Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹5.0 L
EMD Value
₹6,300
Closing Date
28 Oct 2024, 10:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
PURSHOTTAM
Construction of Drain and CC Road Near Sandipani School Jagat Area at Ward No. 34 in Kalaburagi city (Category-SC) (Est Cost Rs. 6.00 Lakhs) (15th Finance 2020-21 to 2022-23 Savings)
DMA/2024-25/OW/WORK_INDENT31010
DMA/2024-25/OW/WORK_INDENT31010
Reserved
Other Works
Two Tender Document System(Two Cover)
DMA City Corporation Kalaburagi
5 documents required · 5 mandatory
satisfactorily completed (at least 50% of the contract value), as prime contractor, at least one similar nature of Work done certificate Any Civil Construction Work of value not less than Rs 1.5 Lakhs in last 5 years. i.e 2019-20 to 2023-24 (Updated to 2024-25) (upload scan copy of work done Certificate report issued by the employer (Not less than the rank of Executive Engineer) and originals should be produced while opening the tender.)
PWD Registration Certificate
Turnover certificate achieved in at least One financial years an annual financial turnover (in all classes of civil engineering construction works only) of Rs equal to the estimate cost Rs. 6.00 Lakhs (usually not less than the estimated cost under this contract) (upload scan copy of audit report issued by CA along with UDIN No. and originals should be produced while opening the tender.)
SC Category Certificate.
Tender bid capacity The bidder should upload the ongoing works in hand
AS PER BID DOCUMENT
₹500
₹6,300
14 Oct 2024
14 Oct 2024
29 Oct 2024
28 Oct 2024
Construction of Drain and CC Road Near Sandipani School Jagat Area at Ward No. 34 in Kalaburagi city (Category-SC) (Est Cost Rs. 6.00 Lakhs) (15th Finance 2020-21 to 2022-23 Savings)
Dismantling of cement concrete pavement by mechanical means
using pneumatic tools, breaking to pieces not exceeding 0.02 m3
in volume and stock piling at designated locations and disposal of
Earth work in surface excavation by mechanical means for lowering & leveling
the ground for all works other than foundation in all kinds of soils & upto depth
not exceeding 300mm as per drawing and te...
Construction of sub-grade and earthen shoulders with approved
material obtained from borrow pits with all lifts & leads,
transporting to site, spreading, grading to required slope and
compacted to mee...
Construction of Granular Sub-Base of required grading as
per design mixing in a mechanical mix plant at OMC, carriage
of mixed Material to work site, spreading in uniform layers
with motor grader on p...
Providing, laying, spreading and compacting graded stone
aggregate to wet mix macadam specification including premixing
the Material with water at OMC in mechanical mix plant carriage
of mixed Materia...
Providing and constructing un-reinforced plain cement
concrete pavement, thickness as per design, over a prepared
sub base, with 43 grade cement or any other type as per
Clause 1501.2.2 M30 (Grade), c...
Repairs to Machinehole for different depths including removal of debris,
levelling the brick masonry, construction of brick masonry upto Ground
level, providing CC coping alround the MH cover, plaster...
Earth work excavation by manual means for drains, canals, waste weir, draft,
approach channels, key trenches, foundation of Buildings & bridges and such
simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of
building, Irrigation works, Sub structure works of bridges, Drain works &
other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tyin...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-1 31010(SC).doc
Tender Document • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .