Construction of OHT Motor and Pipeline at Ganjagera Tanda in Chincholi Taluka and Drilling of Borewell and providing motor pipeline to Ranapur Tanda in Chincholi Taluka under KKRDB

Construction of OHT Motor and Pipeline at Ganjagera Tanda in Chincholi Taluka and Drilling of Borewell and providing motor pipeline to Ranapur Tanda in Chincholi Taluka under KKRDB

Ganjigera Tanda Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 80342000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifi...

Supply and delivery at site 50mm(2 ” ) dia heavy duty unplasticized PVC Column pipes with heavy duty collers,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proo...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 6941990 with ISI Mark and as per its latest amendments

Supply and delivery at site of brand new best make nonreturn valve as per IS 778/1984 with ISI Mark and as per its latest amendments

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well c...

Labour charges for Erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including providing cement concrete foundation bed etc, comple...

Providing main connection from pole PVC insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit The pits should be filled up with equal proportion of sal...

RCC hume pipe Circular pump house: Supplying precast RCC Circular Hume pipe pump house with MS door and RCC conical roof as per specification and drawings Internal dia Mtr 1200 mm & height of 25 Mtr ...

Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc,co...

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

Providing and laying in position plain cement concrete for levelling course for all works in foundation The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 050m to 350 m ...

Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including necessary scaffolding and scrapping of old paint and stain with wire brushes and cle...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 49842016 with latest ammendments and conveying to work site including loading and unloading at both destinations and r...

Supply and delivery at site of brand new best make nonreturn valve as per IS 778/1984 with ISI Mark and as per its latest amendments

Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work sit...

Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work sit...

Providing 80 mm dia Air valve confirming to IS 1538 (PartI to XXII) 1978 with latest amendments if any

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Providing wrought mild steel (galvanized) GI collar confirming to IS 1239II, 1991 with latest amendments if any For 65 mm dia GI collar:

Lowering, Laying and Jointing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including ...

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239II, 1991 with latest amendments if any for: For 65mm dia GI elbow

Earth work excavation for Foundation In all kinds of soils Depth upto 3 m by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shorin...

Earth work excavation for Foundation In all kinds of soils Depth upto 3 m by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shorin...

Providing and laying in position plain cement concrete PCC 1:2:4 using 40 mm aggregate for levelling course for all works in foundation The granite/trap/basalt crushed graded coarse aggregates and fin...

Providing and laying in position Reinforced cement RCC M25 Design Mix with 20mm aggregate for footings, rafts and combind footing etcwith smooth finishing the exposed faces in CM 1:4, 12mm thick concr...

Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per rel...

Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging The granite/trap/basalt crushed graded coarse aggregates and fine aggregates...

Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level The granite/trap/basalt crushed graded coarse aggregates and fine aggrega...

Providing ThermoMechanically Treated bars of grade Fe500D or more Steel reinforcement for RCC work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent memb...

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms centre to centre,with necessary supports of same angle iron etc as directed, in...

Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 30mm ‘C’ section for ladder side channel x 25mm dia, flutal pipe for Rungs at 250mm c/c ladder fixed at an angl...

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc includin...

Providing and fixing DI/CI puddle flanges conforming to IS 71811986 with latest ammendments, in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc c...

Providing, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying...

Providing CI bank flange confirming to IS 1538 (PartI to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc complete

Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (PartI to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc complete

80mm dia CI Bell mounthed pipe

Providing Duck foot bend confirming to IS 1538 (PartI to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc complete

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia with body bonnet of ductile iron (DI) conforming to IS1865 and of grade GGG 40/50, shaft of stainless steel, wedge fu...

Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 023 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pain...

Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc before removal of scaffolding for new RC...

Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade

Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...

Supplying and fixing 40mm dia GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtrs intervals for a height of 750...

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

Providing and laying in position plain cement concrete for levelling course for all works in foundation The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...

Providing and laying in position Reinforced cement concrete for all Foundation works The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed...

Supplying, Fitting and Placing uncoated TMT Fe 550 & above bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

Providing and fixing 60x60cms MS inspection door with necessary MS frame made out of MS angle 50x50x6mm and MS shutters of 315mm or BG10 thick with hinges on top and locking arrangement, painting etc,...

Earth work excavation for Foundation by mechanical means for all works &depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...

Supplying filling spreading & leveling stone boudlers of size range 5 cm to 20 cm in recharge pit in the required thickness for all leads & lifts all complete as per direction of Engineer in Charge

Suppling of 40 mm downsize agrregate

Suppling of 20 mm downsize agrregate

Supplying of sand river sand

Providing and constructon load bering wall with solid concrete blocks of size 400x100x200mm having block density moretha 1800kg/m3 and minimum compressive strenth of 400 mm2 conforming to IS 2185 2005...

Ranapur Tanda Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 80342000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifica...

Supply and delivery at site 50mm(2 ) dia heavy duty unplasticized PVC Column pipes with heavy duty collers,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof EP...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 6941990 with ISI Mark and as per its latest amendments

Supply and delivery at site of brand new best make Pressure Gauge as per IS 778/1984 with ISI Mark and as per its latest amendments

Supply and delivery at site of brand new best make nonreturn valve as per IS 778/1984 with ISI Mark and as per its latest amendments

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well c...

Labour charges for Erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including providing cement concrete foundation bed etc, comple...

Providing main connection from pole PVC insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit The pits should be filled up with equal proportion of sal...

RCC hume pipe Circular pump house: Supplying precast RCC Circular Hume pipe pump house with MS door and RCC conical roof as per specification and drawings Internal dia Mtr 1200 mm & height of 25 Mtr ...

Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc,co...

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

Providing and laying in position plain cement concrete for levelling course for all works in foundation The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 050m to 350 m ...

Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including necessary scaffolding and scrapping of old paint and stain with wire brushes and cle...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 49842016 with latest ammendments and conveying to work site including loading and unloading at both destinations and r...

Supply and delivery at site of brand new best make nonreturn valve as per IS 778/1984 with ISI Mark and as per its latest amendments

Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work sit...

Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work sit...

Providing 80 mm dia Air valve confirming to IS 1538 (PartI to XXII) 1978 with latest amendments if any

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Providing wrought mild steel (galvanized) GI collar confirming to IS 1239II, 1991 with latest amendments if any For 65 mm dia GI collar:

Lowering, Laying and Jointing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including ...

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239II, 1991 with latest amendments if any for: For 65mm dia GI elbow

Earth work excavation for Foundation by mechanical means for all works &depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...

Supplying filling spreading & leveling stone boudlers of size range 5 cm to 20 cm in recharge pit in the required thickness for all leads & lifts all complete as per direction of Engineer in Charge

Suppling of 40 mm downsize agrregate

Suppling of 20 mm downsize agrregate

Supplying of sand river sand

Providing and constructon load bering wall with solid concrete blocks of size 400x100x200mm having block density moretha 1800kg/m3 and minimum compressive strenth of 400 mm2 conforming to IS 2185 2005...