COMPLETION OF BALANCE WORK OF TOILET BLOCK AT

Amount

Taking down Chowkhats or frames not exc. 1.5 sq. m with shutters (without taking off shutters from the frames), complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work/stone boulder built in cement mortar or cement lime mortar, complete all as specified and directed by Engineer-in-Charge.

M&L demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed by Engineer-in-Charge.

BLANK

Taking up or down steel tubing/PPR pipe and connections 15mm bore pipe, complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 6.00 here-in-before but 20mm bore pipe, complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including cutting grooves and making good in CM (1:3) or PCC (1:2:4) for concealed tubing, complete all as specified and directed by Engineer-in-Charge. Make : Tata/Jindal/Prakash

All as per Srl item No. 7.00 here-in-before but 20mm dia.

All as per Srl item No. 7.00 here-in-before but 20mm dia( except GI pipe)( The GI Pipe shall be supplied under Sch 'B' free of cost)

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and directed by Engineer-in-Charge.

M&L brick works with fly ash bricks straight or curve on plan exc 6m mean radius built in CM (1:6), complete all as specified and directed by Engineer-in-Charge.

M&L rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

M&L for anodised aluminium frame (minimum 50 micron powder coating) for doors, windows, and ventilators with one or more rebates including cleat for fixing etc, complete all as specified and directed by Engineer-in-Charge.

M&L for powder coated aluminium shutter window (glazed shutter) and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.85 kg/m (Min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 150mm long peg stays (1 No. on each shutter), hinges type B-21 100mm long (2 Nos each shutter, 100mm long handle on each shutter, 75mm long tower botl (2 Nos) on each shutter etc., complete all as specified and directed by Engineer-in-Charge. Note : Glass shall be measured and paid separately under relevant item of this Schedule as supply only.

Supply only 5mm thick figured glass pih head type etc. exceeding 0.50 Sqm in each pane

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern (grill size 100mm x 100mm, thickness not less than 5.00 mm), with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).

M& L for 10 mm above Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing cracking, bending soirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securong with clips complete all as specifed and directed.

M& L for 6 to 8 mm Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing cracking, bending soirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securong with clips complete all as specifed and directed.

M& L for 5 to 10 mm in striuups Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing cracking, bending soirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securong with clips complete all as specifed and directed.

Providing and laying in position site batched design mix cement concrete for reinforced cement concrete RCC, M-25 (20mm graded Aggregates) beams, cantilevers, bressumers, lintel over 1.5 mt span work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement complete all as specifed and directed. NOTE:- The design mix shall got done by any govt approved lab and approved by GE befor incorporation in work, the quoted rate shall be inclusive of the same.

Providing and laying in position site batched design mix cement concrete for reinforced cement concrete RCC, M-25 (20mm graded Aggregates) slabs supported on walls, beams and column in floors, roof, landings, balconies, canopies, deck slabs and in shelves and the like work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge. NOTE:- The design mix shall got done by any govt approved lab and approved by GE befor incorporation in work, the quoted rate shall be inclusive of the same.

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete RCC, M-25 (20mm graded Aggregates) chajjas work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge. NOTE:- The design mix shall got done by any govt approved lab and approved by GE befor incorporation in work, the quoted rate shall be inclusive of the same.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and as directed by Engr-in-Charge.

M&L for formwork to soffit of suspended slab such as roof slab not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces of concrete, complete all as specified and directed by Engr-in-Charge.

M&L form work to chullah hoods, chajjas, troughs and similar items including edges in falt for rough finished surface of concrete, complete all as specified and as directed by Engr-in-Charge.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. including necessary scaffolding upto 4th floor, complete all as specified and directed Make : Asian Paints (Apex Ultima)/ Berger Paint (weather coat all guard)/Nerolac (Excel Mica Marble)

M&L for removing excavated/dismantled material n exc 100m and depositing where directed at a level n exc 1.5m above the starting point, complete all as specified and directed by Engr-in-Charge.

S&F Fiber glass Reinforced Plastic (FRP) Door Frames three lagged of cross section 90 mm x 45 mm single rebate, laminate door frame molded with fire retardant grade unsaturated polyester resin and chopped mat, Door frame laminate 2 to 3 mm thick and filled with suitable wooden block in all the three legs, frame covered with fiber glass from all sides, MS stay at the bottom to steady the frame. Including 08 nos, 150mm long GI fastener for fixing of each frame complete all as specified and directed by Engr-in-Charge.

S&F Fibre glass reinforced plastic (FRP) Door Shutter 30mm thick panelled door shutter of approved colour, made with fire retardant grade unsaturated polyester resin molded to 3 to 5mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels and conforming to IS 14856-2000, complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel barrel tower bolts, stove enamelled with bright bolts and fixed 150mm long bolts, complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel handles oval type125mm size, complete all as specified and directed by Engineer-in-Charge.

S&F 75 mm butt hinges extruded brass, with mild steel hing pin ,bright polished and fixed, type B-11, complete all as specified and directed by Engineer-in-Charge.

M&L for 18 to 20mm thick Granite work (table rubbed and polished ) of Lakha Red or Telephone Black colour to shelves, counter slabs, floors & skirting etc. over and including 15mm thick screed/rendering in CM (1:4) and pointing with white cement (mixed with suitable colour) (1:2)using marble dust with admixture of pigment to match with shade of granite including moulding edges of granite, complete all as specified and as directed by Engr-in-charge.

S&F in repairs 32mm brass chromium plate bottle traps for wash basins/urinals with inlet and outlet screwed for pipe of connections including necessary packing union and cap, complete all as specified and directed by Engineer-in-Charge Make : Parko/Gem/Zim/Jaquar

S&F 100mm size cast iron floor trap with grating including jointing to waste pipe in CM type B1 (1:2:4), complete all as specified and directed by Engineer-in-Charge.

M&L for 40mm PVC pipe laid in floor or fixed in wall including necessary cutting, and making good with PCC 1:2:4 or in CM 1:4 , complete all as specified and directed by Engineer-in-Charge. Make :Prince/Reliance/Finolex/Supreme/Kisan

S&F for 100mm bor spun cast iron soil, waste and vent pipes (ISI marked) in any length with ears with lead joints fixed to walls and floor including cutting, chasing in wall/floor and making good with PCC 1:2:4 type B1, complete all as specified and directed by Engr-in-charge.

BLANK

BLANK

S&F waterless urinal kit-odour control system, complete all as specified and directed by Engineer-in-Charge. Make: Ekam Eco Solution Pvt Ltd./Hindware/Uridan Urinal/Kohler/Falcon waterfree products

S&F in repair wash down water closet (pedestal pattern) of any colour including fixing of bolts and seat cover, complete all as specified and directed by Engineer-in-Charge. Make:- Hindware/Cera/Parryware

S&F in repair for vitreous china wash basin white flat back size 550x400 including cutting for and pinning in ends of brackets including of fixing of 32 mm low density polylethyne pipes (LDPE) of pressure rating 6kg/cm2, coupling ,PVC connection with 15 mm PTMTcheknuts ,brackets, complete all as specified and directed by Engineer-in-Charge. Make: Hindware/Cera / Parryware

M&L for glazed ceramic colour designer concept tiles 300x600x7mm size set and jointed in neat cement slurry over and including 10mm thick backing/rendering coat in cement mortar (1:3) and pointed in white cement with pigment with colour of tiles as in skirting dado etc including demolition of tiles and backing coat, complete all as specified and as directed by Engr-in-Charge. Make:Kajaria/Somany/Johnson

Laying only for glazed ceramic colour designer concept tiles 300x600x7mm size set and jointed in neat cement slurry over and including 10mm thick backing/rendering coat in cement mortar (1:3) and pointed in white cement with pigment with colour of tiles as in skirting dado etc including demolition of tiles and backing coat, complete all as specified and as directed by Engr-in-Charge. (The tile shall be provided free for fixing under Sch 'B' stores)

M&L for joint free non skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 15 mm thick screed bed in cement mortar in (1:6) and including dismantling of walls tiles including cement mortar backing coat, complete all as specified and as directed by Engr-in-charge. Make: Jhonson/Kajaria/Somany

