COMPREHENSIVE DAY TO DAY BR MAINT WORK OF CERTAIN MD ACCN JCOSOR QTRS AT DHANSINGH ENCLAVE BABU MALI ENCLAVE REPAIRREPLACEMENT OF OLD UNSV INTERNAL ELECTRICAL WIRING MCB MCCB DBs CIRCUIT WIRING ELECTRICAL FITTINGS FIXTURES AT COMPLETE AADC UNDER GEIG

(a) Complaint related to carpenter works like door easing, door repair, kitchen cup board repair, window/door wire mesh/glass pane repair, refixing of building hardware etc by deploying carpentor and mazdoor.

(b) Complaint related to plumbing works like repair/refixing of Bib tap, Stop cock, Angle cock Connection pipes, waste pipes, Flush tank, Flush pipe,Shower, Pvc tank, ball valves, towel rail ,WHB,EWC, waste coupling, Grating,Pillar tap etc.by deploying plumber and mazdoor.

(c) Complaint related to cement works like repair to floors/ wall plaster in patches/ filling of holes, tiles repairs etc. by deploying mason and mazdoor.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off premises complete all as specified and directed

M & L coloured vitrified tiles Light shade 8 to 10 mm thick (square/rectangular) polish of size 600 mm x 600 mm coloured cut to required size set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor incl 15 mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge/GE.

M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) of size 400 mm x 400 mm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.

Demolition of brickwork built in cement or cement lime mortar including all quoins, arches pillar etc complete all as specified and directed.

M&L Brick work with flyash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster, of any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface and finished even and smooth with out using extra cement complete all as specified and directed .

M&L for Complete Removal of existing treatment including preparation of old treated surface and applying Two coat of oil bound distemper over 1 mm thick wall care putty including preparation all as specified and directed.

M&L for applying two coats of oil bound distemper on wall or concrete surfaces over & including a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceilings and apply three coat of white wash complete all as specified and directed.

M & L for two coats of cement based paint over a coat of primer on new plastered surface of walls including preparation of surface complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall with complete removal of existing treatment and applying two coat of cement based paint over a coat of primer complete all as specified and directed.

M&L preparation of old painted surfaces and applying one coat of white wash on walls complete all as specified and as directed by Engr-in-Charge

M&L preparation of old painted surfaces and applying one coat of white wash but on ceiling complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of old painted surfaces and applying one coat of oil bound distemper on walls complete all as directed by Engineer-in-Charge

M&L preparation of old painted surfaces and applying one coat of cement based on walls complete all as directed by Engineer-in-Charge

M&L preparation of old decorated wooden painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge

M&L preparation of old decorated Steel painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge

Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed

Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories.) (Area not exceeding 2.00 sqm)

S & F Powder coated three track Aluminium sliding window with frame not less than 1.8 mm thick excluding aluminium grill and including 4 mm thick tinted glass, beading & necessary rubber packing, locking & opening arrangement, all fitting and fixture complete all as specified and directed.

S&F 5 to 6 mm thick aluminium grills of make "Decogrill' model DG 104 surrounded by aluminium 'C' channel with mesh size 75 X 75mm all as specified and directed.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR Part-II 2010.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement , as per specification and shown on drawing in SSR Part-II (2010).

Taking down shutter of any description area exceeding 1 sqm but n exc 2 sqm each and removing to store complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F Flush shutters 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down shutter of any description not exceeding 1 sqm each leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed

Taking down shutter of any description exceeding 1 sqm but not exceeding 2 Sqm each leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed

M&L Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F mild steel flat iron as in bands straps, supports or stays for rainwater, ventilating pipes including bolt if required, hooks (stay) heavy for large gates,hook and pintle hinges,large hasps and staples, brackets for WHB, hold fasts, wall ties, hooks for hanging fans ,cleats for securing purlins to wood trusses or rafters and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.

M&L for Cutting holes in brick walls exc half brick but not exc one brick built in cement mortor or cement lime mortor and stone walls built in lime mortor for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F 100 mm long aluminium handles cast type, anodized complete all as specified and directed

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed

S&F in repair 100 mm long aluminium anodized handles fabricated type complete all as specified and directed

S&F in repair 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F in repair 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed

S&F in repair 75 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed

S&F in repair 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) form wooden frames or stone, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3 mm thick figured glass pin headed type and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repairs 18 mm thick high density WPC solid fibre board with prelaminated PVC sheet as Kitchen cupboard and frame including taking down the old cupboard shutters and removing to store complete all as specified and directed.

S&F continuous (piano) hinges of width of flaps (when open) 30 mm, mild steel, bright finish or electrogalvanised complete all as specified and directed

S & F magnetic catcher catcher with nut and screw of mild steel bright finish all as specified and directed

S & F 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed.

S & F in repair 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed.

S & F in repair hasp and staple safety type aluminium anodised 75 mm long with mild steel hinge pin including bolt to hinge plate fixed with screw complete all as specified and directed.

S&F in repairs 15 mm dia Curtain rods, mild steel, chromium plated with fixing brackets complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, over all length of cover plate 140 mm with hard drawn steel spring fixed in door etc complete all as specified and directed.

S&F in repair single door PVC cabinet mirror of size 300 mm x 450 mm with internal shelves all as specified and directed

S & F in repair sheet Glass Shelf assembly consisting of 5.5 mm glass sheet shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long complete all as specified and directed..

Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed complete to walls, ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed complete to walls, ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed.

S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified

S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified

Making connection of PPR distrubtion bracnch with PPR main of following outer dia of pipe 16 to 40mm size by providing and fixing tee including cutting and making fusion joint etc

Taking down bib tap /wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of washer only for 15 mm bore size without replacing spindles complete all as specified and directed.

Taking down bib tap /wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of spindles for 15 mm bore size complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 15 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 20 mm bore of pipe complete all as specified and directed.

S&F in repair 15mm bore Bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repair Brass chromium plated wall mixer non-telephonic shower arrangement with connecting legs & wall flanges for 15 mm bore of pipe all as specified and directed.

S & F in repair Brass chromium plated centre hole basin mixer (Basin mixer) with pop-up waste system with 300 mm long braided hoses complete all as specified and directed.

S & F in repair Brass chromium plated Sink mixer with raised J shaped swinging spout (Wall mounted model) with connecting legs & Wall flanges complete all as specified and directed.

S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F in repair Brass Chromium plated Two-way angular stop cock for 15 mm bore complete all as specified and directed.

S&F in repair, 15 mm bore stop cock, cast copper alloy with long shank and cup (concealed type) fancy type chromium plated screwed down high pressure with crutch & butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bore stop cock, cast copper alloy screwed down high pressure with crutch & butterfly handle fancy type chromium plated screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repair pillar tap cast copper alloy with capstan head chromium plated crewed down high pressure with or without lettered hot or cold with long screwed sharks and ply nuts 15 mm dia complete all as specified and directed.

S & F in repair bottle trap chromium plated for WHB as per approved quality all as per specified and directed.

S&F in repair PVC waste pipe for WHB etc all as specified and directed.

S&F in repairs 32 mm bore dia waste coupling of (min weight 32 mm-45 gm of PTMT) (half or full threaded) etc complete all as specified and directed

S&F in repair CP grating 100 mm dia with waste hole (minimum weight 40 gm) complete all as specified and directed

S & F in repair CP Jet spray for 15 mm bore all as specified and directed.

S & F in repairs Hand shower (Health faucet) with 1 mtr long Easy flex tube in crome finish & wall hook complete all as specified and as directed by Engr-in-Charge.

M&L in repairs for vitreous china wash basin, white,flat back, size 550 x 400 mm including supply & fixing of brass chromium plated coupling 32 mm etc complete all as specified and directed.

M&L in repair Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repairs plastic water closet seat cover, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

M&L in repairs vitreous china squatting pan , ‘Orissa’ Pattern, size 580 X 440 mm white, with integral foot rests etc. complete all as specified and directed.

