PROVN OF FLAME PROOF LIGHT, CEILING FAN AND EXHAUST FAN AND ALLIED WORKS AT DANGER BLDG AT AFS DEOLALI

Amount

M&L for point wiring complete with two single core, PVC insulated, unsheathed, multi stranded bright annealed copper conductor cable, 1.5 Sq.mm 1100 Volts, FRLS grade drawn through and including heavy duty Instove enameled steel conduit not less than 25 mm width and accessories surface mounted on walls, ceilings etc. on & including Steel terminal boxes made out of 1.2mm thick sheet sunk cast iron / pressed inclluding one coat red oxide primer on internal and external surface covered with 3mm thick hylam brand IS-2036 suitable board for flame proof with earth dolly arrangement with surface plate for mounting switches, sockets, regulators etc and one run of 1.5 Sq.mm PVC insulated, unsheathed, multistranded, copper conductor cable FRLS grade as earth wire and connected to common earth dully complete for the One light/fan point controlled by one switch.

All as per Sl item No 02 above but with two runs of 2.5 Sq.mm cable and one run of 2.5 Sq.mm cable as earth wire for one 3 pin socket outlet/power point 15 Amps controlled by one switch.

Supply & fix switch flame proof rotary type with termination box in LM6, 16A, single pole 250V. Complete all as specified and directed. Make: Sudhir, Shyaam PVT Ltd, Crompton Greaves

M & L for sub main wiring with stranded copper conductor 1100 volts grade of size 4 sqmm , single core multistranded unsheathed ( red colour cable used for phase connection and black for neutral ) PVC insulated cable ( HR - FR ) and 2.5 sqmm copper wire (HR - FR ) 1100 Volts grade multistrand and unsheathed PVC insulated ( green colour ) cable for earth continuity wire connected to common earth dolly through steel conduit of size 25 mm including accessories complete.all as specified and as directed NOTE :- a) 2 run of 4 sqmm size copper cable and 1 run of 2.5 sqmm copper wire incl Steel conduit shall be measured as one length.

Supply & fix socket 16 Amp flame proof rotary type with termination box in LM6, 16A, single pole 250V Make: Sudhir, Shyaam PVT Ltd, Crompton Greaves

Supply & fix flame proof wall mounted fan 610 mm (24") sweep1440 RPM 230 V including all fixing arrangement, wall cutting and cement work all directed by Engr in charge. Make: Sudhir, Shyaam PVT Ltd, Crompton Greaves

Supply & fix flame proof ceiling fan 1200/1220 mm (48'') sweep1440 RPM 230 V including fan regulator all fixing arrangement to ceiling including with nut bolt concrate dirlling for fixing of ceiling fan complete all as directed by Engr-in-Charge. Make: Sudhir, Shyaam PVT Ltd, Crompton Greaves

Supply & fix flame Exhaust fan 610 mm (24") sweep1440 RPM 230 V including all fixing arrangement on exisiting window complete with nut bolt frame all directed by Engr in charge. Make: Sudhir, Shyaam PVT Ltd, Crompton Greaves

S&F sheet metal enclosure 4 way MCB SPN distribution board flame proof type 240/415 volt, double door with DIN rail bus bar, neutral link, earth terminal etc IP-43, IK 09 protection including MCB SP 02 Nos 32 Amp and SPN 32 Amp 01 all as specified and directed by Engr-in-Charge. Make: Sudhir, Shyaam PVT Ltd, Crompton Greaves

Supply and fixing LED light fitting 1x 30 Watt flameproof, CMRI certified recommended for gas/ vaporgroup of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistanttoug hened glass with inbuilt driver,holders, connector etc.Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.complete all as director. Make: Sudhir, Shyaam PVT Ltd, Crompton Greaves

M&L of cable tray metal -pre galvnised/GI with epoxy powdercoated over a coat of red oxide primer, factory made of size 300x75x1.2 mm (width x Depth x Thick) fitted on wall/ceiling complete with drilling necessary nut bolt wishers and good on existing wall complete all as specified and directed by Engr-in-Charge.

Supply and lay in trenches/floor/on wall/ on surface with necessary fixing accesseries LT XLPE insulated screened PVC beded galvanised steel strip or wire armoured electric power cable (heavy duty)1100 volts grade with stranded aluminium conductor of size 16 Sqmm 4 Core including necessary connection with provision of lugs & cable gland fixing arrangements all as specified and directed.

M&L & fixing of DWC pipes it should be flexible & should allow deformation in diameter as well as In joints under external load & soil natural movement, socket & spigot joint with electrometric sealing ring , it should be highly corrosive resistant & it should be impact resistant, chemiacal resistant, flexible & light weight of size 63 mm dia complete with coupler, elbows, joints,& necessary space parts complete all as specified

Excavation in trenches n. exc 1.5 Mtr wide and n. exc 1.5 mtr in depth and getting out in hard soil.

Returning Filling in including spreading, leveling, watering & well ramming in layers n. exc 25 Cm.

Removing excavated/Surplus soil n exc 50 Mtr & depositing where directed at a level n. exc 1.5 Mtr above the starting point.

S & F Sheet Metal enclosure double door for mounting MCBs with 200 A rated bus bar 8 way AC 240 Volt with IP-43 protection including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge . Make Indoasian/L&T/HPL

All as per Sl item No 18 above but 4 way way AC 240 Volt with IP-43 protection including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge . Make Indoasian/L&T/HPL

S&F of MCB SPN 32 Amp.

S&F of MCB TPN 40 Amp.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI strip 25x4 mm through GI pipe of suitable dia light grade by means of bolts,nuts, check nuts and washers of galvanised iron or steel,with adequate quantity of charcoal and salt, proper watering arrangements including 20 mm dia medium grade GI tubing.PCC chamber,Chamber Cover all as shown in electrical plate no 3of SSr part I 2009 connected to earthing test point all as specified or indicated and testing on completion. The end point connection of eatrhing will be carried out with the help of GI bolt grouted and washer and nut.

SONA LAKSHMI ASSOCIATE (BID ID -3092090)

SHRI SULAI ELECTRICALS (BID ID -3085833)

Shree Sai Samarth Enterprises (BID ID -3091447)

M/S Nilesh Enterprises (BID ID -3092605)

GILL BROTHERS CONSTRUCTION (BID ID -3091738)

M/s M R MAHANA (BID ID -3099005)