Construction of sanitary and plumbing for excellency main building expert residence and trainees hostel and rooftreatment at sea buck thorn centre for excellence at nimoo

Amount

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: W.C. pan with lSI marked black solid plastic seat and lid.

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap,10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings C.I/M.S bracket 32mm diameter flush bend and bracket cutting and making good the wall and floor wherever required . Orrisa pattern white vitreous china W.C pan of size 580 mm

Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P brass pillar taps, kingstone/gem / Techno/ Parko / Jaguar / Escko, 32 mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls. Wash basin size 55ox 400 mm with a pair of 15mm C.P brass pillar taps.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception , of pipes and fittings.

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing kitchen sink as per I.S 13983 with CI bracket and stainless steel plug 40 mm including painting of fitting , cutting and macking good the wall wherever required kitchen sink without drain board 610x 460 bowl 200 mm.

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour:Waste coupling 38mm of 83 mm length not less than 60gms.

Providing and fixing CP brass towel rail complete with brackets fixed to wooden cleats woth CP brass screws with CP brass screws with concealed fitting arangement of approved quality colour and making ( prayag or equivalent) 600 mm long towel rail with total length of 646 width , 78 mm wide and effective high of 88mm , weighing not less than 190 gms.

Providing and fixing soap dish of C.P brass toilet paper holder. C.P. Brass.

Providing and fixing soap dish of C.P brass and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make , weight not less than 105gms ( prayag or equivalent)

Providing and fixing PVC pipe confirming to IS. 4985 ( class - IV ) with all injection moulded fittings viz: elbows , tees, etc jointed with solvent cement, cutting chase and making good the wall in all respect for waste connections: a ) PVC 100 mm @ 6 Kg /rm

b ) PVC 75 mm @ 6 Kg/ rm

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete: a ) 100 mm

Providing and fixing collar 75mm.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100 mm inlet and 75 mm outlet.

Providing and fixing 100mm sand PVC grating for gully, floor or nahani trap.

Providing and fixing P trap for English type W.C with washer and M.S claps complete job.

Providing and fixing double equal plain junction of required degree a ) 75 x75 x 75 PVC as per .

b ) 100 x 100 x 100 PVC as per

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropytene random fitings 1/C fixing the pipe with clamps at 1.00m spacing. This includes testing of joints complete as per direction of Engineer-in-charge. ( concealed work including cutting chases and making good the walls etc) a ) 15mm dia nominal bore.

b) 32mm dia nominal bore .

Providing and fixing C.P brass shower rose with 15 or 20 mm inlet. 100 mm dia nominal bore .

Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931. 15mm nominal bore

Providing and fixing C.P brass long body bib cock of approved quality conforming to IS standard and weighting not less than 690 gms.

Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 . 15mm nominal bore .

Providing and fixing C.P brass closed hole basin mixer piller tap of approved quality anf make , weight not less than 1.970 kg.

Constructing masonry chamber 30x 30x 50cm, inside with 75 class designation brick solid work in cement mortar 1:5 ( 1cement : 5 fine sand) for fullway valve / stop cock, with C.I surface box 100x 100x 75mm ( inside ) with hinged CI cove / lid fixed in cement concrete slab 1 with F. P.S brick / solid block ( crushed aggregrates)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license]. PVC storage tank.

Making connection of PPR distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc complete 20 to 32 mm nominal bore.

Providing and fixing PVC gate valve with complete job. 32 mm dia. Pipe.

Providing and fixing C.P wall mixer of approved quality conforming to I.S standards and weighning not less than 810 gms. 15mm nominal bore.

Construction of septic with 150 mm thick RCC 1:1 1/2:3 base floor over plain cement concrete base 75mm thick in 1:3:6 . 75 mm to 25mm C.C. screed in floor ( laid to slope ) in 1: 2:4 . 60 mm thick R.C.C baffle walls , inside tank plastered with cement mortar 1:2 ( 12mm to 15mm thick ) admixed with water proffing compound in recommended proprotion, 125 mm thick RCC cover slab in 1: 2:4 including rendering, finishing , excavation of foundation , re- filling in trenches all completeed with 2 Nos. 450x 600 mm light duty C. I cover and frame, vent pipe and 150 mm S.W tee all as per direction of engineer and standard drawing / design. Size 2300 x 1100 x 1300 mm ( Liquid depth)

Making soak pit 2.5 m diameter 3.0 deep with 45x 45 cm dry RR stone masonary with lintle band at two stage including slab also and S.W drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

10cm thick ( average ) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35 kg per cum of earth and gobri leaping with bhusa at 35 kg per cum of earth and gobri leaping with mix 1:1 ( 1 clay : 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 ( 1 cement : 3 fine sand ) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. With Hand moulded F.P.S brick tiles.

Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size)

M/S RIGZIN ANGCHOK

M/S SHAUKAT ALI