S & F in repair Kitchen sink made of stainless steel 1 mm thick with plug washer and waste pipe incl bedding fixing cantilever brackets and connetction union to pipe overall size 915 X 460mm bowl size 405X 355 mm complete all as specified and directed.

S& F in repair 1 mm thick stainless steel plate rack of size 900X600X200 incl fixing with rawal plug and screws complete all as specified and directed.

S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position including dismantling of old u/s water tank and removing to store complete all as specified and directed

S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in position including dismantling of old u/s water tank and removing to store complete all as specified and directed

S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S&F ball valves for 25 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 455 gms) complete all as specified and directed.

S&F in repairs ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S&F in repairs ball valves for 25 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 455 gms) complete all as specified and directed.

S & F in repair PVC Tank cover for 500 Ltr capacity fixed in position with nuts and bolt complete all as specified and directed

S & F in repair PVC Tank cover for 1000 Ltr capacity fixed in position with nuts and bolt complete all as specified and directed

Taking down & refixing PVC tank cover for 500/1000 Ltr capacity fixed in position with nuts and bolt including the cost of nuts & bolts complete all as specified and directed.

S&F in repairs, PVC valveless symphonic action type low level flushing cistern, 10 ltrs capacity with inlet, ball valve, float and handle including bracket complete all as specified and directed

S & F in repair internal fitting for low level flushing cistern (Syphon) complete all as specified and directed.

S&F in repairs flush pipe 32 mm dia of polyethylene of low or high density or PVC, for low level cistern complete all as specified and directed.

S & F in repair 125 mm dia chromium plated shower rose of with or without swivel joint incl fixing to steel pipe complete all as specified and directed.

S&F in repair PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed.

S&F in repairs CP anodised tubular tower rail, 20 mm dia, D type, 60 cm long between flanges etc.

S & F in repair 75 mm PVC(SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm bore dia of pipe complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends (ISI marked) for iron pipe of 25 mm bore dia of pipe complete all as specified and directed.

S & F in repair Soap dish any type fixed to plug with chromoium plated brass screw complete all as specified and directed.

S & F in repair corner glass shelf with brackets complete all as specified and directed.

S & F in repair double coat hook complete all as specified and directed.

S&F in repairs door seal with aluminium beading and 50 mm wide rubber seal complete fixed to aluminium/ Wooden doors complete all as specified and directed.

M&L in repairs for vitreous china wash basin, white,flat back, size 550 x 400 mm including supply & fixing of brass chromium plated coupling 32 mm etc complete all as specified and directed.

S & F Stainless Steel 12 mm dia & 75 mm long Holdfast for fixing the wash hand basin complete all as specified and directed.

M&L for Cleaning and removing all scale and dirt, etc, from RCC/PVC tanks exc 250 ltr n.exc 500 ltr capacity incl washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder @ 0.25 Kgs per tank with writing the date of cleaning with any type of paint and from mouths of circulating pipes, including Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made for conditions separately ) and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing without andulations complete all as specified and directed.( Note:- All credit materials should be deposited in MES yard as available on work site the same materials should be issued to contractor through gate pass as per contract schedule of credit materials against contract agreement or taken on ledger with approval by accepting officer).

Material and labour for cutting chasing,pinning of brick/ stone/concrete wall at any height wall cutting and chases for concealed wiring for 20/25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed

M&L for point wiring using approved colour coding incl providing circuit wiring with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conf to IS-694/1990 unsheathed, multistranded, single core, copper cable 1100 volts grade cables drawn through in PVC Conduit 20/25 mm dia medium grade ISI marked (MMS) at any height/places and all accessories are concealed in walls / roofs / floors / ceiling etc. including suitable arrangements for flush mounting modular MS/GI boxes as per site requirement/suitable for modular top cover and frame for fixing of modular switches,sockets,fan regulators, blank plate etc and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with necessary putty for smooth finishing complete all as specified and directed for the following:-

(a) One light point controlled by one 10amps switch.

(b) One fan point controlled by one switch 10 amps, and one regulator.

(c) One exhaust fan point controlled by one 10 amps switch .

(d) One 5 pin 6 amps socket point controlled by one 10 amps switch on independent board .

(e) One 5 pin 6 amps socket point controlled by one 10 amps switch on same board .

(f) One bell/buzzer point controlled by one bell push.

(g) One light point controlled by two 2 way switches/bed switch point

All as per item No. 128.04 & 128.05 above,but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm incl circuit wiring complete all as specified and directed for the following:-

(a) One 6 pin 16/6 amps socket outlet point controlled by one 16/20 amps switch on independent board.

(b) One 6 pin 16/6 amps socket outlet point controlled by one 16/20 amps switch on same board.

All as per item No.128.04 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm incl circuit wiring complete all as specified and directed.

M&L for point wiring using approved colour coding incl providing circuit wiring with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conf to IS-694/1990 unsheathed, multistranded, single core, copper cable 1100 volts grade cables drawn through PVC casing and caping 20/25 mm width double locking medium grade ISI marked (MMS) at any height and all accessories such as Tee,bend,short piece & elbow on surface on walls / roofs / floors / ceiling etc. including providing suitable arrangements for flush mounting modular MS boxes as per site requirement/suitable for modular top cover and frame for fixing of modular switches,sockets,fan regulators, blank plate etc and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with necessary putty for smooth finishing complete all as specified and directed for the following:

(a) One light point controlled by on switch

(b) One fan point controlled by one switch and regulator

(c) One exhaust fan point controlled by one switch.

(d) One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

(e) One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

(f) One bell point controlled by one bell push.

(g) One light point controlled by two 2 way switches.

All as per item No.131.04 & 131.05 above,but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm and incl providing circuit wiring complete all as specified and directed for the following:-

(a) One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on independent board.

(b) One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on same board.

All as per item No. 132.01 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm incl providing circuit wiring complete all as specified and directed.

Supply & fixing and fixing in repairs modular type switch 10 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed by Engr-in-Charge.

Supply & fixing and fixing in repairs modular type switch 10 Amps ,2way,single pole,1 module,240V,AC, ISI Marked complete all as specified and directed by Engr-in-Charge.

Supply & fixing and fixing in repairs modular type bell push 6 Amps,1 module, single pole, 240 volts,AC, ISI Marked complete all as specified and directed by Engr-in-Charge.

Supply & fixing and fixing in repairs modular type switch 16 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed by Engr-in-Charge.

Supply & fixing and fixing in repairs modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed by Engr-in-Charge.

Supply & fixing and fixing in repairs modular type socket 6 A/16 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed by Engr-in-Charge

Supply & fixing and fixing in repairs red color lighting indication lamp 6 Amps, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed by Engr-in-Charge.

Supply & fixing and fixing in repairs modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 0 to 4/5 steps, ISI Marked complete all as specified and directedby Engr-in-Charge.

Supply & fixing and fixing in repairs call bell AC, 230 Volts single pole, multi music type ISI marked, complete all as specified and directed by Engr-in-Charge.

Supply & fixing and fixing in repairs call bell ding dong AC, 230 Volts single pole, multi music type ISI marked, complete all as specified and directed.

Supply & fixing and fixing in repairs angle lamp holder, insulated body with back plate for batten fittings complete all as specified and directed by Engr-in-Charge.

Supply & fixing and fixing in repairs ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed by Engr-in- Charge.

Supply & fix decorative box type 20 watt light fitting,blue coloured end caps, pre-wired and including providing single/double side LED tubelight(tube rod) white/warm 20 watt-01 No made of aluminium extrusion with high efficient LED driver,IP-20, Tube efficiency of 100lm/w, including PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose and including removing old unserviceable fitting complete all as specified and directed by Engr-in-Charge.1.

Supply & fix decorative box type 9 watt light fitting,blue coloured end caps, pre-wired providing single side LED tube 9 watt-01 No, and including PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose and including removing old unserviceable fitting complete all as specified and directed by Engr-in-Charge 1.

