Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.8 LAccepted-AOC 7 MULLAI NAGAR MAIN ROAD WEST TAMBARAM CHENNAI 600045 | CHENGALPATTU | TAMIL NADU | 600045 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹19.6 L+₹2.4 L (14.0%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹22.5 L+₹5.3 L (31.2%)Rejected-Finance | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹23.1 L+₹6.0 L (34.9%)Rejected-Finance NO 17 5 SOLOMON STREET ADHI NAGAR EAST TAMBARAM CHENNAI 600 059 | CHENNAI | TAMIL NADU | 600001 | L4 | Rejected-Finance Not being lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
18 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GARRISON ENGINEER (AF) AIR FORCE STATION TAMBARAM, CHENNAI - 600 046
REPAIRS AND MAINTENANCE TO B/R WORKS AT WTI, MTI AT AF STATION TAMBARAM
2023_MES_629004_1
GE(AF)/TBM/8683/E8
Open Tender
Civil Works
Item Rate
270 days
AIRFORCE STATION TAMBARAM
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE AF TAMBARAM
₹60,000
Yes
2 Jan 2024
20 Nov 2023
20 Dec 2023
20 Nov 2023
18 Dec 2023
5 Dec 2023
21 Nov 2023 - 28 Nov 2023
Amount
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.
S & F for for providing gypsum board flse ceiling using 9 mm thick gypsum board tiles of size 60 m X 60 cm with aluminium laminate finish on one side and vinyl laminate finishon other side fixed with screw on powder coated aluminium sections grid frame work using 'T' and angle sections made out of 0.50 m thick required as in main member, seconndary members permeter angle section including provision of GI wire suspender of size not less than 4 mm dia fixed to roof members at the rate of 1200mm C/C both ways etc complete all as specified and as directed. Note: The unit rate quoted shall be deemed to include the cost of taking down and refixing of the electrical fittings such as ceiling fan, light fittings etc and safe custody of same till refixing.
Supply and fixing Hollow PVC sheet wall lining (paneling) consisting of 5mm thick wood grain printed PVC hollow shee fixed as per manufacturers specifications and as directed) complete all as specified and as directed. Make:M/s Rajshree plastic wood or Equivalent
S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.
Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid dry or laid dry & pointed all as specified and as directed.
M&L PCC 1:4:8, Type D2 ,using 40 mm graded stone aggregate, 75 mm thick, as in sub base all as specified and as directed.
M&L sand filling under paver blocks including watering and consolidation all as specified and as directed
M&L rubber mould machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness,M-35 Grade with grey cement and pigment all as specified and as directed
M&L Screed bed or bedding layer of mortar 15mm thick for laying floor finish in CM 1:6 complete allas specifiedf and as directed
S&F for Chequered cement concrete tiles 30cm x 30cm x 20-25mm thick, set, jointed and pointed in neat cement slurry in floors Pattern, size and shade pointed with grey cement and pigment all as specified and as directed
M&L for providing cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate, as in cills, steps, bands, copings, bed plates , etc including necessary form work, all as specified and as directed
M&L for Plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in kerbs or mud stops, rounded or chamfered on edges all as specified and as directed
Dismantling floor hearth or wall tiling incl cement mortor bedding (but not backing) removing the rubbish of the premises all as specified and as directed
Demolition of concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) all as specified and as directed
Demolition of Concrete of any description and in any position not otherwise specifically provided for all as specified and as directed
Roughing surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 Kg of cement per sqm all as specified and directed.
Taking down old cement plaster incl racking out joint hacking for keys and scrubbing down with water on wall / ceiling all as specified and as directed
M&L Non skid ceramic coloured tiles 6-7 mm thick (square/rectangular) area of each tile exc 0.06sqm but n.exc 0.11Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed plaster in CM 1:6 all as specified and directed
M & L glazed ceramic coloured tiles of size 350x250x7/450x350x7 mm thick on vertical surface as in dados, skirting etc, set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed
M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular ) in floors ,area of each tile exc 0.11 sqm but n.exc. 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, over and including 15 mm thick screed plaster in CM 1:6 complete all as specified and directed
All as per item No 20 above but in vertical surfaces set set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed
M&L for vitrified ceramic coloured tiles light shade 10 mm thick (square / rectengular) polished area of each tile not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1 :4 in floors etc complete all as specified and as directed.
