Tender ID

Himachal

Technical Eval

Works

Civil Works

/R and M/O various Type -I to Type - VI GAD Qtrs at Kasumpti Shimla - 9

Public Works Department

Shimla, Himachal Pradesh

Amount: Refer DocsCloses: 4 Apr 2026Closed

Timeline

Published27 Mar 2026
Closed4 Apr 2026
Technical Evaluation9 Apr 2026
Award—

Bids

2 Bids9 Apr 2026

#	Company	Status
1	AVTAR SINGH Accepted-Technical	Accepted-Technical ok
2	KUSHAL GANGTA Accepted-Technical GANGTA NIWAS KUFTADHAR TEHSIL DISTT SHIMLA H P \| SHIMLA \| SHIMLA \| HIMACHAL PRADESH \| 171002	Accepted-Technical ok

Tender Value

Refer Docs

EMD Value

₹4,300

Closing Date

4 Apr 2026, 10:00 amClosed

Tender Inviting Organisation

Name

Executive Engineer kasumpti Division HPPWD Shimla3

Address

Executive Engineer kasumpti Division HPPWD Shimla3

Work Description

Covering of balcony of Type - III set No 133 under Kasumpti section

Tender Information

Tender ID

2026_PWD_132569_3

Reference Number

SD-I-CTR-Tender-2025- 27762 dt 24-03-2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

30 days

Location

Shimla

Source Website

Subscribe to view

Eligibility / Pre-Qualification

AS per SBD

Documents Required

12 documents required · 12 mandatory

Fee/PreQual/Technical

RequiredCost of Tender Form On line (.pdf)

RequiredEarnest Money Deposit on line (.pdf)

RequiredContractor registration IN APPROPRIATE CLASS (.pdf)

RequiredGST registration and PAN No (.pdf)

RequiredWork in hand certificate (As per Performa given in General rule No.16 ). (.pdf)

RequiredMachinery tools and plants (As per schedule F with reference to clause 18 (.pdf)

RequiredForm No. 7/8 duly signed (.pdf)

RequiredThe Contractor Shall give affidavit regarding List of both gazette and non gazette HPPWD Employees (.pdf)

RequiredProof of registration under Employee Provident Funds and Miscellaneous provision Act. 1952 (.pdf)

RequiredAffidavit that information furnished with the bid is correct in all respect (.pdf)

Requiredemail Mobile No , and Full Address (.pdf)

Finance

RequiredBill of quantities (.xls)

Fee & Financial Details

Tender Fee Amount

₹350

EMD Fee Amount

₹4,300

Important Dates

Last Activity

9 Apr 2026

Published

27 Mar 2026

Bid Opening

4 Apr 2026

Download Starts

27 Mar 2026

Download Ends

4 Apr 2026

Submission Starts

27 Mar 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (3 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Steel work welded in built up section/ framed work , including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.
2supplying and fixing welded mesh 225x25x3mm to wood or steel members in partitions etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.
3Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping including carriage of materials in all leads as per directions of the Engineer-in-Charge.(i) With white enemal paint.
4Providing and fixing copper osidised fittings ( iron ) butts hinges 75x47x1.70 mm
5Providing and fixing oxidised M.S. sliding door bolts with bolts and nuts screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 250x16mm (two hundred fifty into sixteen milimetre)
6Providing and fixing M.S tower bolts ( Barrel type ) complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)150x10mm
7	Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 0.50 mm thick with zinc coating not less than 275gm/m. (MAKE TATA )	1	Per Square Meter	-	-
8Providing and fixing of 40cm wide over all width plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete, bent to shape and fixed in wall with cement mortar 1:3 (One cement: Three coarse sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)0.50mm thick with zinc coating not less than 275gm/m.
9Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)For thickness of tiles 10 mm to 25 mm
10	Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)1:2:4 (one cement : two coarse sand) : four graded stone aggregate 20 mm (twenty milimetre) nominal size)	1	Per Cubic Metre	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.42 MB

Work Item Documents

SBD232244.pdf

Tender Documents • 7.00 MB

BOQ_196023.xls

BOQ • 0.31 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

AVTAR SINGH

Accepted-Technical

KUSHAL GANGTA

Accepted-Technical

GANGTA NIWAS KUFTADHAR TEHSIL DISTT SHIMLA H P | SHIMLA | SHIMLA | HIMACHAL PRADESH | 171002

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Steel work welded in built up section/ framed work , including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.
2supplying and fixing welded mesh 225x25x3mm to wood or steel members in partitions etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.
3Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping including carriage of materials in all leads as per directions of the Engineer-in-Charge.(i) With white enemal paint.
4Providing and fixing copper osidised fittings ( iron ) butts hinges 75x47x1.70 mm
5Providing and fixing oxidised M.S. sliding door bolts with bolts and nuts screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 250x16mm (two hundred fifty into sixteen milimetre)
6Providing and fixing M.S tower bolts ( Barrel type ) complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)150x10mm
7	Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 0.50 mm thick with zinc coating not less than 275gm/m. (MAKE TATA )	1	Per Square Meter	-	-
8Providing and fixing of 40cm wide over all width plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete, bent to shape and fixed in wall with cement mortar 1:3 (One cement: Three coarse sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)0.50mm thick with zinc coating not less than 275gm/m.
9Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)For thickness of tiles 10 mm to 25 mm
10	Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)1:2:4 (one cement : two coarse sand) : four graded stone aggregate 20 mm (twenty milimetre) nominal size)	1	Per Cubic Metre	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Steel work welded in built up section/ framed work , including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

2supplying and fixing welded mesh 225x25x3mm to wood or steel members in partitions etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

3Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping including carriage of materials in all leads as per directions of the Engineer-in-Charge.(i) With white enemal paint.

4Providing and fixing copper osidised fittings ( iron ) butts hinges 75x47x1.70 mm

5Providing and fixing oxidised M.S. sliding door bolts with bolts and nuts screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 250x16mm (two hundred fifty into sixteen milimetre)

6Providing and fixing M.S tower bolts ( Barrel type ) complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)150x10mm

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 0.50 mm thick with zinc coating not less than 275gm/m. (MAKE TATA )

Per Square Meter

8Providing and fixing of 40cm wide over all width plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete, bent to shape and fixed in wall with cement mortar 1:3 (One cement: Three coarse sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)0.50mm thick with zinc coating not less than 275gm/m.

9Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)For thickness of tiles 10 mm to 25 mm

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)1:2:4 (one cement : two coarse sand) : four graded stone aggregate 20 mm (twenty milimetre) nominal size)

Per Cubic Metre