Annual Maintenance Contract for all type of civil work in NML Housing Complex Agrico, Tuiladungri, C. H. Area and Pipeline for the year 2019-20 and 2020-2021

Amount

Dismantling doors, windows shutters including chowkhats,architrave, holdfasts,etc. complete and stacking disposal of material as per direction of EIC. Of area 3sq. Metres and below

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres as per direction of EIC Nominal Concrete Mix 1 :3:6 or richer mix.

Demolishing reinforced cemenrt concrete manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metre lead as per direction of EIC.

Demolishing Brick work in cement mortar manually/ by mechanical means including stackng of serviceable material and disposal of unserviceable material with in 50 metre lead as per direction of EIC. In Cement Mortar.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground with in 50 metre lead.

Dismantling GI pipes (External work) including excavation and refilling trenches after taking out the pipes , manually /by mechanical means including stacking of pipes within 50 metre lead as per direction of Engineer In Charge. 15 mm to upto 40mm nominal bore

Dismantling GI pipes (External work) including excavation and refilling trenches after taking out the pipes , manually /by mechanical means including stacking of pipes within 50 metre lead as per direction of Engineer In Charge. Above 40mm nominal bore

Demolishing tiles work in floors and roofs laid in cement mortar including stacking material within 50 metre lead.thickness of tiles 10 mm to 25 mm

Dismantling steel work in single section including dismembering and stacking within 50 metreleadin:Channels,angles,tees and flats .

Dismantling CI pipe Including excavation and refilling trenches after taking out the pipes , manually / by mechanical means breaking lead caulked joints , melting of lead and making in to blocks including stacking of pipes & lead at site with in 50 metre lead as per direction of engineer in charge : up to 150 mm diametre:

Supply Chemical emulsion in sealed containsers including delivery as specified.Chlorpyriphos/Lindane emiulsifiable concentrate of 20 % .

Supplying and filling plinth with sand under floor including watering, ramming, consolidating and dressing,complete.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains(not exceding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottom,lift up to1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within alead of 50 m.All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, side of foundations etc. in layer not exceeding 20 ems in depth: consolidating each deposited layer by ramming and watering, lead upto 50m and lift uoto 1.5m.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work uoto plinth level. 1:2:4 (1cement:2coarse sand: 4graded stone aggregate 20mm nominal size.)

Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finishing and reinforcement- all work up to plingth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

RCC work in walls, beam suspended floors, roofs having slop up to 15 degree landing , balconies, shelves, chajja, lintels, bands, plain window sill ,stair case and spiral stair cases above plingth level up to floor five level excluding cost of centering,shuttering,finishing and reinforcement. 1:1.5:3 (1cement:1.5coarse sand:3graded stone aggregate 20mm nominal size.)

Extra for additional height in centering , shuttering where ever required with adequate bracing , propping etc. including cost of deshuttering and decentering at all levels, over a height of 3.5 m , for every additional height of 1 metre or part thereof (Plan area to be measured): Suspended floors , roofs landing , beam and balconies(Plan area to be measured)

Steel reinforcement for RCC work including straightening, cutting bending, placing in position and binding all complete above plinth level.Thermo- Mechanically Treated Bars Fe -500 D or more

Centring and shuttering including strutting,propping,etc. and removal of form for: Foundation,footings,bases of columns,etc.

Centring and shuttering including strutting,propping,etc. and removal of form for: Suspended floor ,roof ,landing , shelves, beams, columns balconies,etc.

Centring and shuttering including strutting,propping,etc. and removal of form for: Weather Shade, chajjas,corbels,etc. including edges

Brick work with common brunt clay F.P.S (Non Modular ) bricks of class designation 7.5 in foundation and plingth: in Cement mortar 1:6 (1cement : 6 coarse sand)

Brick work with common brunt clays F.P.S (non modular) brick of class designation7.5 in super structure above plingth level upto floor V level in all shapes and sizein cement mortar 1:6 ( 1Cement : 6 Coarse Sand).

Half brick masonary with common burnt cly F.P.S (non Modular ) brick of class designation75 in super structure above plingth to floor V level. Cement mortar 1:4(1 cemt : 4 coarse sand)

Structural steelwork single section, fixed with or without connecting plate , including cutting ,hoisting , fixing in position and applying a priming coat of approved steel primer all complete.

Structural steelwork riveted,bolted or welded in builtup section, trusses and framework including cutting hoisting and fixing in position and applying priming coat of approved steel primer all complete.

P/F MS grill of required pattern in frames of windows etc. with M.S flats ,square or round bars etc.including priming coat with approved steel primer all complete.Fixed to openning /wooden frame with rawl plugs screws etc.

