Repair/Maintenance of distribution water supply CI/GI pipeline in Offrs/JCOs/ORs Md and OTM Accn at Mil Stn Kapurthala under GE Kapurthala.

Amount

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for taking out and laying CI/GI pipe complete all as specified and directed by Engr-in-Charge.

Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer complete all as specified and directed by Engr-in-Charge.

Removal of surplus spoil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-Charge.

Taking down GI pipe 20 mm bore medium grade and fitting and supply and fixing GI tubing medium grade 20 mm bore in any length with all fitting laid in trench and connecting up with water supply main complete all as specified and directed by Engr-in-Charge.(Excavation and earthwork shall be measured and paid for separetely under approprite item)

All as per item ser No 4 above here in before but 25 mm bore complete all as specified and directed by Engr-in-Charge.

All as per item ser No 4 above here in before but 40 mm bore complete all as specified and directed by Engr-in-Charge.

All as per item ser No 4 above here in before but 50 mm bore complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable GI/CI pipe 80 mm bore and supply, laying, jointing and testing new cast iron pipe 80 mm bore centrifugally cast class LA confirming to IS - 1536 spigot and socketed ends in any length laid in trenches complete all as specified and directed by Engr-in-Charge. (Note : excavation, earth work, CI fitting and new run lead joint shall be measured and paid for separetely under appropriate item of Sch 'A')

All as per item No 8 above here in before but 100 mm bore complete all as specified and directed by Engr-in-Charge.

All as per item No 8 above here in before but DI (K-7)100 mm bore complete all as specified and directed by Engr-in-Charge.

All as per item No 8 above here in before but 150 mm bore complete all as specified and directed by Engr-in-Charge.

All as per item No 8 above here in before but DI (K-7) 150 mm bore complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacment of gun metal globe or gate valve with iron wheel head screwed both ends suitable for galvanised pipe 20 mm bore complete all as specified and directed by Engr-in-Charge.

All as per item Ser No 13 above here in before but 25 mm bore complete all as specified and directed by Engr-in-Charge.

All as per item Ser No 13 above here in before but 40 mm bore complete all as specified and directed by Engr-in-Charge.

All as per item Ser No 13 above here in before but 50 mm bore complete all as specified and directed by Engr-in-Charge.

S&F GI coloumn pipe 100mm dia heavy duty 'C' class with flanged ends drill 3 meter including joining to exising main pipe line complete all as specified and directed by Engr-in-Charge (the cost of nuts bolts washers packing materials and pressure gauge shall be deemed to include in unit rate quoted by the contractor.

Supply and fixing in replacement cast iron pipe 150 mm bore centrifugally cast class 'A' flanged both end in any length complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement cast pipe 100 mm bore centrifugally cast class 'A' flanged both end in any length complete all as specified and directed by Engr-in-Charge.

M&L for lead joint suitable for CI pipe 80 mm bore complete all as specified and directed by Engr-in-Charge.

M&L for lead joint suitable for CI pipe 100 mm bore complete all as specified and directed by Engr-in-Charge.

M&L for lead joint suitable for CI pipe 150 mm bore complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement cast iron fitting such as bends, tapers, (any type, radius and angle) tapers any type,(straight, bend, increasing,decreasing or double socket etc.)Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs tee pieces, single branch for spigot and socket and flanged pipe up to 150 mm bore complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacment cast iron sluice valve 80 mm bore with flanged ends, with Gun metal spindle, CI gate with brass ring and iron wheel handle with jointing material such as nuts /bolts washers and rubber insertion sheet etc including taking out old U/S sluice valve complete all as specified and directed by Engr-in-Charge.

All as per Srl item No 24 here in before but 100 mm dia complete all as specified and directed by Engr-in-Charge.

All as per Ser item No 24 above here in before but 150 mm bore complete all as specified and directed by Engr-in-Charge.