S&F in repair for vitreous china ware counter mounted wash basin Mini Oval Size (LxW):( 0.49 x 0.36) cm including cutting and moulding for and pinning in ends of brackets including 32 mm low density polylethyne pipes (LDPE) of pressure rating 6kg/cm2,cupling ,PVC connection with 15 mm PTMT cheknuts ,brackets all complete as directed by Engr in Charge. Make: Hindware/Cera / Parryware

S&F in repairs 10ltr capacity PVC valve less syphonic action type flushing cistern low level white with inlet ball valve ,float & handle including brackets, complete all as specified and directed by Engineer-in-Charge. Make: Hindware/Parryware/Cera/Johnson Padder/Commander

S&F in repair for long body bib taps 15mm bore (for iron pipe) cast copper alloy fancy type chromium plated butter fly handle screwed down, complete all as specified and directed by Engineer-in-Charge. Make: Marc/Jaquar/GEM/Parko/Zim

S&F 2 in 1 angle stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends, complete all as specified and directed by Engineer-in-Charge. Make: Marc/Jaquar/GEM/Parko/Zim

S&F in repairs for angle stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends, complete all as specified and directed by Engineer-in-Charge. Make: Marc/Jaquar/GEM/Parko/Zim

S&F in repairs of swan neck pillar tap 15mm bore cast copper alloy wit cap capstan chromium plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe, complete all as specified and directed by Engineer-in-Charge. Make: Marc/Jaquar/GEM/Parko/Zim

S&F in repairs 45cms long PVC connection with PTMT nuts and suitable for 15mm bore GI Pipe , complete all as specified and directed by Engineer-in-Charge. Make : Prayag/symat /Polytuf

S& F triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) and providing all necessary fittings for connecting with pipe line including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed by Engineer-in-Charge. Make: Sintex/Polycon/Rotex/SPL/Diplast

S&F SS health faucet with 1.0 mtr long tube, complete all as specified and directed by Engineer-in-Charge. Make: Marc/Jaquar/GEM/Parko/Zim

S&F fancy towel ring, complete all as specified and directed by Engineer-in-Charge. Make: Marc/Jaquar/GEM/Parko/Z

S&F SS fancy type soap dispenser, complete all as specified and directed by Engineer-in-Charge. Make: Marc/Jaquar/GEM/Parko/Zim

S&F SS paper holder, complete all as specified and directed by Engineer-in-Charge. Make: Marc/Jaquar/GEM/Parko/Zim

M&L rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement including taking down cement plaster on concrete, brick surface and raking out joints, hacking for key, scrubbing down with water to receive plaster, complete all as specified and directed by Engineer-in-Charge.

M&L rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement including taking down cement plaster on concrete, brick surface and raking out joints, hacking for key, scrubbing down with water to receive plaster, complete all as specified and directed by Engineer-in-Charge.

M&L rendering 10mm thick in CM 1:3 on fair faces of ceiling surfaces finished even & smooth without using extra cement incl taking down cement plaster on concrete surface and raking out joints, hacking for key scrubbing down with water to receive plaster, complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of oil bound distemper over a coat of primer on wall surface with approved colour and shade including preparation of surfaces, complete as specified and directed by Engineer-in Charge. Make : Asian Paints(Tractor)/Berger paints (Bison Super)

M&L for applying two coats of distemper, white or tinted on ceiling surface of any description including preparation of surfaces, complete all as specified and directed by Engineer-in-Charge. Make : M/s Asian Paints/ M/s Berger Paints / M/s Shalimar

S&F 12mm thick rough toughned partition for urinal partition of size 350 x 800 mm.including necessary SS bracket for fixing of glass, complete all as specified and directed by Engineer-in-Charge.

M&L Salt glazed stoneware drain pipes 150mm internal dia laid in trenches and jointed, complete all as specified and directed by Engineer-in-Charge.

M&L cement concrete bed (1:4:8) type D2 using 40mm graded aggregate to drain pipes 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed by Engineer-in-Charge.

