work for Replacement of 150/200mm dia SW line Realignment of 230 mm dia SW sewer line and Construction of machine holes in ward no 14, 18th cross MEI layout near blossom school towards 5th main MEI layout coming under MEI Layout 1 Service station area of AEENW-3 Sub-division

work for Replacement of 150/200mm dia SW line Realignment of 230 mm dia SW sewer line and Construction of machine holes in ward no 14, 18th cross MEI layout near blossom school towards 5th main MEI layout coming under MEI Layout 1 Service station area of AEENW-3 Sub-division

Dismantling of Flexible Pavements.Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately.By Mechanical Means.Bituminous ...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Depth exceeding 1.5m, but not exceeding 3 m

Depth exceeding 3.0 m, but not exceeding 4.50 m

Providing lowering laying, jointing, testing and commissioning of following diameters glazed stone ware pipes, conforming to IS 651:1992, (with 5th revision) in all respects jointing with EPDM rubber ...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work

Wet Mix Macadam (Plant Mix Method).Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...

Prime Coat over Stabilised Soil base / Crusher Run Macadam.Providing and applying primer coat with SS1 grade Bituminous Emulsion on prepared surface of granular Base including cleaning with mechanical...

Bituminous Macadam Grading - I for traffic is less than 20 MSA Providing and laying Bituminous Macadam with 100 tph capacity hot mix plant batch type using crushed aggregates of specified grading prem...

Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned w...

Bituminous Concrete Grading I for traffic is less than 20 MSA.Providing and laying Bituminous Concrete with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, pre...

Dismantling the damaged or collapsed Machinehole ,conical in shape, and reconstructing the same for the same dimensions, with machine made wire cut brick in CM 1:4 with ordinary portland cement etc. a...

Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster ...

For every additional 0.1m depth(1.0m to 2.0m depth)

Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. & 2.0 M depth includ. SFRC F&C

For every additional 0.1m depth(2.0m to 3.0m depth)

Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. & 3.0 M depth includ. SFRC F&C

For every additional 0.1m depth(3.0m to 4.0m depth)

Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. & 4.0 M depth includ. SFRC F&C

For every additional 0.1m depth(4.0m to 5.0m depth)