Supply and fixing, in repairs 20 watt LED pride plus triyca batten white/warm decorative type,high quality materials,240V,50Hz, and slim integrated body,easy to install,100 lm/w,PC diffuser and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed by Engr-in-Charge.

Taking down old unsv light fitting from existing location and Supply and fixed aesthetically designed LED flat panel for surface mounting which provides soft-light and glare free symmetrically illumination 2'x2' LED 40/42 Watt(600x600x70mm) light fitting and including providing internally prewired,LED driver,connector and also can be suspended with provided kit,nut,bolts and washers as per site requirement and including connecting up with ceiling rose to fitting complete all as specified and directed by Engr-in-Charge.

Taking down old unsv light fitting from existing location and Supply and fixed in repairs recess mounting 2'x2' LED 40/42 Watt light fitting slimmest 9 mm thin in class LED ceiling panel with best in class aesthetick white powder coated frame blended seamlessly with ceiling layout suitable for 600X600mm mudular ceiling grid and also can be suspended with provided kit and including connecting up with ceiling rose to fitting complete all as specified and directed complete all as specified and directed by Engr-in-Charge.

Supply and fixing, in repairs 40 watt LED pride plus NXT batten, warm light decorative type,high quality materials,240V,50Hz, and slim integrated body,easy to install,125 lm/w,PC diffuser and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed by Engr-in-Charge.

Supply and fixing, in repairs 20 watt LED batten nicolaus glamtube integrated design, easy to install,efficency,125 lm/w,PC diffuser and robust housing, high quality materials,pre-wired and connect with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed by Engr-in-Charge.

Supply and fixing , in repairs 36 watts LED supernova light fitting high wattage complete ,energy efficient, integrated design, easy to install,PC diffuser, high quality materials,pre-wired incl connect with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed by Engr-in-Charge.

Supply & fixing, in repairs 40 watt LED light fitting white lighting, high quality materials and intergrated design, PC diffuser, reliable and robust housing structure, easy to install, efficency 125 lm/w necessary arrangements for fixing with LED fitting to ceiling rose complete all as specified and directed by Engr-in-Charge.

Supply & fixing , in repairs 20 watts LED Austra mirror light fitting,contemporary design decorative LED lighting with extruded polycarbonate, environmental friendly, energy efficient, easy to install,PC diffuser, high quality materials,pre-wired incl connect with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed by Engr-in-Charge.

Supply and fixing round/square shape 6 watt 220 V,AC,recessed mounting type with high efficiency PMMA diffuser soft glare free light complete with drivers,holders,LEDlamp/strip suitable for roof ceiling including connecting up with three core flexible copper wire of suitable size and incl removing old unserviceable fitting complete all as specified and directed by Engr-in-Charge.

All as per item no.156 ditto but 12 watt LED

All as per item no.156 ditto but 15 watt LED

All as per item no.156 ditto but 18 watt LED

All as per item no.156 ditto but 24 watt LED

Supply & fixing, in repairs glaze model type wall mounting light fitting 9 watt and incl LED lamp(White/Warm) decorative type,in durable plastic body & designer mesh in gold finish incl connect with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed by Engr-in-Charge.

Supply & fixing , in repairs floret model type wall mounting light 9 watt and incl LED lamp(White/Warm) decorative type,in durable plastic body & designe incl connect with LED fitting to ceiling rose and incl removing old unserviceable fitting complete all as specified and directed by Engr-in-Charge.

Supply & fixing, in repairs sana model type wall mounting light 9 watt and incl LED lamp(White/Warm) decorative type,in durable plastic body & designe incl connect with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed by Engr-in-Charge.

Supply & fixing, in repairs city-2 model type wall mounting light 9 watt and incl LED lamp(White/Warm) decorative type,in durable plastic body & designe incl connect with LED fitting to ceiling rose and incl removing old unserviceable fitting complete all as specified and directed by Engr-in-Charge.

Supply & fixing, in repairs city-3 model type wall mounting light 9 watt and incl LED lamp(White/Warm) decorative type,in durable plastic body & designe incl connect with LED fitting to ceiling rose and incl removing old unserviceable fitting complete all as specified and directed by Engr-in-Charge.