S&F in repair grating 100 mm dia of PTMT (min weight 25 grm), complete all as specified and directed by Engineer-in-Charge.

BLANK

M&L for providing and making fillet of 75mmx75mm in size with cement concrete in 1:2:4 type B-2 (using 40mm graded stone aggregate) complete in sunken portion, complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of Dr Fixit Pidicrete URP on prepared surface of concrete/plaster all as per manufacturer's instructions and as directed by Engineer-in-Charge.

M&L for cement concete 50mm thick 1:2:4 type B-2 (40mm graded stone aggregate) mixed with Dr Fixit Pidiproof LW+ (Liquid WPC) in sunken portion all as per manufacturer's instruction directed by Engineer-in-Charge. Note : WPC Fixit Pidiproof LW+ shall be deemed to be included in unit rate quoted.

M&L 75 mm thick PCC 1:3:6 type C2 (40 mm graded stone aggregate) as in sub base , complete all as specified and directed by Engineer-in-Charge.

M&L for refilling 250mm thick lime concrete 1:3:6 using brick aggregate in sunken portion, complete all as specified and directed by Engineer-in-Charge.

M&L for 20mm thick cement mortar plaster CM 1:4 mixed with Dr Fixit Pidiproof LW+ as per manufacturer's instruction directed by Engineer-in-Charge. Note : WPC Pidiproof LW+ shall be deemed to be included in unit rate quoted.

S&F 25mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including cutting grooves and making good in CM (1:3) or PCC (1:2:4) for concealed tubing, complete all as specified and directed by Engineer-in-Charge. Make : Tata/Jindal/Parkash

M&L brick work with sub class 'B' (old size) straight of curved on plan to any radius built in half brick wall using CM 1:4, complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge.

S&F vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including CI 'P' traps, complete all as specified and directed by Engineer-in-Charge. Make: Hindware/Cera/Parryware

M&L for formwork to fair finished sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; lintel beam,slab,column and similar work; vertical or to batter, complete all as specified and directed by Engineer-in-Charge.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surfaces of concrete, complete all as specified and as directed by Engr-in-Charge.

M&L for reinforced cement concrete (design mix ) M25 in foundations, including rafts, footings, foundation beams, plinth beams, bases for column, lintel beam,slab,roof beam etc, under-reamed piles and mass concrete, complete all as specified and directed by Engineer-in-Charge.

M&L for RCC M-25 (Design Mix), using 20mm graded stone crushed aggregate in columns, pillars, piers, posts and struts, complete all as specified and directed by Engr-in-Charge.

M&L for Cement concrete in foundations, filling and mass concrete type D2 1:4:8 (40mm graded stone aggregate), complete all as specified and directed by Engr-in-charge.

M&L for washed stone grit plaster on exterior walls in two layers , under layer 12 mm thick cement plaster 1:4 (1 cement : 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre ,top layer 15mm thick cement plaster 1:2 ( 1 white cement :2 stone chipping 8 to 10 mm nominal size ) in panels (size of Panels 1.0 sqm) with aluminium beading groove (size of aluminium beading 10mmx12mm) all around as per approved pattern including scrubbing and washing , the top layer with brushes and water to expose the stone chippings, complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic colour designer concept tiles 300x600x7mm size set and jointed in neat cement slurry over and including 10mm thick backing/rendering coat in cement mortar (1:3) and pointed in white cement with pigment with colour of tiles as in skirting dado etc, complete all as specified and as directed by Engr-in-Charge. Make:Kajaria/Somany/Johnson

M&L for joint free non skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 15 mm thick screed bed in cement mortar in (1:6), complete all as specified and as directed by Engr-in-charge. Make: Jhonson/Kajaria/Somany

S&F vitreous china ware counter wash basin Mini Oval Size (LxW):( 0.49 x 0.36) cm including cutting and moulding for and pinning in ends of brackets including of fixing of 32 mm low density polylethyne pipes (LDPE) of pressure rating 6kg/cm2 coupling ,PVC connection with 15 mm PTMTcheknuts ,brackets, complete all as specified and directed by Engineer-in-Charge. Make: Hindware/Cera / Parryware

S&F 10ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve ,float & handle including brackets, complete all as specified and directed by Engineer-in-Charge. Make:- Hindware/ Parryware/ Cera/Johnson Padder/ Commander

S&F fancy type long body bib taps 15mm bore (for iron pipe) cast copper alloy fancy type chormium plated butter fly handle screwed down, complete all as specified and directed by Engineer-in-Charge. Make:- Marc/Jaquar/GEM/Parko/Zim

S&F angle stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends, complete all as specified and directed by Engineer-in-Charge. Make:- Marc/Jaquar/GEM/Parko/Zim

S&F fancy type basin/wall mixer 15mm bore dia cast copper alloy with cap capstan chromim plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe, complete all as specified and directed by Engineer-in-Charge. Make:- Marc/Jaquar/GEM/Parko/Zim

S&F 45cms long PVC connection with PTMT nuts and suitable for 15mm bore GI Pipe , complete all as specified and directed by Engineer-in-Charge. Make : Prayag/symat /Polytuf

S&F grating 100mm dia of PTMT (Minimum weight 25 gms), complete all as specified and directed by Engineer-in-Charge.

S&F fancy type SS 6 point peg hook, complete all as specified and directed by Engineer-in-Charge. Make: Cosec/Parryware/Hindware/

M&L rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement including water proofing compound as per manufacturer's instruction, complete all as specified and directed by Engineer-in-Charge. Note : Water proofing compound shall be measured and paid separately under relevant items as supply only here-in-after.

Supply only liquid water proofing compound, complete all as specified and directed by Engineer-in-Charge.

S&F stairs (framed) including stringers,treades landing,balusters,hand rails,etc including cleats, brackets etc conforming to Fe 410-W (Gde E-250) quality 'B', complete all as specified and directed by Engineer-in-Charge.

M&L for treating the backfill in contact with foundation at the rate of 7.5 liters of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured), complete all as specified and directed by Engineer-in-Charge.

M&L for treating the bottom and sides of excavation at the rate of 5 liters of emulsion per square metre of surface area, complete all as specified and directed by Engineer-in-Charge.

M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and directed by Engr-in-Charge.

M&L for treating soil under plinth protection at the rate of 5 litres of emulsion per square metre of vertical surface (area of substructure in contact with backfill to be measured) complete all as specified and directed by Engr-in-Charge.

M&L for treating soil along with external perimeter of building at the rate of 2.5 litres of emulsion per metre of wall, complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded aggregate as sub base of floor, complete all as specified and directed by Engr-in-Charge.

M&L for cutting into existing manholes for connecting new drains of 150 mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and directed by Engr-in- Charge.

M&L for water proofing treatment with Polymeric APP (Atatic Poly Propylene) modified membrane weighing not less than 3.00 Kg/Sqm of thickness not less than 3mm on throughly cleaned surface of roof and applied with bituminous based primer conforming to IS 3384 @ 0.30 Kg/Sqm evenly on roof surface with torch application as per manufacturer's instruction and a coat of hot blown bitumen conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm applied over polymeric membrane and blinded with clean dry sand @ 0.50 Kg/Sqm, complete all as specified and directed by Engr-in- Charge.

M&L for rendering 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces of walls, finished even & smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L cement concrete tiles 25cm x 25cm x 22cm thick with grey cement, machine pressed, se, jointed and pointed in neat, cement slurry in floors and cut and polished over and including 20mm thick bed screed bed in CM (1:4), complete all as specified and directed by Engr-in-Charge.

M&L for broken stone hard core of gauge n-exc 63mm deposited, spread and levelled in layers n-exc 15cm thick, watered and rammed to a true surface, complete all as specified and directed by Engineer-in-Charge.

M&L for dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc, complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing/PPR Pipe and connections 32mm bore pipe, complete all as specified and directed by Engineer-in-Charge.

BLANK

Dismantling of CI pipe 100mm dia, complete all as specified and directed by Engineer-in-Charge.

M&L for dismantling of ACP sheet partition and doors , complete all as specified and directed by Engineer-in-Charge.

Taking down old 15mm dia old bib taps

Taking down old 15mm dia old pillar taps, complete all as specified and directed by Engineer-in-Charge.

Taking down old 15mm dia old shower

Taking down old 15mm dia old stop cock, complete all as specified and directed by Engineer-in-Charge.

Taking down old wash basin, complete all as specified and directed by Engineer-in-Charge.

Taking down old PVC flushing cistern, complete all as specified and directed by Engineer-in-Charge.

Dismantling of Orissa pattern water closet, complete all as specified and directed by Engineer-in-Charge.

BLANK

Taking down of float valve,, complete all as specified and directed by Engineer-in-Charge.

M&L for taking down and refixing of water tank of capacity exc 500 Ltrs not exc 1000 Ltrs including all necessary GI fitting and cleaning, complete all as specified and directed by Engineer-in-Charge.

Dismantling of SS structure, complete all as specified and directed by Engineer-in-Charge.

M&L for commissioning and testing of Automatic hand Dryer Voltage : 220V (50Hz-60Hz) Rated power : 1800 W Current : 4A Electric-shock safeguard Blowing rate : 100m/s Blowing Volume : 90m3/h Motor speed : 2000r/min Installation : Wall Mounted Drying Time : 10s Dry hands time : 5-7S Air speed : >15m/s Water splash proof Material : ABS. Make-Dolphy/Dyson, complete all as specified and directed by Engineer-in-Charge.

Fixing only exhaust fan metalic body sound proof 300mm size, single phase, 230 volts 900rpm complete with louvers and fixing bracket including grouting nut and bolts of suitable sizes for fixing brackets and louvers including making electrical connection with flexible cord 3 runs of single core stranded copper conductor of size min 0.50 sqmm from ceiling rose to exhaust fan including connection to earthing point , complete all as specified and directed by Engineer-in-Charge. Note: - The Exhaust Fan shall be provided under Sch 'B' free for fixing

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, etc. removing materials from site and making good disturbed surfaces of walls, floors, complete all as specified and directed by Engineer–in-Charge.

Material and labour for point wiring (concealed) in and including rigid non metallic PVC conduit, medium grade, ISI marked, 19/20 mm dia including cutting chases for sinking of conduit, boxes for concealed wiring and making good disturbed surfaces of wall/ceiling in CM 1:3 with 1.5 sq mm FRLSH PVC insulated & unsheathed, multistranded copper conductor cable, single core, 1100 volts grade, with flush type metal boxes modular type suitable for mounting modular switches, sockets, fan regulator etc with white or any other colour cover plate with brass, screws, cup washer and including FRLSH insulated and unsheathed multistranded copper conductor cable of 1.5 sqmm as in continuous earth wire connected to common earth and earth dolly as per IS specification and as specified for one light/fan point controlled by one switch, complete all as specified and directed by Engr-in-Charge. Make:- Conduit-Avon/Kalinga/Garware/Finolex/Asian Plaza. Make of Cable:-Finolex/Paragon (Elektron)/Polycab/ Plaza/Havells.

Fixing only for point wiring (concealed) in and including rigid non metallic PVC conduit, medium grade, ISI marked, 19/20 mm dia including cutting chases for sinking of conduit, boxes for concealed wiring and making good disturbed surfaces of wall/ceiling in CM 1:3 with 1.5 sq mm FRLSH PVC insulated & unsheathed, multistranded copper conductor cable, single core, 1100 volts grade, with flush type metal boxes modular type suitable for mounting modular switches, sockets, fan regulator etc with white or any other colour cover plate with brass, screws, cup washer and including FRLSH insulated and unsheathed multistranded copper conductor cable of 1.5 sqmm as in continuous earth wire connected to common earth and earth dolly as per IS specification and as specified for one light/fan point controlled by one switch, complete all as specified and directed by Engr-in-Charge. Note :- The Wire and Conduit pipe of 20 mm shll be provided under Sch'B' free for fixing

Fixing only for point wiring (concealed) in and including rigid non metallic PVC conduit, medium grade, ISI marked, 19/20 mm dia including cutting chases for sinking of conduit, boxes for concealed wiring and making good disturbed surfaces of wall/ceiling in CM 1:3 with 1.5 sq mm FRLSH PVC insulated & unsheathed, multistranded copper conductor cable, single core, 1100 volts grade, with flush type metal boxes modular type suitable for mounting modular switches, sockets, fan regulator etc with white or any other colour cover plate with brass, screws, cup washer and including FRLSH insulated and unsheathed multistranded copper conductor cable of 1.5 sqmm as in continuous earth wire connected to common earth and earth dolly as per IS specification and as specifiedfor One 3 pin 6 Amp socket outlet on independent board, complete all as specified and as directed by Engr-in-Charge. Note :- The Wire only shll be provided under Sch'B' free for fixing. The bidder shall consider the rate of Conduit pipe in the quoted rate

All as per Srl Item No. 129.00 here-in-above but for one 3 pin socket outlet 15 Amps on independent board with cables 4.0 Sqmm size and earth wire 4.0 Sqmm.

Taking down old unserviceable copper/aluminium sub main wiring (socket or power) complete including fixture and fittings, removing materials and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed by Engr-in-Charge.

M&L for sub main wiring (concealed in wall, ceiling/floor) with two runs of single core FRLS PVC insulated unsheathed 1100 volts grade multistranded copper conductor cable of size 10 sqmm and one run of single core FRLS PVC insulated unsheathed 1100 volts grade multistranded copper conductor cable of size 6 sqmm as earth continuity wire drawin in and including (to be sullied under Sch 'B' free for fixing) non metallic heavy duty PVC rigid conduit and conduit accessories of suitable dia including cutting chases for concealed conduit and making good to disturbed surface in CM 1:3, complete all as specified and directed by Engr-in-Charge. Note :- (a) Two run of 10 sqmm, one run of 6 sqmm and one run of PVC conduit shall be measured as one RM (b) The 25mm conduit pipe shall be supplied under Sch 'B' free for fixing

M&L for taking down existing tube light fitting of any type any make from ceiling rose and removing from site, complete all as specified and as directed by Engr-in-Charge.

Fixing only tube light fitting 1x20 W LED 4000K, 1144 mm diffused wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with tube and all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed by Engr-in-Charge. Make : Havells/CG/C&S/Wipro/Bajaj Note: The LED light including fittings shall be supplied under Sch 'B' free for fixing

Fixing only modular socket combined two module 2/3 pin, 6 Amps, complete all as specified and directed by Engr-in-Charge. Make : Legrand-myrius/Schneider-opale/ABB/Northwest Note: The 6 Amp socket shall be supplied under Sch 'B' free for fixing

S&F Only modular socket two module 2/3 pin, 6 Amps/16 Amps, complete all as specified and directed by Engr-in-Charge. Make : Legrand-myrius/Schneider-opale/ABB/Northwest

Fixing Only modular socket two module 2/3 pin, 6 Amps/16 Amps, complete all as specified and directed by Engr-in-Charge. Make : Legrand-myrius/Schneider-opale/ABB/Northwest Note: The 16 Amp socket shall be supplied under Sch 'B' free for fixing

Fixing only, modular switch 1 way 6 Amps 1 module, complete all as specified and as directed by Engr-in-Charge. Make : Legrand-myrius/Schneider-opale/ABB/Northwest Note: The 06 Amp Switch shall be supplied under Sch 'B' free for fixing

S&F, modular switch 1 way 16 Amps 1 module, complete all as specified and as directed by Engr-in-Charge. Make : Legrand-myrius/Schneider-opale/ABB/Northwest

Fixing only , modular switch 1 way 16 Amps 1 module, complete all as specified and as directed by Engr-in-Charge. Make : Legrand-myrius/Schneider-opale/ABB/Northwest Note: The 16 Amp Switch shall be supplied under Sch 'B' free for fixing

M&L for Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, complete all as specified and directed by Engr-in-Charge. Make : Legrand-myrius/Schneider-opale/ABB/Northwest

Fixing only for Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, complete all as specified and directed by Engr-in-Charge. Make : Legrand-myrius/Schneider-opale/ABB/Northwest Note: The Ceiling Rose shall be supplied under Sch 'B' free for fixing

Taking down MCB DB/cut out/main switch including MCBs of any size, complete all as specified and directed by Engr-in-Charge.

Fixing only for sheet metal enclosure for DB's used single pole & neutral 8 way Double door 240V, 200 Amps rated bus bar, complete all as specified and directed by Engr-in-charge. Make : L&T/ABB/Legrand/Siemens Note: The sheet metel enclosure shall be supplied under Sch 'B' free for fixing

Fixing only MCB 240 Volts SPN 06-32 Amp, 10 KA breaking capacity, complete all as specified and directed by Engr-in-charge. Make : L&T/ABB/Legrand/Siemens Note: The MCB shall be supplied under Sch 'B' free for fixing

Fixing only MCB 240 Volts SP 06-32 Amp, 10 KA breaking capacity, complete all as specified and directed by Engr-in-charge. Make : L&T/ABB/Legrand/Siemens Note: The MCB shall be supplied under Sch 'B' free for fixing

M&L for taking down MCB SP/SPN of any size or capacity all as specified and directed by Engr-in-Charge.

S&F blanking plates suitable for MCB DB's, complete all as specified and as directed by the Engineer-in-Charge.

Supply, Installation, testing and commissioning of Solar water heating system of capacity 500 LPD at 60/70 degree consisting of solar flat plate collectors (cu-cu) with ultrasonic welded fins including structural supporting frames, as per manufacturer's instructions, heat exchanger, stainless steel -304 grade hot water storage tank of 3 mm thickness (minimum) of following capacity with installation over MS/civil supports with and including isolation valves, GI piping as required insulation with PUF with nitrile and any other necessary works required to make the system functional including complete connection, complete all as specified and as directed by Engr-in-Charge. Note : PVC tanks for raw water makeup shall be measured and paid separately. Make : Racold/Surya Jyoti/Arrena/ Stellar

M&L for sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket complete with one MCB's 20 Amps SP, 240V, complete all as specified and directed by Engr-in-Charge. Make : Legrand/L&T/ABB/Siemens

Supply and laying XLPE insulated cable, armoured multi stranded heavy duty electric cable with Aluminium conductor, 1100 volts grade, cross sectional area 16 sqmm 4 core laid in and including non metallic heavy duty PVC conduit on surface with fixing clamps at every 1 meter distance, complete all as specified and as directed by Engr-in-Charge Make:- Finolex/Havells/Polycab/Nicco/Grandlay

Supply and laying GI steel tubing 50 mm bore medium grade with all fittings in trenches/walls/ceilings/ with GI fittings complete, complete all as specified and as directed by Engr-in-Charge. Make : Prakash/Jindal/Tata

All as per Srl Item No. 154.00 but 25mm bore

All as per Srl Item No. 154.00 but 20mm bore

Supply and fixing PP-R Gate Valves (Brass Insert) of 25 mm bore, complete all as specified and as directed by Engr-in-Charge. Make : SFMC/EL-Chem Polymer/Safe Industries/Wetflow

All as per Srl Item No. 157.00 here-in-before but 25mm bore

Lagging to pipes used in internal water supply or plumbing all round for 25mm bore GI tubing with 25 mm thick bonded mineral wool performed SNAPON pipe sections of density 144 Kg/Cum conforming to IS 9842, complete all as specified and directed by Engr-in-Charge

All as per Srl Item No. 159.00 here-in-before but 50mm bore

Supply, fixing and fabrication of platform made from MS angle iron work for mounting of overhead tank 1000 L capacity cross arms, bracings, supports, clamps and back plates fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint, complete all as specified and as directed by Engr-in-Charge

Fixing only storage type geyser capacity 35 Ltrs (5 star rating) with all necessary electrical connections and plumbing work with necessary NRV and safety valves etc including taking down existing geyser of any capacity from top by opening all necessary electrical and water connections and keeping in safe custody as per directions , complete all as specified and directed by Engr-in-Charge. Note: Old U/S Geysers shall be deposited with MES store yard) Make : Recold/Bajaj/Havells/Venus

Schedule of Credit

POOJA ENTERPRISES