All as per item No 22 but in vertical surfaces set set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed
M&L Machine cut kota stone slab flooring 20 -25 mm thick over cement screed based laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polish complete including 20 mm screed bed layed with CM 1 :4 etc complete all as specified and as directed.
M & L for kota stone salb 20-25 mm thick in riser of steps,skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polish complete including 15 mm thick screed bed in CM 1 :4 in floors etc complete all as specified and as directed.
M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing incl 20 mm thick screed bed in CM 1:4 complete complete all as specified and as directed
M&L for Granite edge moulding to 18-20 mm thick stone of counter vanities etc incl machine polishing to edge to give high gloss finish etc complete all as specified and as directed
Taking down Aluminium chowkats/Frames of area not exc 1.5 Sqm with shutter (without taking off shutters from the frame) each all as specified and as directed
All as per item No 28 above but area exc 1.5 Sqm & not exc 4 Sqm
S&F for Powder coated for aluminium Powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
S&F for Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
S&F for Powder coated aluminium window and ventilator shutters, fixed/sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,etc. complete all as specified and directed.
S&F for Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle all as specified and directed.
S&F in repair aluminium powder coated grills (pattern DG-104) weight of 2.00 to 3.20 Kg/Sqm for windows, ventilators, etc including jointing, cleats etc and fixed with medium screws into walls / frame work etc complete all as specified and as directed
S&F Brass two lever Mortice lock,vertical type, size 100 mm
S&F in repairs door closer, aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80kG all as specified and directed.
S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick alumin ium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed.
S&F in pre laminated particle board 12 mm thick exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination with lipping as in doors of cupboards and cabinets all as specified and as directed
S&F 5.5 mm thick plain ordinary glass fixed in squares not exc 0.5 Sqm in each panes with wooden beading or glazing putty/aluminium partitions etc all as specified and directed.
S&F 5.5 mm thick plain ordinary glass fixed in squares exc 0.5 Sqm in each panes with wooden beading or glazing putty/aluminium partitions etc all as specified and directed.
Taking down of steel tubing and connections complete on walls floors etc for 15mm bore of pipe.
All as per item No. 41 above but bore of pipe in 20mm dia.
S&F Galvanised iron medium graded tubes with all fittings and fixed complete on walls ceiling or laid in floors etc,15mm in dia all as specified and directed.
All as per item No. 43 above but bore of pipe 20 mm
Refixing of old steel tubing and connections is in now or old positions (walls ceiling floors etc) bore of pipe 15mm.
All as per item No. 45 above but bore of pipe 20mm.
Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. all specified and as directed.
Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. all specified and as directed.
S&F in repairs 15 mm bore CP Bib tap cast copper alloy fancy type crutch or butterfly handles screwed down for iron or for brass ferrule all as specified and directed.
S&F in repairs 15 mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes all as specified and directed.
S&F in repairs 15mm dia chromium plated fancy type angle/stop cock cast copper alloy screwed down high pressure fancy screwed both ends for pipe or for union all as specified and directed.
S&F in repairs 15 mm dia Bip tap standard PTMT any colour screwed for iron pipe (Min weight 90 gms) all as specified and directed.
S&F in repairs 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) all as specified and directed.
S&F in repairs 15mm dia Angle/Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) all as specified and directed.
S&F in repairs PVC cover for over head tank of any capacity
S&F in repairs 125mm size brass chromium plated shower rose with swivel joints and shower arm complete all as specified and directed.
S&F in repairs PVC connections 15mm dia 600mm long (for cold/hot water connection with brass or PTMT flynuts and washer at both ends all as specified and directed.
S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges.
Disconnecting existing tanks and S&F new three layered PVC sintex water tank of capacity exc 250ltrs including hoisting and positioning complete all as specified and directed.
All as per item No. 60 above but 1000 Ltrs capacity PVC tank.
