Construction of New Health and Wellness center at Zari and Patlara, Daman. (2nd Call) (E-30082)

Amount

Civil work

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto all lead.(C) All types of soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead. All type of Soil

Providing and filling in foundation & plinth with Rubble filling in layers of 20 cm thickness including watering and consolidating etc.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering.

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth.etc complete as directed by engineer-in-charge.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever upto All floor level etc complete as directed by Engineer-incharge. etc complete as directed by Engineer-incharge.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the Cost of reinforcement for reinforced concrete work in (D) Columns, Pillars, Circular, rectangular posts and struts below plinth and upto all floor level. etc complete as directed by Engineer-incharge.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in (E) Staircases upto all floor level, etc complete as directed by engineer-incharge.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in (C) Slabs, landing, shelves, Chhajja and Cantilever all floor level, etc complete as directed by engineer-incharge.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in Walls all floor level, etc complete as directed by engineer-incharge.

Providing Thermo Mechanically Treated bar (T.M.T.) (I.S.I. Mark) conforming to I.S. - 1786 Fe-500D CRS Steel including providing anticorrosive treatment to TMT bar with fusion bonded Epoxy coating at approved plant (including testing of coating as per relevant IS before bringing the coated bars on site) not less than 175 micron thickness and up to 300 micron to reinforcement bars as per IS-13620- 1993/ ASTM-775M. for R.C.C. work including transportation, bending, binding and placing in position complete at all floor level. Make of TATA, JSW,SAIL,VIJAG,RINL as directed. (below/above Plinth)

Providing, laying and constructing Brick work using common brunt clay building conventional bricks having crushing strength not less than 35 kg./sq.cm. in Foundation and Plinth in cement mortar 1:5 (1 cement : 5 sand) in true line and level including curing, scaffolding, racking out the joints etc. complete as directed by engineer in charge. Plinth Masonry

Providing, laying and constructing Brick work using common brunt clay building conventional bricks having crushing strength not less than 35 kg./sq.cm. above plinth upto all floor level in cement mortar 1:5 (1 cement : 5 sand) in true line and level including curing, scaffolding, racking out the joints etc. complete as directed by engineer in charge. Plinth Masonry

Providing material and labour for fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws, with Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS :2046 Type S, including cost of adhesive of approved quality 1.0mm Thick on both face, with Providing and fixing S.S. tower bolts (barrel type) with necessary screws etc 200mm long x10mm dia, with Providing and fixing S.S. Door Aldrop with necessary screws etc. 300mm long x20mm dia, Providing and fixing S.S. Door Aldrop with necessary screws etc 250mm long x20mm dia, with Providing and fixing S.S. Pipe Handle for door 45cm size on both side of Door shutter (i.e four nos. in double shutter door), with Providing and fixing S.S hanging type floor door stopper with necessary screws, etc. complete as directed by Engineer in charge. All S.S Shall be ASIS 304 Grade.

Supply of 35mm thick Fiber Glass shutter with 1.5 to 2.0 mm thick fire retardent grade FRP skin in wood grain rasied panel design having extra reinforcement on sides & edges & in polish design finish. The core of the shutter is to be filled up with injected retardent grade polyurethane foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole shutter is to be water proof ,weather proof, termite proof & resistance to mild acid/alkali with Providing and fixing S.S. tower bolts (barrel type) with necessary screws etc 200mm long x10mm dia, with Providing and fixing S.S. Door Aldrop with necessary screws etc. 300mm long x16mm dia, Providing and fixing S.S. Door Aldrop with necessary screws etc 250mm long x16mm dia, with Providing and fixing S.S. Heavy Door handles with screws etc 150mm long on both side of Door shutter, with Providing and fixing S.S hanging type floor door stopper with necessary screws, etc. complete as directed by Engineer in charge. All S.S Shall be ASIS 304 Grade.

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc .

Providing and fixing standard extruded of alluminium section of size 63 mm x 38.10 mm x 1.2 mm ( of Jindal Section No. 2434 @ wt 0.643 kg/rmt ) with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for ventilation.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut granite (Z-Black) work for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish, chamfer work etc. complete at all levels. Granite of any colour and shade, etc complete as directed by engineer-incharge

Providing 15 mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto all floor level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) and necessary curing, scaffolding, in true line and level etc. complete as directed by Engineer in Charge.

