REPAIR TO JOINERY, ROOF, PLINTH PROTECTION, SANITARY FITTINGS, PLASTERING AND SUNKEN FLOOR OF ZONE IV AT UMROI MIL STN UNDER GE UMROI

Amount

Taking down chowkats or frame exc 1.50 sqm but n.exc 4.00 sqm with shutters (without taking off shutters from the frame), complete all as specified and directed.

Taking down chowkats or frame n.exc 1.50 sqm with shutters (without taking off shutters from the frame), complete all as specified and directed.

Taking down shutter of any description exc 1.00 sqm but not exc 2.00 sqm each, complete all as specified and directed.

Refixing of shutter in same opening after repairing complete area exc 1.00 Sqm but not exc 2.00 Sqm, complete all as specified and directed.

Material & labour for 2nd class hard wood, plain, solid straight chowkats and frames worught, framed, rebated on the solid rounded of chamferred, put together with glue, pinned at joints supplied and fitted, complete all as specified and directed.

S&F pressed steel door frame 125x60 mm with one or more rebate including necessary fixing lugs hings, lock strick etc, complete all as specified and directed.

S&F pressed steel door frame 105x60 mm with one or more rebate incl necessary fixing lugs hings, lock strick etc, complete all as specified and directed.

Material & Labour for PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in filling of pressed steel frame, complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

M&L for 35 mm thick 2nd class HW factory made glazed and skelton shutter, open rebated and prepared to receive glass, gauge, etc (without sash bars) , edges of framing plain, chamfered of rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkhats, complete all as specified and directed.

M&L for 35 mm thick 2nd class HW factory made plain framed panelled shutter (two panels) with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS:1003(Part-I), klin seasoned and chemically pressure treated, complete all as specified and directed.

M&L for 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F aluminium powder coated [Minimum 50 Micron thick] anodised aluminium sliding frame and shutter for windows/ventilation with 92 mm x 31.75 mm x 1.5 mm thick three track section for frames and 40 x 18 x 1.50 mm thick sliding section for shutters of both gauzed and glazed with 4 mm thick tinted glass, aluminium Deco Grill of Model / Design No. DG 104 and stainless steel wire cloth [0.63 mm nominal dia and avg width of aperture 1.40 mm] including necessary jointed, cleats powder coated glazzing clips, powder coated aluminium snap beadings, screw and aluminium fittings, suitable handle, complete all as specified and directed.

Supply and Fix anodised powder coated (minium thickness 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

Supply & Fix powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters (sliding type), aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and as directed.

M&L for 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane or aluminium beads fixed to steel etc complete all as specified and as directed.

M&L for 4mm thick figured glass, n.exc 0.50 sqm each pan, pin headed type and glazing with oil putty or aluminium beads fixed to steel etc, complete all as specified and as directed.

M&L for prelaminated particle board 18/19mm thick as in cup board shutter and shelf interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame works, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.

Material & labour for preparation of new wooden surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Material & labour for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer , complete all as specified and as directed.

S&F stainless steel wire cloth , 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples , complete all as specified and as directed.

S&F aluminium alloy handles size 150mm fabricated type anodised , complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt 200mm size of extruded section and fixed , complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt 150mm size of extruded section and fixed , complete all as specified and as directed.

S&F 300mm long aliminium alloy ,anodised sliding door bolt with hasp and staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast alunimium alloy and fixed , complete all as specified and as directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed , complete all as specified and as directed.

S&F 100 mm hasp and staples of alunimium anodised, safty type including bolt to hinges plate and fixed with screws , complete all as specified and as directed.

Material & labour flat iron mild steel for hold fast size conforming to Fe-410-0 or Fe-310-0 , complete all as specified and as directed..

S&F repair helical door spring 300mm long incl roller and roller plate , complete all as specified and as directed.

S&F in repairs tubular 20mm curtain rod chromium plated , complete all as specified and as directed.

S&F in repair brackets chromium plated for curtain rod in any size complete all as spd and dir.

Supply & Fix in repairs PVC low level flushing cistern , white , 10 ltrs capacity with float valve and brackets complete including fixing low level flush pipe after dismantling of old unserviceable existing flushing cistern complete all as specified and directed.

S&F in repairs vitreous china 530x420x295 mm,"ORISSA PATTERN" with 'P' or 'S' trap size squatting white smart pan (Exclusive flushing cistern and flush pipe) incl foot rest complete and including cement concrete bedding, complete all as specified and as directed.

Supply & Fix in repair Vitreous china wash hand basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted /erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 including taking down unserviceable wash hand basin and connected items of any description, complete all as specified and as directed.

Supply & Fixing in repair vitreous china washdown water closet pan (pedestal pattern) white including seat and cover with connected to 'P' or 'S' trap complete all specified and as directed.

Cleaning of water tank capacity of 500 Ltr and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc, complete all as specified and as directed.

Cleaning of water tank capacity of 1000 Ltr and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc , complete all as specified and as directed.

Cleaning of water tank capacity of 2000 Ltr and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc , complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc , complete all as specified and as directed.

M&L for 15mm thick rendering in CM (1:4) in two layers mixed with water liquid water proofing compound as per manufacture instruction in top layer 5 mm thick finishing the surfaces with fair and even without using extra cement of any description including racking out joints for key scrubing with water complete all as specified and directed. Note: Liquid water proofing compound of Make - Conplast WL,Sika,Dr.Fixit measure separtely.

Supply only integral WPC ( Integral waterproofing liquid admixture for cement mortar) and application as per manufacture instruction , complete all as specified and as directed. Make - Conplast WL,Sika,Dr.Fixit

M&L for rendering 15mm thick in cement mortar (1:6) internal surfaces on other than fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for preparing surfaces of newly plastered on walls and applying two coat of distemper oil emulsion including internal wall putty 1.5mm thick whiting preparatory to distempering complete all as specified and directed.

M&L for preparing surfaces of newly plastered on walls and ceiling and applying two coat of acrylic smooth exterior paint including 1.5mm thick external wall puty oil emulsion including chalk whiting preparatory to distempering complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, walls etc, laid , bedded and pointed in any mortar, complete all as specified and directed.

M&L for Green Marble 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

M&L for joint free non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exc. 0.18 sqm but n exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, , complete all as specified and as directed.

M&L for joint free non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exc. 0.18 sqm but n exc 0.38 sqm, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, , complete all as specified and as directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match , complete all as specified and as directed.

Supply & Fixing of glazed ceramic coloured /printed tiles 350x250x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match on verticle surface of wall complete all as specified and as directed.

M&L screed bed or bedding laying of cement mortar (1:6) 15 mm thick for as in floor finishes, complete all as specified and as directed.

M&L backing coat of cement mortar 1:4 10 mm thick for as in vertical surfaces such as skirting , dados etc, complete all as specified and as directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc, including cleaning or refixing or removal to store complete all as specified and as directed.

Supply & Fixing of PVC (SWR) pipe 110 mm bore single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

Supply & Fixing of PVC (SWR)110mm bore bends any radius, complete all as specified and directed.

Supply & Fixing of PVC (SWR)110mm bore junction single (single T), complete all as specified and directed.

M&L sunken treatment of Toilet/Bathroom as in following steps: i) Top of RCC slab in sunken portion including peripheral beams shall be plastered with 15mm thick in cement mortar 1 : 3 using approved water proofing compound @ 3% by weight of cement finished even and smooth using extra cement, curved at the junctions. ii) Apply two coats of epoxy resin/polymer modified cementations coating like brush bond of FOSROK/SIKA/Pedilite or equivalent, both on floor & beams. iii) Sunken slabs to be given 1:20 slope outward 25mm GI pipe spout with 300 mm projection beyond outer surface of wall shall be provided. iv) Water tightness of sunken portion to be tested by ponding with water for 72 hours. In case of even a slight mark of seepage, the portion to be treated and ponding shall be carried out again to confirm the water tightness of sunken slab. v) The sunken portion will be filled with lean concrete 1:5:10 type E2 using brick aggregates to required depth. Note : No cutting in roof slab/beam shall be allowed for passing of CI pipes & fittings.The stage of water proofing to sunken slab shall be passed by Eng-in-charge/GE.

Demolition of cement concrete of any dsecription and in any position not otherwise specifically provided for etc, complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C1 using 20 mm graded aggregate as in plinth protection finished fair and even with using extra cement , complete all as specified and directed.

S&F in repairs 15 dia fancy type chromium plated Bib tap cast copper alloy etc complete all as specified and as directed.

S&F in repairs of stop valve 15 mm dia CP fancy type, with long shank and cup (concealed type) cast copper alloy, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs of stop valve 15 mm dia CP fancy type, with long shank and cup cast copper alloy, screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply & Fix in repair 15mm bore dia pillar taps, fancy type chromium plated with capstan heads chromium plated screwed down high pressure, with or without lettered 'hotor cold' with long screwed shank and fly nuts screw for iron pipe complete all as specified and as directed.

S&F in repairs Shower Rose 125mm size Chromium plated with swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S & F in repairs Brass chromium plated tubelar towel rail, 20mm dia, D type, 60,cm long between flanges complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls etc complete all as specified and as directed.

Taking up or down steel tubing 15mm bore and connections including cleaning for refixing or removal to store complete all as specified and as directed.

S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and as directed.

Schedule of Credit

M/S C.M.V CONSTRUCTIONS

M/s Eddy Constructions