REPAIR TO INTERNAL WATER SUPPLY UNDER GE N BIKANER AT MIL STATION BIKANER

Amount

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level complete all as specified and directed by Engr-in-Charge.

Demolition of brick or stone masonary including all necessary arches, pillars, quions etc built in cement mortar complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or conc surfaces including racking out joints hacking for key, scrubbing down with water complete all as specified and directed by Engr-in-Charge.

Dismantling PVC/cast iron pipes fixed to walls or laid in trenches in any position complete all as specified and directed by Engr-in-Charge.

Dismantling existing tanks, setting aside (or lowering if required) for repairs , ete. of capacity execeeding 250 ltrs and not exceeding 500 litres and removing to stores complete all as specified and directed by Engr-in-Charge.

Dismantling existing tanks, setting aside (or lowering if required)for repairs ete.of capacity execeeding 500 ltrs and not exceeding 1000 litres and removing to stores complete all as specified and directed by Engr-in-Charge.

Dismantling Stone slabs and tiles of any description or thickness in roof ,floors, aprons laid in cement mortar complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing 15mm bore including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing 20mm bore including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-Charge.

S&F PVC tank lid for 500/1000 ltrs capacity including all locking arrandements , nuts bolts with fixing two layered ISI marked hoisted and fixed in position all as specified in SSR Part-I complete all as spfd and directed by Eng-in-charge. (Note : Lid can be of any description such as Openable or round threaded)

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning,including disinfecting with bleaching powder etc.removing all scale and dirt etc from tanks and from mouths of circulating pipes and hoisting if required reconnecting and re-fixing in position including writing "date of cleaning" and next due date in bold capital letters exc 4 cm in height ,capacity of tanks exc. 250 Ltrs but not exc. 500 Ltrs complete all as specified and directed by Engr-in-charge) (Date of cleaning has to be marked)

Ditto as per item no-11 but 1000 ltrs tanks complete all as specified and directed by Engr-in-Charge.

S&F 500 ltr Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) two layered ISI marked hoisted and fixed in position all as specified in SSR Part-I, 500 ltr Capacity, including Ball brass valves, high pressure, with polythene float and flynut com complete all as specified and as directed by Engineer-in-Charge.

S&F 1000 ltr Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) two layered ISI marked hoisted and fixed in position all as specified in SSR Part-I, 1000 ltr Capacity, including Ball brass valves, high pressure, with polythene float and flynut com complete all as specified and as directed by Engineer-in-Charge. (Note : Make shall be Engraved and test certificate shall be provided before submitting payment )

S&F GI tank nipple 20 mm bore as in repairs complete all as specified and directed by Engr-in-Charge.

S&F GI union 15 mm bore as in repairs complete all as specified and directed by Engr-in-Charge.

S&FGI union 20 mm bore as in repairs complete all as specified and directed by Engr-in-Charge.

Pvc Plugs 15 mm complete all as specified and directed by Engr-in-Charge.

PVC plugs 20 mm complete all as specified and directed by Engr-in-Charge.

M&L for 15mm bore medium grade galvanished iron water tubing with all fittings and fixed complete to walls or laid in trenches complete all as specified and directed by Engr-in-Charge.

Ditto as per item no- 20 but fixing only complete all as specified and directed by Engr-in-Charge.

M&L for 20 mm bore medium grade galvanished iron water tubing with all fittings and fixed complete to walls or laid in trenches complete all as specified and directed by Engr-in-Charge.

Ditto as per item no- 22 but fixing only complete all as specified and directed by Engr-in-Charge.

M&L for 20 mm bore cutting existing steel tubing for alteration or addition complete all as specified and directed by Engr-in-Charge. (Each cut to be measured seperately)

S&F in repair Gun metal globe or gate valve 15 mm bore with iron wheel head, screwed both ends for iorn pipe and if reqd cutting to be made in running pipe for fixing of gate valve complete all as specified and directed by Engr-in-Charge.

S&F in repair Gun metal globe or gate valve 20 mm bore with iron wheel head, screwed both ends for iorn pipe and if reqd cutting to be made in running pipe for fixing of gate valve complete all as specified and directed by Engr-in-Charge.

S&F as in repair 20 mm bore brass valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F as in repair 15 mm bore PTMT (Paryag/equivalent) valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F as in repair 20 mm bore PTMT (Paryag/equivalent) valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule complete all as specified and directed by Engr-in-Charge.

Sensor for urinals fixed as in repairs complete all as specified and directed by Engr-in-Charge. ( Hindware , CERA,Perryware)

S&f 110mm bore PVC (SWR) pipe single socketed , in any length with rubber joints fixed to walls

S&f 110mm bore PVC (SWR) pipe bends any radius complete all as specified and directed by Engr-in-Charge.

M&L brick work with fly ash bricks straight or curved on plan to any radius built in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Jodhpur stone of roof slabs, self faced 7.5 cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for 40 mm thick flooring type, B-1 ,(1:2:4:) , using 20 mm graded crushed stone aggregate ,finished the surface even and smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.

M&L For pcc type B1(1:2:4) using 20 mm graded cushed stone agg as in coping ,benching and the like incl form work complete all as specified and directed by Engr-in-Charge.

M&L for cutting parapets walls ,kerbs or any arrangement at roof slab for providing spout of minimum 40 mm bore GI pipe and minimum length 1.00 mtr complete all as specified and directed by Engr-in-Charge.

M&L for Rendering 15mm thick cement plaster on fair faces of brick or conc. Surfaces in cement mortar 1:4,even and smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.

Supply only liquid intigral water proofing compound complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of cement based paint over a coat of alkali resistence priming paint after preparation of new or old untreated plastered surfaces complete all as specified and directed by Engr-in-Charge.

Racking out joints /pointing to brick work or brick tiles laid flat in floors surface channels roofs etc laid in cement mortar complete all as specified and directed by Engr-in-Charge.

M&L for flush pointing in cement mortar 1:4 laid flat or brick tiles in paving etc complete all as specified and directed by Engr-in-Charge.

Providing cement concerete PCC 1:2:4 type B0 in roof kerbs or mud stops rounded or chamfered on edges complete all as specified and directed by Engr-in-Charge.

BIDAWAT ENTERPRISES

M/S BUDHRAM BISHNOI

Beenu Co. Company