Supply & fixing , in repairs globe model type wall mounting light 9 watt and incl LED lamp(White/Warm)decorative type,in durable plastic body & designe incl connect with LED fitting to ceiling rose and incl removing old unserviceable fitting complete all as specified and directed by Engr-in-Charge.

Supply & fixing , in repairs SS housing model type wall bracket light 9 watt and incl LED lamp(White/Warm)decorative type,in durable plastic body & designe incl connect with LED fitting to ceiling rose and incl removing old unserviceable fitting complete all as specified and directed by Engr-in-Charge.

Supply & fixing , in repairs energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired of luminaires including LED light driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed by Engr-in-Charge.

Supply & fixing , in repairs LED bldg secruity light fitting sensor based of capacity 25 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection and including removing of old unserviceable item complete all as specified and directed by Engr-in-Charge.

Supply & fixing , in repairs LED bldg secruity light fitting sensor based of capacity 35 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection and including removing of old unserviceable item complete all as specified and directed by Engr-in-Charge.

Supply and fix GI bracket pipe of size 25 to 32 mm dia as suitable medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 20X4 mm thick -02 Nos suitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed by Engr-in-Charge.

Supply & fixing , in repairs 60-70 Watt LED fitting energy saving,environmental friendly,long life with SMD LEDs as light source with driver included, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with inbuilt surge protector and cable connection from ceiling rose to light fitting and testing and including removing of old unserviceable item complete all as specified and directed by Engr-in-Charge.

Supply & fixing , in repairs LED track light fitting of capacity 20 Watt LED with incl providing fixing arrangements suitable roof/ceiling etc. in aluminium PDC AL housing,clear diffuser IP-20 protection and including removing of old unserviceable item complete all as specified and directed by Engr-in-Charge.

Supply & fixing , in repairs LED spike light fitting of capacity 12 Watt LED with incl providing fixing arrangements with die cast aluminium PDC AL housing,clear diffuser IP-66 protection and including removing of old unserviceable item complete all as specified and directed by Engr-in-Charge.

Supply & fixing , in repairs LED bush light fitting of capacity 12 Watt LED with incl providing fixing arrangements with die cast aluminium PDC AL housing,clear diffuser IP-66 protection and including removing of old unserviceable item complete all as specified and directed by Engr-in-Charge.

Supply & fixing , in repairs in sheet metal enclosure with DD/AD type, 415 volts AC,TPN DB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection and including removing old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed by Engr-in-Charge.

Supply & fixing , in repairs in sheet metal enclosure with acrylic door type, double door ,415 volts AC,VTPN DB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection and including removing old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed by Engr-in-Charge.

Supply & fixing , in repairs sheet metal enclosure, with acrylic door type, double door, 240 volts AC,SPN,DB, 12 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed by Engr-in-Charge.

Supply & fixing in repairs sheet metal enclosure, with acrylic door type, double door, 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed by Engr-in-Charge.

Supply & fix and fixing in repairs and sheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed by Engr-in-Charge.

Supply & fix and fixing in repairs mini MCB,32 A,DP 'C and motor starter with socket including with suitable sunken box in concealed/surface and internally connected properly suitable for cooking electrical appliances including protection and including removing old unserviceable items and making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed by Engr-in-Charge.

Supply & fix and fixing in repairs MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed by Engr-in-Charge.

Supply & fix and fixing in repairs MCB SPN 32 to 40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed by Engr-in-Charge.

Supply & fix and fixing in repairs MCB SPN 40 to 63 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed by Engr-in-Charge.

Supply & fix and fixing in repairs MCB TPN 40 to 63/100 Amps 10 KA,"C" series,AC,440Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed by Engr-in-Charge.

M & L for sub main wiring complete in repairs with 2 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn drawn through and including PVC conduit in concealed ISI marked medium grade(MMS) accessories such as Tee,corner, overlaping connector etc and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

All as per ditto item No .186 -ditto- but 2 run x 6 sqmm+1 run earth wire complete all as specified and directed.

All as per ditto item No 186 -ditto- but 2 run x 4 sqmm+1 run earth wire complete all as specified and directed.

All as per ditto item No .186 -ditto- but 2 run x 2.5 sqmm+1 run earth wire complete all as specified and directed.

All as per ditto item No .186 -ditto- but 2 run x 1.5 sqmm+1 run earth wire complete all as specified and directed.

Supply & fix and fixing in repairs suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts,50Hz suitable for AC's/Geysers complete all as specified and directed by Engr-in-Charge.

Supply & fix and fixing in repairs MCCB, 125 Amps,4 pole,415 Volts , 16/18KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washers and including removing old unserviceable item complete all as specified and as directed by Engr-in-Charge.

Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron strip of size 32 X 6 mm from earth electrode to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including char coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1, including excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value complete all as specified and directed by Engr-in-Charge.

S&F for PVC non-metalic rigid conduit incl boxes,junctions boxes 1 to 4 way & terminals but incl of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers lock nuts,saddles,pipes hookes etc ISI marked heavy duty of size 20/25 mm dia for LAN,telephone and TV connections cablesincluding cutting,chasses and making good disturbed surfaces to match with existing surfaces with plaster/putty and including removing of old unserviceable item complete all as specified and directed by Engr-in-Charge.

Cutting the existing surface wall of brick/stone masonary and making round hole at any height suitable for fixing 200 to 450 mm sweep exhaust fan including providing nut,bolt and washers after grouting in PCC and including 3 mm dia 5 cm apreature size GI jali and proper aluminium frame to avoid insect protection fix at inner surface of wall and making good the disturbed surface area complete all as specified and directed.

Taking down carefully existing electric meters of any type/capacity from work site and deposit to MES store yard/ Charge holder without damage for safe custody and supply and fixing smart electric meter single phase four wire energy meter as per BIS -16444 2015 (Reaffermid 2020), ISI marked in existing board /floor panel having current range 10-60 Amps,240 Volts, accuracy class 1.0 and including providing necessary items for functioning complete all as specified and directed by Engr-in-Charge.

Supply and fixing TV sockets one module with top cover plate and inner frame including all necessary accessories and including removing of old unserviceable item complete all as specified and directed.

Supply & fix and fixing in repairs Telephone socket(RJ11) one module with top cover plate and inner frame including all necessary accessories and including removing of old unserviceable item complete all as specified and directed.

Supply & fix and fixing in repairs copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;2.5 sqmm and including electric connection through PVC conduit in concealed/casing caping in surface from ceiling fan to ceiling rose and including removing old unserviceable item complete all as specified and directed.

Supply & fix and fixing in repairs LED wall mounted bldg secruity light fitting sensor based of capacity 35 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection and including removing of old unserviceable item complete all as specified and directed by Engr-in-Charge.

Supply & fix and fixing in repairs 20 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed by Engr-in-Charge.

Supply & fix and fixing in repairs 40 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed by Engr-in-Charge.

Supply & fix and fixing in repairs LED flood light light fitting of capacity 120 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP-65 protection and including removing of old unserviceable item complete all as specified and directed by Engr-in-Charge.

Supply & fix and fixing in repairs LED flood light light fitting of capacity 100 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP-65 protection and including removing of old unserviceable item complete all as specified and directed by Engr-in-Charge.

Supply & fix and fixing in repairs LED flood light light fitting of capacity 70 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP66 protection and including removing of old unserviceable item complete all as specified and directed by Engr-in-Charge.

Supply and fixing and in repairs galvanised metal flush box 1/2 module,1.20mm thikness, ISI marked,and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed by Engr-in-Charge.

All as per item No-206 -ditto- but meteal box 3 module

All as per item No-206 -ditto- but meteal box 4/5 module

All as per item No-206 -ditto- but meteal box 6 module

All as per item No-206 -ditto- but meteal box 8/9 module

All as per item No-206 -ditto- but meteal box 12 module

All as per item No-206 -ditto- but meteal box 16 module

All as per item No-206 -ditto- but meteal box 18 module

Supply and fixing in repairs modular white/wood/glazed type cover plate with frame 1 module,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

All as per item No-215 -ditto- but modular white/wood/glazed type cover plate with frame 2 module

All as per item No-215 -ditto- but modular white/wood/glazed type cover plate with frame 3 module

All as per item No-215 -ditto- but modular white/wood/glazed type cover plate with frame 4/5 module

All as per item No-215 -ditto- but modular white/wood/glazed type cover plate with frame 6 module

All as per item No-215 -ditto- but modular white/wood/glazed type cover plate with frame 8/9 module

All as per item No-215 -ditto- but modular white/wood/glazed type cover plate with frame 12 module

All as per item No-215 -ditto- but modular white/wood/glazed type cover plate with frame 16 module

All as per item No-215 -ditto- but modular white/wood/glazed type cover plate with frame 18 module

Taking down and Hanging only ceiling fan, wall fans after cleaning and connecting up including provision of cable from ceiling rose/switch socket or connector to fan and including providing necessary accessories complete all as specified and as directed.

Taking down and fitting only exhaust fan after cleaning and connecting up including provision of cable from ceiling rose or connector to fan and including providing necessary accessories complete all as specified and as directed.

Fixing only and connecting electric meters 10-60 Amps any type single or three phase complete all as specified and directed and including providing necessary accessories complete all as specified and as directed.

Taking down carefully existing electric meters of any type/capacity from work site and deposit to MES store yard/ Charge holder without damage for safe custody and supply and fixing single phase electronic meters temper proof LCD display with polycarbonate cover 230Volts,10-60 Amps, accuracy class-I,50Hz, confirming to IS-13779,IP-54,with parameters to show data,time current reading,load,PF,voltage and KWH including connected necessary items for functioning complete all as specified and directed by Engr-in-Charge.

Taking down carefully existing electric meters of any type/capacity from work site and deposit to MES store yard/ Charge holder without damage for safe custody and Supply only three phase electronic meters temper proof LCD display with polycarbonate cover 415Volts,10-60 Amps, accuracy class-I,50Hz, confirming to IS-13779,IP-54,with parameters to show data,time current reading,load,PF,voltage and KWH including connected necessary items for functioning complete all as specified and directed by Engr-in-Charge.

Taking down carefully existing electric meters of any type/capacity from work site and deposit to MES store yard/ Charge holder without damage for safe custody and supply and fixing smart electric meter three phase four wire dual source prepaid energy meter as per BIS -15884 marked in existing meter board /floor panel with pre payment capacity touch keypad based digital having current range 10-60 Amps,415 Volts, accuracy class 1.0 along with parallel home display split unit with inbuilt load control switch containing provision for TOD and RTC, inbuilt feature to sense the DG mode through PLSI dual source registration wrt grid as well as DG supply and dynamic load allocation facility from grid and DG ,capable to define for tariff slabs, happy hours and holidays definition and including providing necessary items for functioning complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs of PVC round cover blanking plate of size 2'' to 6'/ as per site requirement with screws of existing fan junctions/ wiring junctions boxes/ loop boxes etc

supply and fixing hylem sheet of size 4"x 6" with necessary screws and fixing arrangement at any height/roop etc complete all as specified and directed.

supply and fixing hylem sheet of size 4"x 8" with necessary screws and fixing arrangement at any height/roop etc complete all as specified and directed.

supply and fixing hylem sheet of size 6"x 8" with necessary screws and fixing arrangement at any height/roop etc complete all as specified and directed.

supply and fixing hylem sheet of size 8"x 10" with necessary screws and fixing arrangement at any height/roop etc complete all as specified and directed.

supply and fixing hylem sheet of size 10"x 12" with necessary screws and fixing arrangement at any height/roop etc complete all as specified and directed.

supply and fixing hylem sheet of size 12"x 18" with necessary screws and fixing arrangement at any height/roop etc complete all as specified and directed.

Please Enable Macros to View BoQ information