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto all floor level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) including floating coat of neat cement slurry and necessary curing, scaffolding, in true line and level etc. complete as directed by Engineer in Charge.

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing cement vata ( 10 cm x 10 cm size ) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. complete as directed by Engineer in Charge.

Providing throating or plaster drip and moulding to RCC projections as directed by Engineer in Charge.

Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness, nailed to the under layer with rust proof screws and nails and finishing the groove complete to all floor level as per specifications and direction of the Engineer-in- Charge.

Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand (Asianpaint,Berger,Nerolac) and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint of Asianpaint Apex Ultima for wall of approved brand of Approved colour and shade on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc including Applying two coat of Exterior primer on new surface etc. complete as directed by Engineer in charge

Providing, laying and fixing matte or Rustic Vitrified heavy duty 9.5 mm thick antiskid tiles flooring, laid on bed of 20mm (Average) base of Cement Mortar 1:6 (1-Cement : 6 Coarse Sand) on new surface and jointed with colour cement slurry including finished with flush pointing & cleaning the surface etc. completed of any shade approved by Higher Authority of approved brands like Somani ,Rak, City, Sun Heart,Marbito etc. of approved size (30X30cm) as directed by Engineer in Charge.

Providing, fixing & laying Digital 60 x 30 cm Full Body Glossy, matte or Rustic Ceramic Ultima Digital 8 mm to 9 mm thick tiles ,skirting,dado laid on bed of 15 mm (Average) base of Cement Mortar plaster of 1:4 (1-Cement : 4 Coarse Sand) on new surface and jointed with colour cement slurry including finished with flush pointing & cleaning the surface etc. completed of any shade approved by Higher Authority of approved brands like Somani ,Rak, City, Sun Heart,Marbito etc as directed by Engineer in Charge.(Cost including 15mm thick 1:3 cement mortar plaster)

Providing and laying Mirror polished green Kota Stone Slab flooring,dedo or skirting over 20mm ( average )thick base of cement mortar 1 : 6 ( 1 cement : 6 Coarse sand ) or L.M 1:1.5 laid over and jointed with grey cement slurry including rubbing and polishing etc. complete of approved colour and shade as per the drawing provided by the architect. 25mm Thick(GSR:14012A+ Mirror Polished (MR-120 Sqmt),)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered including fixing accessories such as nuts, bolts, fasteners etc.).

Providing material and labour for construction of Kitchen Platform made from Black Granite (16mm to 18mm thick) in top of kitchen platform rested on black kadapa stone (av.30mm thick) supported on sandwiched vertical supports of Kadapa Stone bottom of granite stone for base of platform, at required distance or as directed by Engineer-in-charge. One side vertical granite stone in geometrical shape, front granite stone patti for fascia work as well as horizontal boarders including molding and mirror polishing by hand grinder to all exposed black granite edges and providing opening of required size and shape of kitchen sink in granite and kadapa stone in line and level. The vertical supports of kadapa stone sandwiched/ gap fill up with cement mortar 1:1 and cement slurry and the granite stone vertical side and patti etc with adhesive material like Araldite etc complete as directed by Engineer-in-charge.

Providing Material, Labour and equipments for Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thickjointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : including Khurra & Gola work With average thickness of 120 mm and minimum thickness at khurra as 65 mm, etc complete as directed by engineer-incharge.

Providing and fixing M.S. grills/railings of required pattern to Alluminium/wooden frames/or Marble Frame of window/balcony/staircase/passage etc. with M.s. flats/ square hollow pipe at required spacing and frames all-round, square or round bars fixed with round headed bolts and nuts or by screws, including oil painting with one coat of primer of approved quality and brand & two coats of synthetic enamel oil paint etc. complete as per detail drawing and as directed by Engineer in charge.(B) Plain grill/railing

Providing Material, Labour and equipments for Making soak pit 2.50 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. etc complete as directed by engineer-incharge. With Brick work using Conventional common burnt clay building brick having crushing strength not less than 35 kg/sq.cm in cement mortar of 1:5 (1 Cement : 5 Sand) etc complete as directed by engineer-incharge.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [B] 20 mm. (Make: Astral, Prince, Supreme, Finolex)

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm.

Providing laying and jointing in true line and level 160 diameter U.P.V.C. SWR Type B pipe PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as approved by Engineer in-Charge & conforming to IS 13592-1992 with one end plain and other end socketed with rubbering, & fitting conforming to ISI 14735-1999 of approved make for Horizontal drainage line below ground level, including necessary fittings such as bends, tees, rubber packing ring etc. testing of pipeline, jointing with adhesive solvent cement including cost of excavation,lowering and laying pipes, refilling the trenches, jointing materials and all other necessary fixtures fitted, air and water tight testing of the line etc. complete as directed.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 PVC pipes of make PRINCE/SUPREME/ASTRAL/FINOLEX or equivalentas approved by Engineer in-Charge & working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor. 110 mm Dia

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 PVC pipes working pressure polyurethane pipes of the following outside Dia.PRINCE/ SUPREME/ASTRAL/ FINOLEX or equivalent Low density, complete with special flange compression type fittings, wall clips etc. including making good the wall ceiling and floor. 75 mm Dia

Providing & filling Brick bats chhara in sunken floors including watering, consolidating, ramming etc complete.

Construction of brick masonry chamber inside dimension as below & required depth for drainage pipeline, with required inlet and outlet for under ground C.I. inspection chamber and with 230 mm thick brick wall having crushing strength not less than 35 Kg. /sq.cm. in C.M.1:5 (1cement : 5 sand) C.I. Cover with frame(Light duty 455 mm X 610 mm internal dimension, total weight of cover with frame not less than 38 Kg. ( weight of cover 23 Kg and weight of frame 15 Kg),R.C.C. top slab with 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size B.T. Kapchi) foundation concrete 1:2:4) (1 cement : 2 sand :4 graded stone aggregate 40 mm nominal size) inside plaster 15mm thick in cement mortar 1:3 (1cement : 3 sand ) finished smooth with floating coat of neat cement slurry on walls and bed concrete curing etc. in true line and level/slope etc. complete as directed by Engineer In charge.Inside dimension 455 mm x 610 mm and 450 deep or more for pipe line with one or two inlets as directed by Engineer in Charge.

Providing and fixing Urinal or approved quality including conecting the Urinal with waste pipe , tap etc. complete.(A) White earthenware flat back or corner type size 430mm x 260mm x 350mm., including painting of fittings and cutting and making good the walls and floors wherever required, complete as directed by engineer-incharge. (Make Hindware, Cera, Jaquar)*.

Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (A) vitreous China Pattern :(i) in white colour and plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. White plastic seal and cover, 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet Vitreous China (I) In white colour (Make Hindware, Cera, Jaquar)*.

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (A) Vitreous China.(I) Long pattern = White colour and fixing 100mm size P or S trap for water closet squatting pan including jointing the trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China. and fixing in Cement Mortar 1:3 (1-Cement : 3-coarse sand) with chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(ii) 25mm dia, etc complete as directed by engineer-incharge.(Make , Hindware, Cera, Jaquar)*.

Providing and fixing 15mm dia. Angle cock make such as Cera,Hindware,Jaquar with capstan head,screw down high pressure with screw, shank, and back nut, including fixing in pipeline etc. complete as directed by Engineer In charge. '

Providing and fixing C.P. brass Heavy duty bib cock with cap of approved quality conforming to IS standards. 15 mm nominal bore, with all fittings, etc complete as directed by engineer-incharge. (Make Jaquar, Kohler, Roca, Cera, Hindware, )*

Providing and fixing 50mm dia. gun metal check or non return full way wheel valve in pipeline of approved quality etc. complete as directed by Engineer In charge.

Providing & fixing 50mm dia & 30cm length G.I. rainwater spout including making hole and fixing in proper slope and required pattern fixed in cement mortar 1:1 (1 cement : 1 sand) etc. complete as directed by Engineer In charge.'

Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 75 mm diameter with jali of the following nominal diameter of self cleansing design with C.I. Scread down or hinged grating including the cost of cutting and making good the walls etc. as per the approval of Engineer in charge.

Providing and fixing wash basin Cera,Hindware,Somany (550x400 mm ) counterfit Cera/ hindware , including 40 mm dia C.P. brass waste, 40 mm dia waste pipe, 15mm dia flexible pipe and rubber plugs etc. complete as directed.

Providing and fixing C.P. brass Heavy Duty Swan Neck Type Pillar cock with Raised ‘J’ Shaped Swinging Spout (Table Mounted Model)}of approved quality conforming to IS:Standards : 15 mm nominal bore (Make Jaquar, Kohler, Roca, Cera, Hindware)*

Providing and fixing 2 in 1 Bib tap 15 MM, of Cera/Hindware/Jaquart capstan head, screw down high pressure with screws, shanks and back nuts etc. as per the approval of Engineer in charge.

Providing & fixing 600 mm X 450 mm beveled edge mirror Cera,Hindware Or Equivalent of superior glass mounted on 6 mm thick AC sheet or plywood sheet and fixed to wooden plugs with C.P.brass screws and washers, including fixing C.P. brass bracket support and guard rail fixed to wooden plugs with C.P. brass screws etc. complete as directed by engineer In charge.

Providing and fixing 600 mm X 200 mm size C.P. brass towel rail Cera,Hindware Or Equivalent complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws etc. complete as directed by Engineer In charge.

Providing and fixing PTMT soap Dish Holder Cera,Hindware Or Equivalent having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms etc. as per the approval of Engineer in charge.

Providing and fixing Stainless steel A ISI 304 ( 18/8) kitchen sink ( NIRALI BRAND ) as per IS 13983 with CI brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510 x 1040 mm bowl depth 225mm as directed by Engineer in Charge.

providing and fixing double coated syntex or equivalent PVC (ISI) mark water tank of required capacity each with al necessary fitting & connection etc Comp. on terrace as directed by Engineer in Charge.

Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings :Size 600x450x200 mm as directed by Engineer in Charge.

Providing and fixing C.P. Brass Shower rose make of Cera, Hindware, Jaquar with 15mm or 20mm inlet. (A) 100mm dia as directed by Engineer in Charge.

Providing and fixing 2 in 1 Mixture Cock make of Cera, Hindware,Jaquar with 15mm or 20mm inlet. as directed by Engineer in Charge.

Providing carbon dioxide type fire exit 4.5 KG capacity with ISI mark etc. as directed by Engineer in Charge.

Providing dry chemical powder type fire extinguishers of 5 kg/Capacity with ISI mark (IS 2171) etc as directed.

Forming groove/patta/plaster band of uniform size in the top layer of washed Sand plaster of (15 -30)Cm wide and 20 mm thick on finish Exterior surface as per approved pattern and finishing the groove complete as per specifications and direction of the Engineer-in-charge.

Providing and fixing shower seat of standard make as per following specification. • Stainless steel 304 grabe • Pipe OD-1 inch • Seat dept- 400 mm • Seat width – 500 mm • Seat height – 470 mm • Plate thickness – 2 mm • Anti-skid floor flanges of 6 mm OD and 5 mm thickness with rubber gasket • Argon welding (GTAW), perfect right angle • Matt finish • Designed to promote independent transfer by user from wheelchair also Can sustain weight upto 200 kgs. as directed by Engineer in charge.

Providing and applying Bondvoll's NATURA synthetic texture plaster of average thickness 18 mm consisting of 12 mm thick smooth mala plaster in cement mortar 1:3 (1 cement : 3 fine sand), natura primer coat, natura stone texture and natura clear coat with necessary grooves, curing etc complete for all heights as per the pattern given by the architect and as instructed by the engineer-in-charge.

providing and Health Fauset Heavy duty with hook with fittings etc. of standard make as directed by engineer in-charge.

Providing and laying heavy duty (90 micron) HDPE (Plastic) sheet below plinth slab (P.C.C)/ top slab as specified with all labour charges and materials etc. complete as directed by engineer in-charge.

Providing and applying two component acrylic polymer modified cementitious elastic waterproof coating (make SG Globlastic or equivqlent) for concrete and masonery surface used for multiple application (2 or more coat) for water proof including cleaning of surface, paint, dirts etc, mixed with two components throughly to a uniform paste and apply it on the wet concrete surface with brush and slurry should be apply within 20 minutes as specified with all labour charges and materials etc. complete as directed by engineer in-charge.

Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S code

Providing and Applying Multi-Color craft / art painting using Acrylic and/or Enamel Paint. The width of the craft / art pattern painting shall be 250mm to 300mm (10" to 12") wide of any line thickness. The specification shall be conforming to the Ayushman Bharat Scheme of MoH&FW. It also includes, scrapping, brushing, and levelling the wall surface if required using cement putty / plaster of paris, etc.

Providing and Applying Multi-Color Illustrative painting using Acrylic and/or Enamel Paint. The size of the Illustrative painting shall be 600mm (24") dia circular and/or 600mm x 600mm ( 24" x 24") square of any line thickness. The specification shall be conforming to the Ayushman Bharat Scheme of MoH&FW. It also includes, scrapping, brushing, and levelling the wall surface if required using cement putty / plaster of paris, etc.

Providing and Applying Multi-Color Text painting using Acrylic and/or Enamel Paint. The width of the Text painting or height of the Text shall be 300mm to 450mm (12" to 18") wide of any line thickness. The specification shall be conforming to the Ayushman Bharat Scheme of MoH&FW. It also includes, scrapping, brushing, and levelling the wall surface if required using cement putty / plaster of paris, etc.

Providing and Applying Multi-Color Illustrative / Logo painting using Acrylic and/or Enamel Paint. The size of the Illustrative painting shall be 900mm (36") dia circular and/or 890mm x 660mm (35" x 26") rectangle of any line thickness. The specification shall be conforming to the Ayushman Bharat Scheme of MoH&FW . It also includes, scrapping, brushing, and levelling the wall surface if required using cement putty / plaster of paris, etc.

Providing material and labour for fixing G.I. hexagonal chickenmesh of size 20mm x 20mm of 25 gauge at junction of concrete and brick work or between different materials after making "V" grove between two different material surface and filled with rich cement mortar and @ 100mm on each side of surfaces including necessary "U" nails/ screws/ washers with cleats for fixing, overlaps, curing, scaffolding etc complete for all floors/ all levels/ all heights/ all shapes as per direction of Engineer-in-charge.

RAINY FL300 Make Rain water Filter for roof top water covering, Roof area upto 350 Sq.mtrs max intensity of rainfall 75 mm/ hr, capacity 340 LPM filter element ss304 screen, inlet 110mm and outlet 90mm, Operating Pressure less than 2 feet, Source of power-gravity including providing and fitting wall mounting.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 (1 cement : 5 fine sand) C.I. cover with frame (Light duty) 1200mm x 1200mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) or (R.C.C. top slab with 1:1.5:3 mix (1-cement :1.5- coarse sand :3-graded stone aggregate 20mm size) with 10mm dia bar of spacing 10cm, foundation concrete 1:1.5:3, inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions 1200mmx 1200mm and 1200mm deep for single or double pipe line..(As Directed by Engineer in Charge ).

"FARMSON " Approved design Infusion Well system with boring and precast chamber and filtration: - Drilling of bore well of 200 mm dia, depth 500 Max. - Providing and installation of 150 mm dia density 6 kg ISI DVC pipe, including fitting -up to 200 feet max. -Earth work -digging the well 1700 mm dia up to 3.4 mtrs deep including providing and fitting -1 No. -Providing and Installation of reinforced cement concrete precast module of 1.5 mtr dia and 3.4 mtr heightincludin g fitting -1 job. - Providing and Installation of v -wire SS 304 double filtration screen set of 8" dia.

Supplying of single phase submersible pump set suitable for 100 mm size or more dia bore well having motor capacity and discharge as under with necessary panel box Motor rating 2 HP (17 stage) pump having capacity of 106 LPM at 40 mtr head suitable for 32 mm dia. delivery pipe.

Providing and supplying in standard length ISI mark high density polyethylene H.D.P.E. Pipes suitable for portable water as per IS specification no. 4984/1995 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the department stores etc. 10.0 Kg/Cm2 50mm Dia HDPE Pipes

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing & erecting open well type horizontal mono block pump set with stainless steel body having following specification 1 H.P. single phase open well motor pump set suitable for 185 LPM discharge @ 25 mtr. head, suitable for 32 mm dia. Delivery pipe with control panel.

Supplying and erecting Direct - On - Line Starter with 18 A. rating contactor and with 3.5 Amp. 18A range directly operated in totally insulated elegant enclosure for single phase operation up to 3 HP as per IS 13947 complete erected on P.W. Block with necessary connection.

Supplying and filling in plinth with Sand and/or Unscreen Gravel under floors, including watering, ramming, consolidating and dressing complete.

Providing and fixing POP work of 25mm to 40mm thick on inner wall/ceiling upto any height from ground level in proper line and level to give smooth finishing including all material and labour cost with all arrangement to work any height etc.complete as directed by engineer in-charge.

Providing Material, Labour & Equipment for Compound Gate in Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) sections confirming to IS 4923-1997 etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete, with Hot finished seamless type tubes, including all Hinges, Castor Wheel, Aldrop, Fixtures and Fasteners, etc as approved by engineer-incharge. The Design of Compound Gate shall be as per Engineer-incharge specification.

Applying priming coat over new steel and other metel surface after and including preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. Painting two coats on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter.

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth, etc complete as per the direction of Engineer-in-charge

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-II (size range 53 mm to 0.075 mm ) etc complete as per the direction of Engineer-in-charge.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.

Providing and laying C.C. pavement of controlled cement concrete M250. The concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush and making groove joint and filling it with filler material as specified by engineer-incharge h etc. complete as per specifications and directions of Engineer-in-charge.

Providing and laying Cement Mortar 1:3(1-Cement: 3- fine sand ) (upto 10 ton) complete as directed by engineer-incharge.

Providing & laying weep hole in Aburtments, and returns by using A.C. pipe of 100mm including laying in proper grede and jointing the completed as per detailed specification.

Providing and fixing precast cement concrete Jali/Precast cement concrete Poles/Decorative Balustrade of approved design of 50mm to 100mm dia 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc.(50mm to 100 mm thick) complete including baluster interlocking plate of cement mortar 1:3 (1 cement: 3 coarse sand) top and bottom of baluster in proper line and level all complete ( excluding plastering of the jambs, sills and soffits. (As directed by Engineer in charge)

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Sub Estimate -II - Electrification work. Point wiring for Light / Bell with 2-1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 KV grade FR PVC insulated multi strand copper wires, in following type of pipe to be erected concealed in / on surface on wall / ceiling complete with 6 A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on/ in wall / ceiling as per pipe erected, with necessary Lamp holder / ceiling rose / H.D. Connector as directed. in existing pipe. (Cat-III)

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm. (green) both are of ISI marked 1.1 KV Grade FR PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall / ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC/Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on/ in wall / ceiling as per pipe erected, with necessary ceiling rose / H.D. Connector as directed. in existing pipe. (Cat-III)

Providing following type of Modular Type Accessories mounted with pvc / metallic box covered with appropriate front plate modules erected with necessary connection. As desired by Engineer In charge. One No. SP 6 Amp. (Cat-III)

One No. 5 pin plug.(Cat-III)

Blank plate single.(Cat-III)

16 Amp. SP one way switch.(Cat-III)

6/16 Amp. Universal socket.(Cat-III)

6A/10A/16A/20A/25A/32A Double Pole Modular MCB Switch.(Cat-III)

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed. 20 mm.

Mains with 1.1 KV grade FRPVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in / flushed on wall/ ceiling, with 1.5 sq. mm. copper conductor FR PVC insulated stranded wire of green colour for earth continuity of following size. (e) in existing pipe. 2 wire 2.5 sq. mm.

Main with 1.1 KV grade FR PVC insulated ISI marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FR PVC insulated stranded wire of green colour for earth continuity of following size. (e) in existing pipe. 4 wire 6 sq.mm.

Miniature circuit breaker single pole 6A to 32A. Suitable to operate on 240V. A.C. system and having breaking capacity 10 KA to be erected in existing box. Confirming to IS 8828 / 1996 with ISI Mark.(Cat-III)

Providing & erecting 240V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS: 8828 in existing box having following capacity. 6 to 32 Amp.(Cat-III)

Supplying & erecting 20 Amp. 10KA. ‘C Curve’ single pole MCB with 20 Amp. plug socket, company fabricated powder coated sheet enclosure erected as directed with connection. Metal Clad Socket with Metal clad top.(Cat-III)

Providing and erecting four pole MCB isolator A.C. 22 duty confirms to IS 13947-3 in existing box. for 63 Amp.(Cat-III)

Plastic enclosure fitted with DIN rail suitable for incorporating One / Two nos. MCB.

Plastic enclosure fitted with DIN rail suitable for incorporating Three / Four nos. MCB.

Providing and erecting Sheet Steel powder coated MCB distribution board – flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 with out MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used). Three phase 4 way SS Double door for single phase outgoing horizontal box.

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB / Transformer, LT panel board, Motors etc. using copper clamp.

Providing and erecting Annealed bare Copper wire 8 to 16 S.W.G

Supplying & erecting earth pit of minimum bore dia. 150mm size, approved make Safe Earthing Electrode consisting Pipe-in-pipe Technology as per IS 3043-1987 made of corrosion free G.I. Pipe having Outer pipe dia of 50mm having 80-200 Micron galvanizing, Inner pipe dia of 25mm having 200-250 Micron galvanizing, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. For electrical installation up to 440 V in normal soil Length of pip: 1 Mtr. Back filling compound – 1 Nos. Bag of 15 Kg.

Meter cover made from multi chamber hollow PVC sections of 20mm thick having all the corner joints with PVC solution angles without using any screws, nails shutters having required size of eye glass and with necessary locking arrangement hinged with box. The back of meter box should be fixed with timber. Hold fast for holding screws or nut bolts.

Supplying and erecting nuwood 12mm thick on existing angle iron frame or wooden patti.

Supplying & erecting XLPE (IS: 7098) (I)-88 ISI marked unarmoured Aluminium cable 1.1 KV grade to be erected as directed of following size. 3 core 2.5 Sq. mm.

Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 4 core 16 Sq. mm.

Marking trench in soft soil of suitable width of 90 cms. Deep for laying cable or locating the fault all over the run and back filling the same and making the surface as normal ground.

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene (conforming to IS 14930 II) with necessary connecting accessories of same material at required depth for laying of cable. Below ground / road surface for enclosing cable and backfilling the same to make ground as per original. 50 mm. dia.

Providing and fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. 2 to 4 core 16 Sq. mm.

Solderless crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 16 Sq. mm.

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 230 V. 50 Cys. 1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing [ Make shall be approved by Engineer in charge]

Providing & erected fresh air fan 250 mm dia with square frame make of ABS body with louvers. (Cat-II)

Providing window frame suitable for erection of exhaust fan complete covering the remaining portion of window with 15mm. thick plywood and colour washing to match the colour washing to match the colour of the wall.

Providing street light pole bracket consisting of Light class M.S. pipe of 4.2 cms. outside dia. complete with suitable M.S. sleeve tubing of approximate. 45 cms. And length suitable for 76.5mm. / 80 mm or require size pole top having sufficient. fastners for fixing the brackets and having spread of 1 .mtr. length with suitable rise as per site condition & suitable welded stiffner, reducer and nipple with check nuts complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint with following nos of arms. Single Arm bracket 1 Mtr.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V, Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt , LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates). (A) Tube Light with integral/ non-integral driver. 16-18 Watts, Surge - 4KV, IP-20, 4 feet. (Cat-III)

(B) LED Lamps integral type, cool white with PC diffuser suitable for B22 LAMP holder. 2 to 3 watts. (Cat-III) Make:Wipro, Havells, Philips, Bajaj, Surya, HPL.

(C) Square/ circular surface/ Recessed Mounted Downlight with provision for spring loaded mounting clips complete. 10-15 Watts, Surge-4 KV. (Cat-III) Make:Wipro, Havells, Philips, Bajaj, Surya, HPL.

Supplying and erecting LED street light/ Flood light fitting with high power white LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more the 130 Im/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coasted and Polycarbonate optics/ lenses with company mark/ name engraved or embossed 120 to 300V, Power Factor more than 0.95, THD < 10% CCT 5000 K to 5700k, Uniformity ratio > 0.45, luminaire efficacy>85 Lumens/ watt. LED driver efficiency > 85%. CREE/ OSRAM/ PHILIPS Lumileds / NICHIA/ SEOUL/ Bridge Lux (U.S.A.) make LED used for luminaire. (Each fittings required LM-79 & LM-8- certificates) (A) Street Light (IP-65), Surge -4KV. Above 24 watts to 36 Watts. (Cat-III)

Service Connection charges.

Providing, suplying and installing Hikvision 3.6 mm 2MP Dome CCTV Camera • 2MP High Performance CMOS • 120dB WDR • 3.6 mm fixed focal lens • 20 Mtr IR Distance • 2 MB , 1920 x 1080p Resolution • 24 hours colour view • Day and Night Colour • 4 in One Video Type Switchable (TVI, AHD,CVI/CVBS) • IP67 complete.(Cat-III)

Providing suplying and instaling Hikvision 8 Channel 2Mp HD DVR + 1 TB Hard Disk Drive • HD-TVI/Analog/AHD self-adaptive interfaces input, • 8-ch video& • 4-ch audio input, • 1 SATA interface, • CH01-02 : SUPPORT 3MP @ 15FPS, • CH 03-08 : SUPPORT 2MP @ 15FPS, • H.265 Pro+/H.265 Pro/H.265/H.264+/H.264 • 32 Kbps to 6 Mbps • Main stream: When 1080p lite mode not enabled: For 4 MP stream access: 4 MP lite@15 fps; 1080p lite/720p/WD1/4CIF/VGA/CIF@25 fps (P)/30 fps (N) For 3 MP stream access: 3MP /1080p/720p/VGA/WD1/4CIF/CIF @15 fps For 1080p stream access: 1080p/720p@15 fps; VGA/WD1/4CIF/CIF@25 fps (P)/30 fps (N) For 720p stream access: 720p/VGA/WD1/4CIF/CIF@25 fps (P)/30 fps (N) When 1080p Lite mode enabled: 4 MP lite/3 MP@15 fps; 1080p lite/720p lite/VGA/WD1/4CIF/CIF@25 fps (P)/30 fps (N) Sub-stream: WD1/4CIF@12 fps; CIF@25 fps (P)/30 fps (N)

Cabling with Cable, • Hikvision Coxial Cable 3 + 1 • BNC Connectors • Camera Mounting Box • Laying of Cable , Connecting • Camera Installation

Providing 4 U Metal Shelving Rack for DVR. • 2 x power socket • Secured with lock • Mounting and Installation

Providing, supplying and instaling 8 Channel Power Supply • 12V DC output • 5Amps

Providing, supplying and instaling 24” LED Monitor with VGA and HDMI Input • LED Screen Type • 19.5 Inch Full HD • 1080p resolution • VGA input. Make:- Samsung, LG, .

Supplying and erecting LED indoor fittings with LEDs of wattage 5 Watt to 8 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %,CCT 4000 K to 6500K, Uniformity ratio >0.7,Luminaire efficiency> 85 lumens/watt ,LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates). LED Lamps integral type,cool white with PC diffuser suitable for B22 LAMP holder 5 to 8 watts. Make:Wipro,Havells,Philips,Bajaj.(As directed by Engineer in charge).

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (b)40 Amp. (Cat III) Make:Legrand/Havells/anchor (As directed by Engineer in charge)

Providing Modular Type Accessories with 16 Amp SP one way switch & 5 pin 6/16 Amp Universal socket mounted with pvc /metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection.Make of switch and board: Havells/Anchor/Legrand/L&T (As directed by Engineer in charge)

Hitendra A Patel