S&F in repairs Ball valves of High pressure of PTMT with epoxy coated with aluminum rod & high density plastic ball 15mm inside flushing cistern( min wt - 142gms) all as specified and directed.
All as per item No.62 above, but 20mm dia (min wt - 210gms)
All as per item No.62 above, but 25mm dia (min wt - 455 gms)
Cleaning of tank by removing of all scale and dirts & etc, from tank and mouth of circutary pipe etc not exc 500 Ltr incl writing of date of cleaning and due date of leaning on each tank all as directed.
All as per item No.65 above but exc 500 ltr and not exc 1000 Ltrs
S&F in repairs vitreous china urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) all as specified and directed.
S&F in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all as specified and directed.
S&F in repairs EWC seat cover White flat bottom solid with CP hinging device, nuts & bolts etc complete all as specified and directed.
S&F in repairs PVC valve less syphonic action type flushing cistern 10 litres capacity, high/low level with inlet ball valve, float and handle including brackets all as specified and directed.
S&F in repair vitreous china WHB flat back of size 550x400mm incl GI Brackets, CP brass waste coupling with check nut and washers of suitable to be complete all as specified and directed.
S&F in repair vitreous china water closet pedestal pattern with P or S trap incl connection to flush and water pipe etc complete all as specified and directed.
S&F in repairs Vitreous china squatting pan orissa pattern size 500x440mm white with integral foot rest (excluding flushing cistern and flush pipe ) and making good to floor all as specified and directed.
S&F in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia, for wash hand basin / urinal.
S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe (min weight 40 gms) .
Taking down rain water pipes, waste/soil pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc including cleaning or refixing or removal to store all as specified and directed.
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floors all as specified and directed.
All as per item No. 77 above but 110 mm bore
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed complete to walls all as specified and directed.
S&F 110mm dia PVC (SWR) Pipe single socketed in any length with rubber ring joints fixed complete to walls all as specified and directed.
S&F 75mm dia PVC (SWR) bend with access door
S&F 110mm dia PVC (SWR) bend with access door
S&F in repairs 75mm dia PVC (SWR) floor trap with grating incl jointing with solvent cement all as specified and directed.
S&F in repairs 100mm dia PVC (SWR) floor trap with grating incl jointing with solvent cement all as specified and directed.
Taking down and refixing of WHB viterous china of any type and size in same position or other position as directed.
S&F in repairs chromium plated health faucet with 1 mtr steel tubing all as specified and directed.
S&F in repair sink with drainage board made of stainless steel 0.9 mm thick kitchen or labourator with plug washers,and waste pipe, including bedding in CM to dwarf wall or including fixing cntilever brackets and conecting union to pipe over all size 915mmx450mm bowl size 410mm x 330mm x 160mm all as specified and directed.
Cutting chases for concealed water tubing and making good, cutting not exc 20cm in girth or width all as specified and directed.
Demolition of brick work built in CM incl all quoins arches pillers etc all as specified and directed.
M&L fly ash Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specified and directed.
M&L Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in built in cement mortar 1:4 complete all as specified and directed.
Taking down old cement plaster including racking out joint hacking for keys and scrubbing down with water etc., on wall/ ceiling surfaces and removing the debris to outside MOD land complete all as specified and directed.
M&L for rendering 15mm thick on brick/ concrete surfaces with CM 1:6, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick on ceiling surfaces with CM 1:3, finished even and smooth without using extra cement all as specified and directed.
M&L for preparation of newly plastered wall surfaces and applying three coats of white wash all as specified and directed.
S&F in repairs Internal componants part (except PVC body) of PVC Flushing cistern 10 Ltr capacity including ball valve etc complete (Flush Kit)
Taking down chowkats/Frames of area not exc 1.5 Sqm with shutter (without taking off shutters from the frame) each all as specified and directed.
All as per item No 97 above but area exc 1.5 Sqm & not exc 4 Sqm
Taking down shutters of any description of area not exc 1.5 Sqm each
Taking down shutters of any description of area exc 1Sqm & not exc 2 Sqm each all as specified and directed.
Resecuring or easing & adjusting without taking down of shutters of any description area not exc. 1sqm each as directed.
Resecuring or easing & adjusting without taking down of shutters of any description area exc. 1sqm and not exc 2sqm each each as directed.
S&F second class hard wood plain fillets, square, rectangular in section, wrought, sectional area exc 6 but not exc 13 Sq cm, fixed with screws to wooden frame work all as specified and directed.
All as per item No 103 above but sectional area exc 13 and not exc 25 sq cm
S&F 2nd class Hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put togather with glue pinned at joint all as specified and directed.
S&F 2nd class Hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed.
All as per item No.106 here in before but with or without sash bar of size 25mm thick for window and the like all as specified and directed.
S&F 2nd class hard wood plain framed panelled shutter 30mm thick (any number of panel) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers of ply wood commercial type all as specified and directed.
S&F flush shutter 30mm thick Solid core construction with Block board and plywood face pannels, commercial type on both sides all as specified and directed.
Taking down PVC chowkats/Frames of area not exc 1.5 Sqm with shutter (without taking off shutters from the frame) each all as specified and directed.
Taking down PVC shutters of any description of area not exc 1.5 Sqm each all as specified and directed.
S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification & drawing all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the style & rails with suitable PVC sheet beading, and jointed together with solvent cement,supplying & fixing in the frame at site as per specification and drawing all as specified and directed.
S&F 100 mm long stainless steel butt hinges for PVC doors
S&F Extruded aluminum alloy with galvanised MS hinges pin anodised of size 75mm type D-22
S&F Extruded aluminum alloy with galvanised MS hinges pin anodised of size 100mm type B-21
S&F in repairs Extruded aluminum alloy with galvanised MS hingeS pin anodised of size 100mm type B-21
S&F Extruded Aluminium alloy handle fabricated type, anodised of size 150mm
All as per item No 118 above but fixed in repair
S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm
All as per item No 120 above but fixed in repair
S& 300mm size mild steel ordinary rat & tail rod pattern spring (Helical) including roller & roller plate
All as per item No 122 above but fixed in repair
S&F in floor door stopper 140 mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring in floors.
S&F in repairs floor door stopper 140 mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring in floors.
S&F Aluminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolt of extruded section or cast alluminium alloy of size 250 mm.
All as per item No 126 above but fixed in repair
M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.
Cutting holes in to brick wall built in cement mortar exc half brick & n.exc full brick and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and directed.
M&L for small articles such as hold fasts etc. of Flat Iron 25 x 3, Grade confirming to Fe-290 Gde E-165 all as specified and directed.
M&L for preparing small articles such as hold fasts, end of posts etc. of area not exc 0.1Sqm and treated with Cresote Oil/ black bituminous paint etc all as specified and directed.
M&L preparing of wood and wood based materials, steel, and iron work, new or old and treating ends of posts, backs of chowkats, etc, area tarred exc 0.1 sq m but not exc 0.5 sq m each and treated with tar or coat tar black paint all as specified and directed.
M&L for framed work such as grill, grating, guard bars etc. Grade confirming to Fe-290 Gde E-165 all as specified and directed.
Dismantling of Mild steel works such as grills, gratings,guard bars of any description
Dismantling of mild steel grills and refixing in the same opening as directed.
M&L for preparing new Steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer
S&F Stainless steel wire mesh of nominal dia of wire 0.36mm and average width of aperture 1.40mm & fixed with stainless steel wire staples including wooden fillets/beadings, screws etc complete all as specified and as directed
S&F in repairs Stainless steel wire mesh of nominal dia of wire 0.36mm and average width of aperture 1.40mm including wooden fillets/beadings, screws etc complete all as specified and as directed
Hacking out old broken glasses any thickness size, quality or description from steel/wooden frames fixed with putty or with beads all as specified and directed.
S&F 4mm thick plain ordinary glass fixed in squares not exc 0.5 Sqm in each panes with wooden beading or glazing putty all as specified and directed.
S&F in repair mortice lock of mild steel vertical type of size 150mm 6 Lever.
S&F in repairs door closer, aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80kG.
Running welding in repairs not exceeding 6mm thick metal sheets such as dovetailed hinges, peg stay assembly and MS butt hinges etc with steel window and steel frames of doors all as specified and directed.
Easining / straightening of shutters frame of steel windows of any type making operational and greasing to hinges (welding and painting will be measured separately) all as directed.
S&F in repairs mild steel plate type steel handle of 100mm size left/right suitable for steel windows with fiber washer tube type including nuts and bolts.
S&F in repairs mild steel peg stays 150 mm long for steel windows
S&F in repairs Aluminium alloy tubular 20mm external dia for curtain rod in pelmet box, curtain rods etc.
S&F in repairs Aluminium Brackets for item No 147 above as per approved type and shape.
Resecuring, adjusting, cushioning minor repair of aluminum door,rubber beeding,lock etc without taking down, area exc 1.0 Sqm but not exc 2.0 Sqm all as specified and directed.
All as per item No 149 above but area n.exc 1.00 Sqm for windows
S&F in repairs 12 mm thick toughned glass fixed with rubber beading or with oil putty etc complete all as specified and directed.
S&F in repairs 18/19 mm thick plywood, grade BWP, type BB fixed in cupboard shelves, partitions etc., including wooden beading/ fillets all-round etc., complete all as specified and as directed.
S&F in repair pre laminated particle board 12 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination with lipping as in doors of cupboards and cabinets all as specified and as directed
S&F aluminum anodised Hasp & Staple of size 75mm safety type including bolt to hinge plate and fixed with screws
S&F in repairs 75mm long hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws.
S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick alumin ium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed.
S&F in repairs two lever lock (vertical type), 100 mm long, brass body suitable for aluminium doors.
S&F in repair 3 to 4mm plain mild steel wire galvanised class 3, fixing to wood, concrete, steel etc including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins etc as directed
Dismantling AC corrugated or semicorrugated sheets in roof covering / wall cladding all as specified and directed.
M&L 6mm thick AC corrugated sheet on roof covering fixed with L or J type hook all as specified and directed.
Fixing only 6mm thick AC corrugated sheets with J or L hook in good condition obtained from item No 159 here in before.
S&F in repair 2mm thick fibre glass reinforced transulent corrugated sheeting with two corrugate side lap fixed with 'L' or 'J' type hook fixed in roof ,wall etc all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc all as specified and directed.
S&F in repairs mild steel, plain black sheet 0.80 mm thick in wall cladding, steel gates and similar work cut to size, holes punched; including round headed screws, clout nails or rivets and fited to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as required all as specified and directed.
S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete, conforming to Fe-290 (Gde E-165) all as specified and directed.
S&F in repairs steel windows with side hung shutters including box type hinges steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed.
S&F in repairs steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and directed.
M&L cleaning and greasing all moving parts of hanger door shutter of area exc 20 Sqm, taking down from position straightening the member if any as required for smooth functioning of hanger door all as directed by Enge - in- Charge. Note : Supply of new cost iron wheel shall be measured and paid separately under relevent item
Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth (before and after applying putty as per site situation) upto entire satisfaction of Engineer-in-charge and after preparing the surface smooth applying one coat of white wash with using paint brush complete all as specified and as directed
Material and labour for preparation of old decorated surfaces (plastered/unplastered) of ceiling by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth ,upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying one coat of oil bound distemper (washable) by using electric paint roller or roller brush, as per existing or as approved tint/colour complete all as specified and as directed.
Material and labour for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, washing down with water including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make surface even and smooth , upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying one coat of cement base paint with paint brush or roller brush, as per existing or as approved tint/colour complete all as specified and as directed.
Material and labour for preparation of old surfaces (plastered/ unplastered) of walls/pillars /cornices by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc including applying white cement based putty where required for filling to depressions to make the surface even , upto entire satisfaction of Engineer-in-charge, after preparing the surfaces applying one coat of weather proof exterior emulsion paint (wheather coat Apex, 100% exterior grade), as per existing or as approved tint/colour complete all as specified and as directed
Mahathi Constructionss
M R Govinda Reddy and Sons
kcs builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .