and directed.

M&L 10mm thick screed bed or bedding layer of mortar in cement mortar 1:4 with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface complete all as specified and directed. Note:- WPC shall be measured and paid for separately.

Supply only water proofing compound complete all as specified and directed.

M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed.

S&F 50 micron thick Polythene film,laid on roof including preparation of roof surfaces complete all as specified and directed.

M&L Mud phuska, 80mm thick average,consolidated thickness, on flat roofs including 25mm thick mud plaster complete all as specified and directed.

S&F 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by wt of cement on mud phuska complete all as specified and directed.

All as per Srl item No.9 here-in-before but using old brick tiles retrieved from dismantling (item no.1 here-in-before) including cleaning and removal of mortar from tiles complete all as specified and directed.

Demolition of reinforced cement cocrete in any position complete complete all as specified.

Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L RCC 1:1.5:3, type B1 (using 20mm graded stone aggregate) as in slabs supported on walls,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L of TMT bars 10 mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified and directed.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm eachcomplete all as specified and directed.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and directed.

S&F pressed steel frames made of 1.25mm thick MS sheet of profile 125mmx60mm for door and window frames with double rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

S&F pressed steel frames made of 1.25mm thick MS sheet of profile 105mmx60mm for door and window frames with double rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

S&F pressed steel frames made of 1.25mm thick MS sheet of profile 75mmx50mm for door and window frames with double rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

S&F 35mm thick second class hard wood, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, sizes of members of shutters as specified in SSR part-I section 8 clause 8.24 supplied and fitted to chowkats complete all as specified and directed.

S&F 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and directed.

M&L cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in filling of steel chowkhats complete all as specified and directed.

S&F 250mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified and directed.

S&F Mild steel pressed handle, oval type, 150 mm size, stove enameled black and fixed with steel screws, complete all as specified and directed.

S&F 200mm long MS barrel tower bolts stone enamelled black with bright bolt complete all as specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

S&F 300 mm,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.

S&F Factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complete to wooden/Steel window not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples as in repair complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing as per specification complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work complete all as specified and directed.

S&F 150mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 125mm Extruded aluminium alloy handle complete all as specified and directed.

S&F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and directed.

S&F powder coated anodised aluminium door, window , ventilator frame including shutter etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of Jindal /Hindalco (or) Equivalent make of approved size with power coating any colour minimum thickness 50 micron including necessary joining cleats, glazing clips, powder coated aluminium snap beading, screws etc including taking down complete all as specified as per manufacturers instructions. Note: Glass Pane and EPDM Rubber beading/gasket will be measured and paid for seperatley.

S&F EPDM Rubber beading around glass in aluminium windows /ventilator shutters complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F 200mm long aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed.

S&F 125mm Extruded aluminium alloy handle complete all as specified and directed.

S&F butt hinges 100mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed.

S&F 4 lever aluminium mortice lock, vertical type size 100 mm complete all as specified and directed.

S&F hydraulically regulated extruded aluminium body door closer designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg etc complete all as speciified and directed.

S&F Chromium Plated curtain rod powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and directed.

Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified and directed.

M&L Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.

All as per item 55 here-in-before but using old bricks retrieved from demolition under item 54 here in before including cleaning and removal of mortar from old bricks.

M&L Brick work in cement mortar 1:4 using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls complete all as specified and directed.

Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints complete all as specified and directed.

M&L external rendering 15mm thick in cement mortar 1:4 on any face of brick wall or concrete surfaces, finished fair and even complete all as specified and directed.

M&L internal rendering 10mm thick in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed.

S&F expanded metal, cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed. Note:- weight of expanded metal shall not exceeding 4 kg/sqm.

Dismantling of floor hearth and wall tiling incl mortar beding and throw rubbish out the premises complete all as specified and directed.

S&F Vitrified ceramic tiles 10mm thick (Square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar1:6 for laying floor finishes complete all as specified and directed.

M&L Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar 1:6 and pointed in white cement with pigment to match the colour of tilescomplete all as specified and directed.

M&L glazed coloured designer ceramic tiles of size 250mmX350mm / 300mmX450mm and 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base of floors finishes complete all as specified and directed.

M&L sand filling under paver block, floors, foundation or cable protection including spreding leveling in layer not exceeding 25cm thick complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and directed. Makes:- SITCO, POOJA CONCRETE, MOHINDRA INDUSTRIES, KB SPUN, SARAL IMPEX, RANA TILES CO, SHINO TILES, RN TILES & PAVERS, SWASTIK ALW

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar

M&L Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed base cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick rendering in cement mortar 1:4 and jointed with complete as per above item no 71 here-in-above.

M&L Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over & including 15mm thick screed in cement mortar 1:4 with pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Demolition of cement concrete in sunken portion of any description and in any position not otherwise specifically provided.

M&L 15mm thick cement mortar 1:3 with WPC on walls as well as on sunken floor portion finished even and smooth without using extra cement. Note:- WPC shall be measured and paid for separately.

M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric(wt. not less than 150 gms/sqm)land on primed surface by forced apllicationcomplete all as specified and directed.

M&L PCC 1:5:10, type E2 (using 40mm graded aggregate) in filling under sunken floor portion complete all as specified and directed.

M&L 30mm thick PCC 1:2:4, type B-1 (using 20mm graded aggregate) as in floor finished even and rough to receive top layer complete all as specified

S&F galvanised steel pipe medium grade 25mm bore as in spout of sunken projecting 15cm beyond the face of wall complete all as specified and directed.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed.

Taking up or down 15 mm existing steel tubing and connections and re-fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as complete all as specified and directed.

Taking up or down 20 mm existing steel tubing and connections and re-fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floor and pavings note exceeding 15 cm thick (below or above GL) complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6, type C-2 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.

S& F in repair Bib tap of cast copper alloy brass but fency type, Chromium plated 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F stainless steel sink with drainage board made of of 1.00mm thick sheet for kitchen with plugs washers38/40mm dia PVC waste pipe and including 38/40mm dia CP waste coupling fixing with cast iron cantilever brackets and connecting union to pipe over all size 915mmX460mm bowl size 410mmX330mmX160mm fixed in repairs complete all as specified and directed.

S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 15mm dia bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 20mm dia bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair, 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) and fixed complete all as specified and directed.

S&F in repair 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup complete all as specified and directed.

S&F in repair 15mm stop cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or brass ferrule fancy type chromium plated with long shank and cup(Concealed type) complete all as specified and directed.

S&F PVC Connection pipe, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and directed.

S&F 600mm long towel rail of brass chromium plated fixed to wall with steel screws and PVC rawl plug as in repair complete all as specified.

S&F CP Soapdish Oval /squaretype as fixed in repairs and all as specified and directed.

S&F single piece WC of size 365mmx655mmx765mm with flushing cistern and connection pipe P or S trap (Closed pattern incl all necessary accessories like rag bolts, kit/gel gasket etc (including flushing cistern, pvc seat cover, jet, Health faucet and flush pipe complete all as specified and directed. Makes :- cera, Parryware, somani or equivalent in approved makes.

S&F central hole basin mixer for wash hand basin including all fittings ie including connection pipe as per manufactures specification complete all as specified and directed. Makes :- cera, Parryware, somani or equivalent in approved makes.

S&F Wall mixture 3 in 1 with provision of overhead shower complete with 115 mm long bend pipe on upper side, connecting legs and wall flange complete all as per manufactures instruction and as directed. Makes:- Parko/ESSCO/Prayag or equivalent in approved makes.

S&F corner glass shelves 300 mm radius 8 mm thick as per sample radius for bathroom, fixed on suitable support of brass chromium plated clips complete all as specified and directed. Makes:- Prayag, Somany, Cera or equivalent in approved makes.

S&F in repair Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing complete all as specified.

S&F in repair chromium plated shower rose 125mm size with or without swivel joint for fixing in 15mm dia pipe complete all as specified and directed.

Dismantling CI pipe alongwith fittings of 50/75/100mm dia,below or above ground level or laid in floors,jointed in cement mortar and taking out complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, fixed to wall or laid in trenches including distance pieces and stack clamp with nuts & bolts complete all as specified and directed.

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified.

S&F 110mm bore, PVC (SWR) bends any radius complete all as specified.

S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified and directed.

S&F PVC(SWR) vent cowl,for 110mm bore pipe complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes (pressure rating not less than 4 Kg/cm2) single socketed, in any length with rubber ring joints, fixed to wall or laid in trenches complete all as specified and directed.

S&F 75mm bore, PVC (SWR) bends any radiuscomplete all as specified and directed.

S&F 1 mm thick wall care putty on exterior wall complete all as specified and directed.

M&L Preparing new surfaces of wood and wood based surfaces of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Preparing new surfaces of steel of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer after finishing wall surface with 1mm thick wall care putty complete all as specified and directed.

M&L Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L Preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified and directed.

M&L Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified.

M&L complete removal of existing treatment of walls and applying two coats of oil bound distemper, over a coat of primer after finishing wall surface with 1mm thick wall care putty, complete all as specified and as directed.

M&L washing rubbing down and stopping of cement based painted surfaces and applying one coat of cement based paint on wall surfaces including proper curing complete all as specified and directed.

M&L complete removal of existing treatment and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/10 sq m over and including priming coat of exterior primer @ 0.90 litre/10sqm over new surfaces complete all as specified and directed.

M&L preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices complete all as specified and directed.

M&L preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling including cornices all as specified and directed.

M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Preparing old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC concealed conduit /surface conduit with all accessories if require such as bends, reducers, spacers, saddles, junction boxes, Bakelite sheets, wooden rectangular boards/round blocks (for housing lamp holder and light fittings etc) and MS pressed steel/cast iron sunken boxes( minimum thickness 1.2mm) of suitable size for mounting switches/bell pushes/sockets/fan regulator etc covered with new 3 mm thick laminated Bakelite sheet top cover including continuous earth wire of size 1.5 Sqmm unsheathed stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch 6 Amp.

(b) One 3 pin socket outlet 5/6 Amp on the same board controlled by one single pole one way switch 6A.

(c) One 5/6 Amp socket outlet independent controlled by one single pole 6 Amp switch.

All as per Srl Item No 128 here-in-before but one three pin 6/16 Amps socket outlet on the independent board with 2.5 Sqmm PVC insulated copper conductor and 2.5 sqmm copper conductor for continuous earthing complete all as specified and directed.

All as per item No 129 here-in-before but existing conduit and existing MS pressed steel/ cast iron box complete all as specified and directed. (a) One light point/fan/bell point controlled by one single pole one way switch 6 Amp.

(b) One light point controlled by two 2-way switches 6 A, with cables 1.5 sq. mm size

(c) One 6 Amps socket outlet independent controlled by one single pole 6 Amp switch.

S&F new MS pressed steel/cast iron sunken boxes rectangular block in replacement of old rusted sunken box. The MS Pressed Steel/ CI Box shall be galvanised or painted black with two coats of black bituminous paints or any other paint as indicated .The MS pressed steel/cast iron sunken boxes should be suitable for mounting of normal/modular switches, sockets, fan regulator etc and the item rate quoted also including making good the disturbed surfaces to match with the existing surface. The new MS pressed steel/cast iron sunken boxes suold be of following sizes with suitable thickness as per IS Code. (a) 8" x 5" and Suitable for Main switch board

All as per Srl item No 135 here-in-before of size 5"x5" and suitable for 05 Amp Independent board.

S&F bakelite sheet hylam 3mm thick of white top fixed with cup washers, machine screws on new/existing MS Shuken box including removing existing switch/ switch sockets/ bell push etc and refixing the only serviceable switchs/socket by making slots on new sheet complete all as specified & directed. (a) Min size 8'' x 5" and Suitable for 15 Amp Independent board.

All as per Srl Item No 137 here-in-before of min size 5'' x 5" and suitable for 05 Amp Independent board.

S&F Modular switch 6 Amp 2 way 1 module size complete all as specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F Modular Switch one way 6 A, 1 module complete all as specified and directed. Makes - Precision/Anchor/Havells/Legrand.

S&F Modular Switch one way 16 A, 1 module complete all as specified and directed. Make - Precision/Anchor/Havells/Legrand

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. Make - Precision/Anchor/Havells/Legrand

S&F Modular Socket, 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. Make - Precision/Anchor/Havells/Legrand

S&F Modular Dummy plate complete all as specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F Modular white cover plate including GI box inner, 3 module complete all as specified & directed. Makes : Precision/Anchor/Havells/Legrand

S&F Modular white cover plate including GI box inner, 4 module complete all as specified & directed. Makes : Precision/Anchor/Havells/Legrand

S&F Modular white cover plate including GI box inner, 8 module complete all as specified &directed. Makes : Precision/Anchor/Havells/Legrand

S&F Modular step type regulator,120 W - 2 module complete all as specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F Modular bell push piano flush type 6 Amps 1 module duly ISI marked complete all as specified and directed. Makes - Precision/Anchor/Havells/Legrand

S&F bell ding dong AC 230 volts single pole complete all as specified and directed.

S&F Switch piano flush type 6 Amps, one way complete all as specified and directed.

S&F Switch piano flush type 16 Amps, one way complete all as specified and directed.

S&F Socket outlet 3 pin, 6 Amps, piano flush type complete all as specified and directed.

S&F Socket outlet, 2 in 1, 6 pin 6 and 16 Amps piano flush type complete all as specified and directed.

S&F Switch piano flush type 6 Amps, two way complete all as specified and directed.

S&F in repair Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminals complete all as specified and directed.

S&F in lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.

S&F Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb omplete all as specified and directed.

S&F LED tube light fitting 18 Watts,4 feet long decorative ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F LED Mirror light 7 Watt 2 ft adjustable type enegy saving curve type complete all as specified and direceted.

S&F LED Wall bracket light 8 Watt decorative type (Warm white) enegy saving including 8 W LED Bulb complete all as specified and directed.

Supply Installation commissioning & testing of water heater storage type electric capacity 25 liter, BEE 5 Star rated complete with all accessoriessuch as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed. Makes of electric Storage water Heater : Monza DX Cat Part No GHWAMGTWH025 of make "Havells" or techno-commercially equivalent in approved makes.

S&F LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F in repair stepped type electronic fan regulater (Socket/switch type), flush type on the existing phenolic laminated sheet etc. as reqd complete all as specifed and directed.

S&F in repair bell push piano flush type 6 Amps single pole complete all as specified and directed.

S&F in repair bell AC 230 volts single pole complete all as specified and directed.

S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 6 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.

S&F MCCB 4 pole, 415 volts, 100 Amps, 36 kA, 50 Hz complete all as specified and directed.

S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 4 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.

S&F in repair sheet metal enclouser DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.

S&F MCB SPN, 40A - 63Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning complete all as specified and directed.

S&F MCB SP, 40 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning complete all as specified and directed.

S&F modular type AC motor starter 25 Amps 230 volts Two module complete all as specified and directed. Makes : Havells Cat Part No AHFSMXW251 or techno-commercially equivalent in approved makes.

S&F modular type 10 A / 25 A shuttered socket, 230 volts Two module complete all as specified and directed. Makes : Havells Cat Part No AHFKCXW253 or techno-commercially equivalent in approved makes.

S&F in repair MCB single pole neutral (SPN) 240 volts, 20 to 40 Amps, 10 KA complete all as specified and directed.

S&F MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

S&F in repair LED tube light fitting 1 X 20 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Makes: Cat Part No LHEXBLP7PN1W020 of make "Havells" or techno-commercially equivalent in approved makes.

S&F MCB TPN 415 volts 63 Amps, 10 KA breaking capacity complete all as specified and directed.

Taking out existing unserviceable fan motor from the Exhuast Fan of Size 300 mm Steel body and supply fixing and connecting new fan motor Suitable for 300 m Ex Fan with capcitor and nut and boult, RPM 1400, 230 Volt 50 C/s single phase complete including MS clamps and rubber pad , Fan Blade complete all as specified and directed.

M&L Cutting holes into or through brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete and making good complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.

S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified and directed.

S&F in repair sub main wiring of 6 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 6.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia complete all as specified and directed. Note:-Two run of single core 6 sqmm cable and one run single core 6.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).

All as per Srl Item No 184 here-in-before but of 4 Sqmm submain wiring.

M&L earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm & 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) complete all as specified and directed.

S&F sheet steel metal enclosure single pole & neutral with a 2 pin and earth plug and socket complete with one single pole MCB SP 20 Amp, 240 volts complete all as specified and directed.

Supply and laying cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling, including spreading, levelling, watering and well ramming in layrs not exceeding 25cmin soft/loose soil complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50m and dpositing where directed at a level not exc. 1.5m above the starting point complete all as specified and as directed.

M&L bricks common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise acrose the line of cable in trenches for protection of underground cable complete all as specified and directed.

S&F Mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc as required complete all as specified and directed.

Karan Engineers (BID ID -3482192)

KAILASH CONSTRUCTION COMPANY (BID ID -3482394)

ABHISHEK AND COMPANY (BID ID -3481968)

RAKESH KUMAR SATISH KUMAR (BID ID -3482252)

M/s Sarup Singh (BID ID -3482329)

G D TRADERS (BID ID -3481400)

V R TRADERS (BID ID -3481989)

RAJINDRA AIR CONDITINOR FABRICATORS (BID ID -3482125)