REPAIR TO JOINERY PLUMBING AND MISC BR WORKS FOR OTM ACCN IN OD COMPLEX UNDER GE (EAST) MATHURA

Amount

Demolition of reinforced cement concrete as in chajja's and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M&L for 50mm thick sand stone slab as in chajja's set and jointed over joists etc in cement mortar 1:4 complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connection including disconnection of fittings complete all as specified and as directed.

M&L for mild steel tubing 15mm bore medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as directed.

M&L for Cutting chases pinning in , making good to facing where reqd and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, selfs lintels etc. and cutting chases for conceled water tubing for concealed conduit wiring etc and making good, cutting n.exc 10cm girth complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections including disconnection of fittings complete all as specified and as directed.

M&L mild steel tubing, galvanised 20mm bore medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and as directed.

Taking up or down 25 mm bore steel tubing and connections including disconnection of fittings complete all as specified and as directed.

M&L mild steel tubing galvanised 25mm bore medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and as directed.

Demolition of Brick masonry built in cement mortar including all quoin, arches pillar etc complete all as specified and as directed.

M&L for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for cement mortar 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in louvers and jallies 35mm thick including all mouldings set in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls including racking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finishing the surfaces even & smooth without using extra cement complete all as specified and as directed.

M&L rendering 15mm thick on other than face fair face of brick work or concete surface in cement mortar 1:4 mixed with liquid water proofing compound as per manufacturers instructions and surface finished even & fair complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only Liquid water proofing compound of approved make complete all as specified and as directed.

M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even & fair complete all as specified and as directed.

M&L for rendering 10 mm thick on concrete surfaces as in ceiling in cement mortar 1:3 finished even & fair without extra cement complete all as specified and as directed.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and as directed. Note : Make : Asian paints/Dr Fixit/STP/CICA

M&L for preparation of new plastered surface of ceilling and applying three coats of white wash complete all as specified and as directed.

M&L preparation of new plastered surfaces of walls providing 1mm thick wall care putty to achieve smooth surface and applying two coats of oil bound distember over and including a coat of alkali resistant primer complete all as specified and as directed.

M&L for prepration of new plastered surface of walls and applying two coats of cement base paint, white or tinted over and including a coat of primer complete all as specified and as directed.

M&L for preparation of old decorative surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and as directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

All as per Serial item No 25.00 here-in-before but on vertical surfaces over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

All as per Serial item No 26.00 here-in-before but on vertical surfaces over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles 450x300x7mm thick on vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) work black colour as specified (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms laid over and including 10mm thick screed bed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair 75mm bore PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with necessary clamp complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with necessary clamp complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) bends any radius with oval access door complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as specified and as directed.

S&F in repair 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as specified and as directed.

S&F in repair PVC floor trap dia of outlet 75mm plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair Bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for 15mm dia bore iron pipes or for brass ferrule complete all as specified and as directed.

S&F in repair stop valve/angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for 15mm bore iron pipes or for brass ferrule complete all as specified and as directed.

S&F in repair Hand jet health faucet 15 mm bore with 8mm dia & 1.2 mtr long stainless steel flexible tube and wall hook with all connected fittings complete all as specified and as directed.

S&F stainless steel Grating doom 100 mm dia complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repair PVC valveless syphonic action type low level flushing cistern dual operation water saving type of 10 litre capacity, white/coloured with inlet ball valve, float, handle fixing brackets including 32 mm bore PVC flush pipe etc complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified and as directed

S&F 12 mm thick wood plastic composites board (WPC) both sides balancing white fixed to each other using solvent cement fixed with screw and solvent cement adhesive in cupboard, kitchen etc complete all as specified and as directed.

S&F18mm thick wood plastic composite board (WPC) one side laminate other side balancing white in shelf, partion of required size and for supporting the hold of shelfs/partion including providing PVC lipping of size18 x 1mm front visible edge of the shelf/partition etc complete all as specified and as directed

S & F Magnatic catcher of size 20mm x 50mm suitable for cup board/kitchen cabinet shutter complete all as specified and as directed.

S&F stainless steel handles, cast type polished bright of 100 mm size for kitchen cabinet shutters complete all as specified and as directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001)OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed.

Dismantling old unserviceable wood plastic composite board (WPC) including all fittings of kitchen cabinet complete all as specified and as directed.

S&F in repair Stop valve cast copper alloy, chromium plated with long shank & cup (concealed type) screwed down, screwed for 15mm bore iron pipe complete all as specified and as directed.

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete including PVC low level flushing cistern 10 liter capacity white/coloured dual operation type with inlet, ball valve, float, handle and fixing brackets including 32mm dia PVC Flush pipe complete complete all as specified and as directed.

S&F in repair Sinks with drainage board made of stainless steel lmm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps waste chain and plug including bracket complete all as specified and as directed.

S&F in repairs wall mixer cast copper alloy chromium plated with connector including hand shower and head shower arrangement with connecting legs ,wall flanges and wall bracket screwed for 15mm dia bore iron pipe or union complete all as specified and as directed.

