REPAIR/REPLACEMENT OF FLOOR / WALL TILING, PVC PENALING, JOINERY WORK AND OTHER CONNECTED WORKS OF A,B,C,D BLOCKS AND CTVS UNDER GE E/M RR HOSPITAL DELHI CANTT-10

Amount

Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for vitrified ceramic coloured tiles 8mm to 9mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid incl over 15mm thick cement screed bed in CM 1:6 complete all as specified.

M&L for Virified Ceramic tiles light shade 8mm-9mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid incl over 15mm thick cement screed bed in CM 1:6 complete all as specified.

M&L for vitrified ceramic coloured tiles 8 to 9mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in verticle surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid incl over 10mm thick cement screed bed in CM 1:4 complete all as specified.

M&L Granite (of any type) tiles 18-20mm thick machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting & polishing laid incl over 15mm thick cement screed bed in CM 1:6 complete all as specified.

Dismantling of wall and ceiling board/wooden partition board of any description, any thickness including cover fillets and frame work complete all as specified and directed by the Engr-in-Charge

M&L for exposed GI frame/grid system duly powder coated for module size of 595x595 mm suitable for lay-in aluminium / mineral fibre ceiling tiles, having main T runner of 24 mm size, suspended at 1200mm C/C and cross T runner of 24 mm size, suspended at 600mm C/C with interlocking arrangements to form grid of 595x595mm, perimeter runner/channel of 15 mm size, main and cross T runner supported by 4mm dia GI rod from slab / Roof, wall angle etc with and including all fixing accessories and making good of distrubed wall surfaces complete all as specified.

M&L for metal false ceiling, lay-in type, 0.5 mm thick, having tegular edge profile, duly powder coated, perforated type with glass fibre acoustic fleece, suitable for false ceiling grid/frame module of 595x595 mm size, complete all as specified. (Note : The grid /frame shall be measured and paid for separetly.)

Supply & fixing of false ceiling in step (s) comprising of 12 mm thick Gypsum board including GI frame work for seamless ceiling made of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 M length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including two coats of plastic emulsion paint complete all as specified. Note:- the work will be executed as per patten/design as per site required.but mesured flat.

S & F solid PVC wall panelling consisting of 5mm thick wood grain finish PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified.

S & F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified.

S & F solid PVC leeping of 2mm thick wood grain finish PVC sheet is heatbent as lipping on the edges of doors, windows & other edges inclusive of solvent cement and fixing at site complete all as specified.

S & F in repair stainless steel curtain rod 20-22 mm dia including brackets, side knobs fixed to wall complete all as specified and directed.

S&F in repair suitable for 20-22mm dia curtain rod fancy type wooden/steel finished curtain rod with brackets and finials complete all as specified.

S & F Solar control film 25micron reflective type sticked to glass panes as per instruction of manufacturers complete all as specified.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and fair without using extra cement, complete all as specified & directed.

M&L for 5mm thick rendering on concrete ceiling surfaces in cement mortar 1:3, finished the surface even and fair, complete all as specified and directed.

Preparing new plaster surface by washing rubbing down and stopping of distempered and painted surface and applying two coats of distemper oil emulsion on surface of walls over two coat of wall care putty all as specified and directed.

Preparing new plaster surfaces of ceilings by brooming down or by steel wire brushing and applying two coat oil emulsion distemper over two coat of wall care putty on ceiling all as specified and directed.

M&L preparing old decorated surfaces/plastered or unplastered) of walls including brooming down or steel wire brushing scrpping down smoke soot moulds, moss & efforescent salts and tracling oil and greasy spots and applying two coat of OBD complete all as specified.

M&L preparing old decorated surfaces/plastered or unplastered) of ceiling including brooming down or steel wire brushing scrpping down smoke soot moulds, moss & efforescent salts and tracling oil and greasy spots and applying one thick coat of OBD complete all as specified.

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified.

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 etc, complete all as specified.

Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified.

S&F in repairs of roller blinds vertical type made out of fabric cloth of approved shade fixed as per the instructions of manufacturers, complete all as specified .

Taking down of shutter of any description exc 1.0 sqm but n exc 2.00 Sqm each complete all as specified.

Taking down of chowkhat with shutter exc 1.00 Sqm each of any description complete all as specified.

S&F, Powder coated aluminium chowkhats of 100x44x1.5mm section with rebate complete frame complete all as specified.

Supply only 3mm thick aluminium composite panel (ACP Sheet) including necessary clips, rubber packing & aluminium beading (aluminium frame ) all as specified.

Supply fabricating and fixing aluminium door powder coated of extrusion aluminium section, vertical style of door shutter of size 85mmx44.45mmx1.5mm thick. Top, middle and bottom rail of size 85mmx44.45x1.5mm thick and fixing 4.8 mm thick plain/tinted sheet glass or 3MM thick aluminium composite panel with aluminium beading and rubber gasket/beading as directed including provision of one mortice lock for aluminium door (each)and 3 nos of alminim hinges of size 100mm and two aluminium tower bolts of 200mm size for each door fixed with rawl plug and handles 200mm including making good of floor/wall to match the existing surfaces all as specified and as directed by Engineer-in-Charge at site. (Sheet glass Plain/frosted/particle board/ACP sheet shall be measured and paid seperately )

Supply only 4.8mm thick plain glass fixed with beading in aluminium frame complete all as specified.

Supplying, fabricating & fixing aluminium powder coated glazed three track sliding window of frame 92mm x 31.75mm x 1.50mm and sliding shutter of section 40mm x 18mm x 0.91mm thick including 4mm thick sheet glass, ordinary quality exceeding 0.50 Sqm in each pane, in two track shutter and in one track stainless steel wire cloth, 0.30mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all fittings such as aluminium handle of size 100mm and locking arrangement with each moving leaf, complete all as specified & directed.

S&F aluminium Deco grill with powder coating (minimum thickness of powder coating 50 micron), 7.5 mm size DG-102, fixed to E/H frames, 1.5mm thick, bar size 6.2mm and 7.5mm thick in required sizes, complete all as specified and directed.

S&F aluminium partition wall of aluminium section 100mm x 44mm x 1.5mm thick frame rectangular section and including panel of 3mm thick ACP sheet or prelaminated board in bottom panel and 5.5mm thick sheet glass in top panel with rubber lining and aluminium beading around length including necessary fixing arrangement for bottom and top member of aluminium frame in floor/PCC/Brick work as per site requirement with rawl plug etc, including chromium plated steel screws 60cm centre to centre all as specified and directed by Engineer-in-Charge (Note : Cost of ACP sheet or prelaminated board and sheet glass shall be including in the item.)

S&F in repair toughened glass frameless door with fixed portion, of 12 mm thickness, including cutting holes, edges rounded etc and all kind of SS patch fitting & fixture, spider patch etc, complete all as specified.

S&F of stainless steel handle 450 mm long fixed to 12 mm thick toughned glass door with and including all fixing accessories i. e. bolt washer, adhesive etc, complete all as specified.

S&F of SS door lock, glass to glass type, suitable for 12 mm thick frameless toughned glass door with and incl all fixing accessories i. e. bolt, washer, screw, adhesive etc of suitable size, complete all as specified.

M & L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

Dismantling boarding, any description including fillets fixed in any position with nails and removed all as specified and directed

M&L 18 mm thick MDF board with both side laminated fixed with SS screws as in cupboard and cupboard shutters including leeping/beading fancy type and polish of the same 0.9 mm thick decorative laminate type 1,of surface finish, colour and other side white colour etc, complete all as specified and as directed.

All as per ser item No 41 above but 12mm thick but laminate finished with both side white as in cupboard drawer all as specified.

M&L IInd class hard wood for plain fillets, square, rectangular or traiangular in section clean sawn secured with nails or brads sectional area exc 3 Sqcm & n.exc 6 Sqcm for sides of CB and shutters inlcuding two coats of french polishing the same with required shade, etc., complete all as specified and directed

S&F telescopic type ball bearing slide & runner, suitable for drawers, complete all as specified.

S&F continious(Piano) hinges, mild steel,bright finish or electrogalanised.40mm width complete all as specified and directed

M&L 1st class hard wood (teak wood) wooden leeping/beading, wrought, fixed with nails all as directed.

S&F 100 mm long Extruded SS handles, fabricated type, polished complete all as specified.

S&F 40mm dia cup board/drawer SS knob fixed with screw complete all as specified.

S&F magnetic catcher suitable for cupboard, complete all as specified.

Dismantling mild steel work of any description not otherwise provided for by cutting the rivets or by gas cutting complete all as specified.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified.

S&F Pre-painted galvanume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of550 Mpa as in roof covering /clading to wall, fixed with self tappng screw complete all as specified.

S&F Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap with coach screw & washer in roof, wall etc. of 2mm thick complete all as specified.

S&F mild steel framed work conforming to Fe-410-O as in doors or gates of angle or other section with gusset plates,rails,braces,etc. complete drilled for fixing steel sheeting or other covering to be prepare for hanging including either hooks or hinges etc. complete all as spicified and directed.

S&F in repair of mortice lock vertical type 100mm size 4 lever with two keys with SS natural matt finish body with SS matt finish lock handles, complete all as per site requirement.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel over a coat red oxide paint complete all as specified.

M&L Mirror pollishing on kota stone/marbal where ever required to give high gloss finish complete all as directed by Engineer in charge. Note:-Complete work Grainding,Cleaning,washing as per Direction and site requirement.

S&F in repair Aluminium (Diecast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg complete all as specified.

S&F in repair Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring fixed in floor, complete all as specified.

SANJEEV ENTERPRISES (BID ID -3098489)

J D ENTERPRISES (BID ID -3105105)

sony engineering works (BID ID -3104890)

GLIBS CONSTRUCTION (BID ID -3101506)

ACR ENTERPRISES (BID ID -3103237)

B.R. Enterprises (BID ID -3104322)