Takeing down old u/s bleching dozing pump along with all accessories and Supply and install connecing. Testing and commissioning of High Pressuure single Head adjustable "DECLIBAC" Dosing system Model No VST 1005 and VST 1006 of the following specification. Adjustble High Pressure 5 Kg/Sq. cm. power input 230V, 50 Hz, 40 SPM 1/30 fractional Horsepower, Max output 10 Ltr with mandatory accessories like lead Tubing, connecting ferrules, check valves, etc (A) Preparation tank Model No VST 1005 of net capacity 100 Ltr, FRP dosing tank dia 650 x net Height 375 + conical 300. Gross height with stand 1000 mm consisting of : (i) Water inlet line (ii) Outlet with stainer (iii) Drain (iv) overflow (v) conical bottom for sludge depositing (vi) Pot hole with cover (vii) level gauge (viii) Agitator 120 watt 900 RPM single phase flange mounted motor with plastic shaft and impeller. (B) Service Tank Model No VST 1006 dia 480 x height 575 net capacity 100 Ltr consisting of (i) water inlet line (ii) Dosing pump inlet arrangement (iii) Drain (iv) Overflow (v) Level Gauge (vi) inspection port (vii) Agitator 120 watt 900 RPM Single Phase flange mounted moto with plastic shaft and impeller (ix) provision of mounting Pump on Lid/wall. complete all as specified and directed by Engr-in-Charge. Make : DECLIBAC or equivalent to ISI mark complete all as specified and directed by Engr-in-charge.

Material labour and services for taking sample water in sterlised bottles from various borewells for Analysis of water for the following parameters and obtaining sample test report from Govt Recognized Laboratories: (i) Physio Chemical Analysis of Water ( Colour , odour , pH Total solids, Dissolved Solids, Permanent hardness, temporary Hardness, Ammonia feree and salinbe, Ammonia Albuminoidal, Nitrites, Nitreates, Oxygen absorption at 15 Min, Iron , Fluoride) (ii) Microbiological Analysis ( Totral Choliforms , Eschirrchea Coli) complete all as specified and directed by Engr-in-Charge. Note : 1. A certificate of approval / certification of Lab by Goivt Of India / State Govt shall be submitted by the contractor to the deptt. 2. Sample shall be submitted to the Labortory within 24 Hrs of collection of sample

Supply of Chlorine test kit with coloured ample complete with all testing fitments and OT solution in Rexene finish Box complete all as specified and directed by Engr-in-Charge. Make - RMCO or equivalent to ISI mark complete all as specified and directed by Engr-in-charge.

Repair to existing valve pits of internal dimensions 90cm x 90 cm x 90 cm making good disturbed/dismantled brick work in cement mortar (1:4) plastering surfaces in CM 1:6, 15mm thick and PCC coping in cement concrete 1:2:4 type B-1 and providing MS cover in replacement made out of MS sheet 3 mm thick duly welded to MS angle iron frame 35x35x5mm including frame work as per existing size with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. (a) M&L for brick work using sub class 'B' (old size bricks) in CM 1:4 (b) M&L for rendering 15 mm thick in CM 1:4 finishing even and fair (c) M&L for PCC 1:2:4 type B-0 (using cum 12.5 mm graded stone aggregate ) as in coping (d) M&L for any type of mild steel work such as frame sheet 3 mm thick including welding (e) M&L for painting two coats of synthetic enamel paint over a coat of red oxide primer to untreated steel surface & prep of surface.

Supply and fix star delta starter fully automatic suitable for 415 V AC 35 HP, Make : ABB/SIEMENS/SCHNIDER/L&T

Supply and fix star delta starter fully automatic suitable for 415 V AC 30 HP, Make : ABB/SIEMENS/SCHNIDER/L&T

Supply and fix star delta starter fully automatic suitable for 415 V AC 25 HP, Make : ABB/SIEMENS/SCHNIDER/L&T

S&F in replacement MCCB 350 Amp 4 pole 36 KA 415 Volt complete all as specified and directed by Engr-in-Charge.

S&F in replacement MCCB 200 Amp 4 pole 36 KA 415 Volt complete all as specified and directed by Engr-in-Charge.

S&F in replacement MCCB 160 Amp 4 pole 36 KA 415 Volt complete all as specified and directed by Engr-in-Charge.

S&F in replacement MCCB 250 Amp 4 pole 36 KA 415 Volt complete all as specified and directed by Engr-in-Charge.

Supply only Calcium based granuler disinfect suitable for treatment drinking water in 45 kg plastic drum complete all as specified and directed by Engr-in-Charge. Make: Rayal Seema/Aquafit/Daclibac

DUGGAL CONSTRUCTION CO

SUNRISE ENGINEERS AND CONTRACTOR

M/s Bansi Lal

M/S MAHAJAN CONSTRUCTION CO