Loading…
Loading…
Tender Value
₹2.1 Cr
EMD Value
₹4.2 L
Closing Date
8 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
DRM WA
15 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: for b (i) separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(ii) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. Any work or set of works shall be considered to be a separate component, only when cost of the component is more than 2 crore each.
(b) (iii) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contract or through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issuedbyapersonauthorizedbythePubliclistedcompanytoissuesuchcertificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Similar Nature of Work:- Any Civil Engineering work.
2 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
I/ We have visited the works site and I / We am / are aware of the site conditions.
ADEN BKI Subdivision:- Improvement to road surface, drainage system and ancillary works at RUBs.
ENGG-JP-2026-27-13
ENGG-JP-2026-27-13
Open
Works - General
8 Months
Jaipur, Rajasthan
₹0
₹4.2 L
8 Apr 2026
17 Mar 2026
25 Mar 2026
55 items across 2 schedules · ₹2,01,50,247.26 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum | 125 | 260.3 | 32,537.5 |
| 2 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 335 | 700.5 | 2,34,667.5 |
| 3 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 85 | 7,294.7 | 6,20,049.5 |
| 4 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 30 | 6,812 | 2,04,360 |
| 5 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 40 | 9,895.2 | 3,95,808 |
| 6 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 950 | 961.3 | 9,13,235 |
| 7 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 25 | 7,370.65 | 1,84,266.25 |
| 8 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 12 | 9,344.35 | 1,12,132.2 |
| 9 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 195 | 7,311.25 | 14,25,693.75 |
| 10 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 2250 | 133.7 | 3,00,825 |
| 11 | Hot finished welded type tubes | Kg | 31500 | 194.4 | 61,23,600 |
| 12 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 650 | 738.65 | 4,80,122.5 |
| 13 | 1:4 (1 cement: 4 fine sand) | Sqm | 950 | 347.05 | 3,29,697.5 |
| 14 | 1:6 (1 cement: 6 fine sand) | Sqm | 750 | 333.35 | 2,50,012.5 |
| 15 | Lettering with black Japan paint of approved brand and manufacture | per letter per cm height | 9500 | 6.15 | 58,425 |
| 16 | Old work (one or more coats) | Sqm | 750 | 93.3 | 69,975 |
| 17 | One or more coats on old work | Sqm | 1800 | 102.8 | 1,85,040 |
| 18 | Re-lettering with black Japan paint of approved brand and manufacture. | per letter per cm height | 6000 | 3.85 | 23,100 |
| 19 | Old work (one or more coats @ 2.20 kg/10 sqm) complete. | Sqm | 450 | 75.8 | 34,110 |
| 20 | With cement mortar 1:4 (1 cement : 4 fine sand) | Sqm | 45 | 547.4 | 24,633 |
| 21 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 65 | 2,434.25 | 1,58,226.25 |
| 22 | Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) | cum | 65 | 1,503.6 | 97,734 |
| 23 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 850 | 263.95 | 2,24,357.5 |
| 24 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. | Sqm | 120 | 218.9 | 26,268 |
| 25 | 53 mm to 22.4 mm size stone aggregate | cum | 65 | 1,842.3 | 1,19,749.5 |
| 26 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . | cum | 65 | 1,046.95 | 68,051.75 |
| 27 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. | cum | 55 | 7,993.8 | 4,39,659 |
| 28 | Cement concrete prepared with batch mixing machine | cum | 195 | 10,529.35 | 20,53,223.25 |
| 29 | Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm | Each | 6 | 7,183.35 | 43,100.1 |
| 30 | Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm | Each | 6 | 5,559.75 | 33,358.5 |
| 31 | Overhead informatory road signage | Sqm | 8 | 5,879.9 | 47,039.2 |
| 32 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. | Sqm | 95 | 747.8 | 71,041 |
| 33 | 600 mm dia RCC pipes. | Metre | 18 | 3,401.25 | 61,222.5 |
| 34 | 300 mm dia | Metre | 250 | 707.75 | 1,76,937.5 |
| 35 | 300 mm dia | Metre | 90 | 825.7 | 74,313 |
| 36 | 200 mm nominal size dia having minimum wall thickness 5.40 mm | Metre | 260 | 2,442.75 | 6,35,115 |
| 37 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by V notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. | Hour | 75 | 1,085.05 | 81,378.75 |
| 38 | 50mm average thickness | Sqm | 115 | 256.35 | 29,480.25 |
| 39 | Bars upto 12 mm diameter | Metre | 1200 | 8.25 | 9,900 |
| 40 | 50 mm thick in Grade M25 with cement content not less than 330 kg per cum | Sqm | 150 | 569.15 | 85,372.5 |
| 41 | Epoxy injection grout in concrete/RCC work of approved make | Kg | 1250 | 553.4 | 6,91,750 |
| Schedule total | ₹1,72,29,567.75 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC April 2022 with correction slip
ATTACHMENT
CableCutletterofHQ_compressed1_1.pdf Cable cut JPO letter of HQ
ATTACHMENT
HQletterforbrandmaterialofworks_1.pdf HQ letter for metarial use
ATTACHMENT
Tender Document
ATTACHMENT
11.Correctionslip11GCCworks-2022.pdf Correction slip 11 of GCC 2022
ATTACHMENT
10.GCC-2022-ACS10-updated_compressed_1.pdf
ATTACHMENT
CableCutletterofHQ_compressed1_1.pdf
ATTACHMENT
HQletterforbrandmaterialofworks_1.pdf
ATTACHMENT
TenderDocumentandspecialcondition26-27-13.pdf
ATTACHMENT
11.Correctionslip11GCCworks-2022.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .