138WE/L-77/24-25

Amount

Disconnecting electrical connection from the starter/panel for submersible pump set upto 7.5 HP capacity taking up motor and pump set including coloumn pipe from bore well for repair of unserviceable submersible pump/motor/ replacement/cleaning of coloumn pipe/ replacement of submersible cable and after repair of motor/pump/replacement of column pipe/replacement of submersible cable reinstalling the same and making necessary electrical connection and lowering the pump and motor including transporting testing and commissing etc all as directed by Engineer - in - Charge. Note : Spares parts required for repair of submersible pump/motor work will be measured in relevant item of BOQ

Supply only Gunmetal impellers suitable up to 10 HP Submersible pump

Supply only Gunmetal bush suitable for up to 10 HP Submersible pump

Supply only stainless steel sleeve suitable up to 10 HP Submersible pump

Supply only 'C' type bushes for impellers suitable up to 10 HP Submersible pump

Supply only Bowl case suitable up to 10 HP Submersible pump

supply only stainles steel impellor shaft suitable up to 10 HP submersible pump

M&L for flushing of borewell complete by using 210 CMF compressor and heavy duty driller machine to deliver the high air pressure at the bottom of the bore well and cleaning/flushing the bore well till the water is become free from any type of mud,dust and clear for portable use complete all as specified and directed by Engineer-in-Charge.

Taking down old unserviciable MS column pipe heavy duty (ERW) of size 50 mm with wall thicknes 5.04mm, length 3.0 mtr , both ends threaded with one socket confirming to IS 1239 (Part-I) 1979.

Supply and fixing MS column pipe heavy duty (ERW) of size 50 mm with wall thicknes 5.04mm, length 3.0 mtr , both ends threaded with one socket confirming to IS 1239 (Part-I) 1979 incl painted with two coat of black bituminous paint over a coat of red oxide primer in internally & externally (suitable for drinking purpose) Note :- Taking up of old coloumn pipe and lowering down of new column pipe shall be paid under respected item of BOQ

M&L for cleaining and descaling the column pipe of bore as available at site by wire brush incl painting the internally & externally of column pipe with two coats of black bituminious paint over a coat of red oxide primer after preperation of old paint (suitable for drinking water) complete all as specified and directed by Engr-in-Charge. Note :- Taking up/down of column pipe shall be paid under respected item of BOQ

M&L for PVC insulated and sheathed multi standard 3 core 6 sqmm flat 1100 volts grade electric copper sumbersible cable complete all as specified and directed by Engineer-in-Charge.

M & L for making a lorry filling point complete by RCC piller of size 45 cm x 45 cm x 3.95 mtr height with (1:2:4) type B1 using 20 mm graded stone aggregate alongwith Mild steel TMT bars 12 mm dia over cut to length ,bent to shape required ,including cranking ,bending spirally for hooping for columns hooking ends and bnding with mild steel wire annealed and 8 mm to 10 mm dia cut to length , bent to shape required in stirrups,spacers and binders and binding with mild steel wire annealed not less than 0.9 mtr dia,or securing with clips,as in pillar,,columns complete all as specified and as directed.

Taking up / down old DI/GI/PP-R tubing connection including clearing (from trenches) complete as directed by Engr-in-Charge of following size:

(i) 20mm bore

(ii) 25mm bore

(iii) 40 mm bore

(iv) 50 mm bore

Supply ,laying & testing GI tubing 50 mm bore medium grade conforming to IS : 1239 with all fittings laid in trenches / fixing on walls/fixing on pedestals complete all as specified and directed.

Supply ,laying & testing GI tubing 40 mm bore medium grade conforming to IS : 1239 with all fittings laid in trenches / fixing on walls/fixing on pedestals complete all as specified and directed.

Supply and fixing in replacement of 3-layer PP-R Polypropylene random copolymer concealed piper SDR 7.4 (PN-16) VU stabilized and antimicrobial dusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings 20 mm outer dia with all fitting laid in trenches or fixed to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of 3-layer PP-R Polypropylene random copolymer concealed piper SDR 7.4 (PN-16) VU stabilized and antimicrobial dusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings 25 mm outer dia with all fitting laid in trenches or fixed to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of 3-layer PP-R Polypropylene random copolymer concealed piper SDR 7.4 (PN-16) VU stabilized and antimicrobial dusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings 40 mm outer dia with all fitting laid in trenches or fixed to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of 3-layer PP-R Polypropylene random copolymer concealed piper SDR 7.4 ((PN-16) VU stabilized and antimicrobial dusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings 50 mm outer dia with all fitting laid in trenches or fixed to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

M&L for Elestometric Nytral rubber insulation to PP-R pipes suitable for 40mm outer dia 28/19mm thick with chicken wire mesh wire netting 25mm gauge, 20mm mesh with 0.01mm aluminium foil including jointing and fixing material such as solvent adhesive SR-998 complete all as specified and directed by Engr-in-Charge.

M&L for Elestometric Nytral rubber insulation to PP-R pipes suitable for 50mm outer dia 28/19mm thick with chicken wire mesh wire netting 25mm gauge, 20mm mesh with 0.01mm aluminium foil including jointing and fixing material such as solvent adhesive SR-998 complete all as specified and directed by Engr-in-Charge.

M&L for Elestometric Nytral rubber insulation to PP-R pipes suitable for 20mm outer dia 22/19mm thick with chicken wire mesh wire netting 25mm gauge, 20mm mesh with 0.01mm aluminium foil including jointing and fixing material such as solvent adhesive SR-998 complete all as specified and directed by Engr-in-Charge.

M&L for Elestometric Nytral rubber insulation to PP-R pipes suitable for 25mm outer dia 28/19mm thick with chicken wire mesh wire netting 25mm gauge, 20mm mesh with 0.01mm aluminium foil including jointing and fixing material such as solvent adhesive SR-998 complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable sluice valve 100 mm dia bore complete all as directed and specified.

Taking down old unserviceable gate valve/Ball Valve of size 20/25/40/50 mm bore complete.

Supply and fixing in replacement of PP-R gate valve (brass insert) for 50 mm dia pipe as per requirement of the site all as specified and directed. Make : SFMC/Prince or equivalent.

Supply and fixing in replacement of PP-R ball valve (brass insert) for 25 mm dia pipe as per requirement of the site all as specified and directed.

Supply and fixing in replacement of PP-R ball valve (brass insert) for 32 mm dia pipe as per requirement of the site all as specified and directed.

Supply ,fixing ,testing and commissionng double flanged non-rising stem type cast iron sluice valve suitable for 100 mm dia bore pipe with hand wheel and suitable for pressure rating of PN :1.6 duly drilled holes for fixing of nuts and bolts ,stem made of high tensile brass ISI marked and conforming to IS including rubber gasket ,nuts,bolts and washer complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for laying of water pipe lines/taking out pipe lines and getting out in hard/dense soil including forming bottom surface to required level and slope all as specified and as directed.

Returing ,fiiling in including spreading ,leveling ,watering and well ramming in layers not exe. 25 cm thick in soils complete all as specified and as directed.

Removal of surplus soil to a distance not exceeding 50 m and doepositing where directed at a level not exceeding 1.5 m above the strarting point complete all as specified and as directed.

Split opening the submesible motor 5HP capacity and taking out worn out winding and rewinding with copper winding wire as per existing gauge including overall insulation and including replacement of defective parts intermediate sheet bottom and top thrust plate, support bush, oil seal, diaphram, 'O' ring, Key, sand guard and stud and nut complete reassembling the motor and M&L for worn out shaft sleeve ,impeller, bearing, bushes, etc and M & L for machining (remetalling, grinding, etc) the shaft and turning, polishing to shaft supply and fixing suitable size gun metal bushes etc reassembling the pump completely all as directed by Engineer - in - Charge. Make of winding wire ATLAS or equivalent in ISI marked make as approved by GE

Split opening the submersible motor 7.5HP capacity and taking out worn out winding and rewinding with copper winding wire as per existing gauge including overall insulation and including replacement of defective parts intermediate sheet bottom and top thrust plate, support bush, oil seal, diaphram, 'O' ring, Key, sand guard and stud and nut complete reassembling the motor and M&L for worn out shaft sleeve ,impeller, bearing, bushes, etc and M & L for machining (remetalling, grinding, etc) the shaft and turning, polishing to shaft supply and fixing suitable size gun metal bushes etc reassembling the pump completely all as directed by Engineer - in - Charge. Make of winding wire ATLAS or equivalent or equivalent in ISI marked make as approved by GE

S&F in repalcement DOL starter 3 phase 415 V suitable for 5 to 10 HP, 9-13 to 12-18 Amps complete all as specified and as directed.

M/S ASGAR ALI TIMBER SHOP (BID ID -3115994)