S&F in repairs wash hand basin mixer cast copper alloy chromium plated with 450mm braided connection pipe screwed down for iron pipe 15mm dia bore complete all as specified and as directed.

S&F in repair PTMT Ball valves, high pressure, with polythene float & flynut complete, screwed for 20mm dia bore iron pipe or brass ferrule complete all as specified and as directed.

S&F in repairs floor door stopper overall length of cover plate 150mm of brass body and tongue with hard drawn steel spring fixed in floor complete all as specified and as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and as directed.

S&F in repairs monkey protection cover for HDPE water tank of capacity 500/1000 ltrs rotating type including frame, nut, bolt etc. complete all as specified and as directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe or union 15mm dia bore and fixed complete all as specified and as directed.

S&F in repair cast copper alloy, chromium plated swivel shower rose 125mm size with 450mm long stainless steel arm complete all as specified and as directed.

Supply and fix in repair Rotational moulded, polythene water storage tank of 1000 liters capacity triple layer white colour (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fittings and Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia bore complete all as specified and as directed.

All as per serial item No 67.00 here-in-before but PVC water storage tank 750 liter capacity complete all as specified and as directed.

S&F in repair Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes 20 mm bore dia of pipe and fixed complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and as directed.

S&F in repair Waste fittings, brass, chromium plated for wash hand basin 32mm bore waste pipe etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

Demolition of cement Concrete (unreinforced) in ground floors and pavings exc 15 cm thickness (below or above ground level) including chequered tiles and paver blocks complete all as specified and as directed.

M&L for 100 mm thick cement concrete type-D-2, 1:4:8 (using 40mm graded stone aggregates) as in sub base complete all as specified and as directed.

M&L for sand filling under floor or in foundation including watering and consolidation complete all as specified and as directed.

M&L for rubber mould Machine pressed precast concrete interlocking paver block with grey cement and no pigments any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and as directed.

Taking down Shutters of any description n exc 1 sq.m each complete all as specified and as directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, complete all as specified and as directed.

M&L for 4 mm thick non-asbestos fibre cement building board fixed on aluminium frame work complete all as specified and as directed.

S&F solid PVC wall lining consisting of 5 mm thick plain coloured PVC Sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification complete all as specified and as directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Taking down old aluminium shutter exc 1.5 sqm n exc 4sqm each easing and adjusting bottom and top pivot, repair the locking arrangement & floor spring and refixing in the same opening complete all as specified and as directed.

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc all as specified below complete all as specified and as directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370). Note:- Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B.

S&F aluminium partition wall of section as in frame /single double grove of size 63.5 x 38.1 x 2mm thick including 5 mm thick tinted glass, 20 mm thick pre-laminated particle board with all necessary fittings. Vertical section has to be supported with angle of size 65 x 65 x 6 mm thick including making good of existing surface complete all as specified and as directed.

S&F of Pressed steel frames of size 125x60mm fabricated out of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

S&F Pressed steel frames of size 105 X 60 mm fabricated out of 1.25mm thick MS steel for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

M&L for cement concrete type C-0 1:3:6 (using 12.5mm graded stone aggregate) as in bed block and filling back of door frames complete all as specified and as directed.

S&F factory made 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type with lipping/frame to match on both sides complete all as specified and as directed.

S&F factory made 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F Aluminium handles of size 150 mm fabricated type, anodised complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250mm long of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F Butt hinges 100mm size extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed.

S&F in repair 25 mm dia stainless steel alloy tubular drapery rod cut to size and fixed in position including fixing brackets,stops end caps etc complete all as specified and as directed.

S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repair 4 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in square n.exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F in repair 4 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in square exc 0.50 Sqm in each pane complete all as specified and as directed.

M&L for powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps and junctions, i.e at top, bottom and sides with required EPDM rubber/neoprene gask etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws complete all as specified and as directed.

M&L for Anodised Aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodise coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with chromium plated brass/stainless steel screw @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and as directed.

S&F sheet glass 5.50 mm thick ordinary quality and glazing with aluminium beading exc 0.50 sqm in each pane complete all as specidfied and as directed.

M&L Anodised Aluminium window and ventilator shutters, powder coated (minimum thickness of powder coating 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

M&L aluminium anodised barrel tower bolt of 75mm long of extruded section and fixed complete all as specified and as directed.

M&L for spot welding for repairing steel windows and ventilators of any size and at any position including hinges, brackets, steel handle, etc complete all as specified and as directed.

M&L easing and adjusting steel windows and ventilators, hinges, brackets, steel handle, etc for smooth by spot welding at site complete all as specified and as directed.

S&F in repairs MS box type hinges for steel window 100 mm size cold rolled mild steel medium weight fixed to MS pressed steel chowkhats including necessary welding and making good of damaged portion etc complete all as specified and as directed.

GANGA CONSTRUCTION

M/S CHAUDHARY CONSTRUCTION

B S ENTERPRISES

Ahmed constructions