Providing & fixing 18 mm thick gang saw cut mirror polished Granite machine cut for kitchen plate form vanity counters,window sill, facias and similer location of requered size of approved shade , colour and texture laid over 20 mm thick base cement morter 1:4 with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels----Granite of any any colour and shade. Area of Slab over 0.50 sqm

Extra for fixing marble/granite stone over and above corresponding basic item, in facia and drops of width upto 150mm with epoxy resin based adhesive includina clean etc. complete

P/F 1st quality ceramic glazed wall tiles conforming to IS : 15622 of (thickness to be specified by manufacturer) of approved make in all colours, shadess except burgundy, bootle green, black of any size as approved by Engineer in change, in skirting, risers of steps and dados over 12mm thick bed of Cement morter 1:3 (1cement: 3 Coarse sand) and jointing with gray cement slurry @ 3.3 kg per sqm incl. pointing with white cament mixed with pigment of matching shade complete.

Cement concrete flooring 1 :2:4 finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 1 :2:4 with floating coat of neat cement punning. 40mm thick with 20 mm nominal size stone aggregate.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screw, excluding panelling which will be paid for separately ,all complete as per direction of Engineer in Charge.Second class teak wood 30 mm thick (Note:Butt hinges and necessary screw shall be paid separately)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick .PLy wood 5ply,9 mm thick,Decorative plywood both side decorative veneer(Type-1) conforming to IS 1328 BWR type.

Providing and fixing IS: 12817 marked stainless steel butt hinges stainless steel screw etc. complete: size 100x58x1.9mm

Providing and fixing IS: 12817 marked stainless steel butt hinges stainless steel screw etc. complete: size 75x47x1.8 mm

P/F ceramic glazed floor tiles of size 300x300 (thickness to be specified by manufacturer) 1st quality conforming to IS : 15622 of approved make colours, such as White , Ivory , Grey,Fume Red Brown, Laid on 20mm thick cement mortar 1:4 (1cement: 4 Coarse sand) and jointing with gray cement slurry @ 3.3 kg per sqm incl. pointing the joints with white cement mixed with pigment of matching pigments etc., complete.

12mm cement plaster of mix. 1:4 (1cement : 4 coarse sand)

15mm cement plaster on rough side. 1:4 (1cement : 4 coarse sand)

6 mm cement plaster for ceiling of mix 1:3. (1cement : 3 fine sand)

Neat cement punning.

Finishing walls with waterproofing cement paint of required shade :old work (one or more coat applied @ 2.20kg/10sqm.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth .

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Water thinnable cement primer

Painting with aluminium paint of approed brand and manufecture to give an even shade: Two or more coats on new work .

Applying priming coat with ready mix pink or grey primer of approved brand and manufecture on wood ( hard and soft wood on wood work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two or more coats on new work

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONALAlong external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration anti-termite treatment (excluding the cost of chemical emulsion) :

White washing with lime to give an even shade (old work) two or more coats.

Finishing walls with Acrylic Smooth exterior paint of required shade . Old Work (Two or more coat applied @ 1.67 ltr/10sqm) on existing cement paint surface.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth inculding necessary repairs to scratches etc. complete

Providing and fixing on wall face unplasticised Rigid PVC rain water conforming to IS-13592 Type A, including jointing with seal ring conforming to IS: 5382, 75 mm dia

Providing and fixing on wall face unplasticised Rigid PVC rain water conforming to IS-13592 Type A, including jointing with seal ring conforming to IS: 5382, 110mm dia

Providing and fixing PVC moulded fittings/accessories for unplasticised Rigid PVC pipes rain water pipes conforming to IS:13592 type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion . Bend 87.5 degree size 75 mm bend.

Providing and fixing PVC moulded fittings/accessories for unplasticised Rigid PVC pipes rain water pipes conforming to IS:13592 type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion . Bend 87.5 degreesize 110 mm bend.

Providing and fixing PVC moulded fittings/accessories for unplasticised Rigid PVC pipes rain water pipes conforming to IS:13592 type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion . Shoe (Plain) size 75 mm.

Providing and fixing PVC moulded fittings/accessories for unplasticised Rigid PVC pipes rain water pipes conforming to IS:13592 type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion .Shoe (Plain) size 110 mm .

Providing & fixing anodised aluminium work for doors, windows, ventilators, and partion with extruded built up standard tubular sections/ Zsection and other section of approved make conforming to IS 733 and IS 1285,fixed with dash fasteners of required dia and size , including necessary filling up the gaps at junction ,i.e at top , bottom and sides with required EPDM rubber /neropene gasket etc. Aluminium section shall be smooth ,rust free,straight,mitred and jointed mechanically whereever requred including cleat angle, aluminum snap beading for glazing/panelling, C.P brass /stainless steel screw, all complete as per architectural drawing and the direction of Engineer in Charge(Glazing and panelling to be paid for separately):For fixed Portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing & fixing anodised aluminium work for doors, windows, ventilators, and partion with extruded built up standard tubular sections/ Zsection and other section of approved make conforming to IS 733 and IS 1285,fixed with dash fasteners of required dia and size , including necessary filling up the gaps at junction ,i.e at top , bottom and sides with required EPDM rubber /neropene gasket etc. Aluminium section shall be smooth ,rust free,straight,mitred and jointed mechanically whereever requred including cleat angle, aluminum snap beading for glazing/panelling, C.P brass /stainless steel screw, all complete as per architectural drawing and the direction of Engineer in Charge(Glazing and panelling to be paid for separately):For shutter of doors,window & ventilators including providing and fixing hinges /pivot and making provision for fixing of fitting wherever required including the cost of EPDM rubber /neropane gasket required (Fittings shall be paid for separatly ) Anodised Aluminium(anodised transparent or dyed to required shade according to IS :1868, Minimum anodic coating of grade AC 15)

Providing & fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S gusset plates at the junctions and corners , all necessary fitting complete including applying a priming coat of approved steel primer.Using M.S angle 40x 40x6 mm for diagonal braces.

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.

Grading roof for water proofing treatment with cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) with waterproofing material.

Providing & laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement: 2 fine sand) including testing of joints,etc. complete.150 mm dia R.C.C pipe

Providing and fixing white vitreous china water closet approved make. Orissa pattern WC pan 580 x 440mm

P/F GI union in GI pipe including cutting and threading the pipe and making long screws etc. complete (New Work)15mm NB

P/F GI union in GI pipe including cutting and threading the pipe and making long screws etc. complete (New Work)20mm NB

P/F GI union in GI pipe including cutting and threading the pipe and making long screws etc. complete (New Work)25mm NB

P/F GI union in GI pipe including cutting and threading the pipe and making long screws etc. complete (New Work)40mm NB

P/F GI union in GI pipe including cutting and threading the pipe and making long screws etc. complete (New Work)50mm NB

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the wall etc.15 mm dia NB

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the wall etc.20 mm dia NB

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the wall etc.25mm dia NB

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the wall etc.40mm dia NB

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the wall etc.50mm dia NB

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c making good the walls etc. Concealed pipe, including painting with anti corrosive bitumastic paint,cutting chases and making good the wall:15 mm dia NB

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c making good the walls etc. Concealed pipe, including painting with anti corrosive bitumastic paint,cutting chases and making good the wall:20 mm dia NB

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.50 mm dia NB

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.80 mm dia NB

Making connection of GI distribution branch with GI mains of following sizes by providing and fixing TEE/elbow/bend, including cutting and threading the pipe etc. complete.25 to 40mm dia

Making connection of GI distribution branch with GI mains of following sizes by providing and fixing TEE/elbow/bend, including cutting and threading the pipe etc. complete.50 to 80mm dia

P/F C.P brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15mm nominal bore

P/F C.P brass stop cock (concealed) of standrad design and of approved make conforming toIS 8931 15mm nominal bore

Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Enginineer-in-charge, beeyound 50 m initial lead for all leads including all lifts involved.

Providing and laying four course water proofing treatments with bitumen felt over roofs consisting of first and third course of blown bitumen 85/25 or 90/15 conforming to IS :702 applied hot @1.45 kg per square metre of area for each course ,second course of roofing felt type 3 grade -I (hessian based shelf finished bitumen felt)and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre , including preparation of surface but excluding grading complete with : Bitumen felt ((hessian base) type 3 grade I conforming to IS : 1322

Providing & Fixing of ISI marked flush door conforming to to IS 2202(Part-1) non decorative type core of block board construction with frame of 1st class hard wood and well matched mmercial 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters, : 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws bright finished M.S. Piano hinges IS : 3818 marked with necessary screws

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931-15mm nominal bore

Lettering with black japan paint of approved brand and manufecture

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :75 mm dia pipe

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :110 mm dia pipe

Providing and fixing brass bib cock of approved quality :15mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)

Supply of PVC Waste Pipe for sink or wash basin including PVC waste fittings complete of approved quality.Flexible 32mm

Supply of PVC Waste Pipe for sink or wash basin including PVC waste fittings complete of approved quality.Flexible 40mm

Supply of 600 x 120 x 5mm glass shelf with edges rounded off supported on CP frame with C.P. brass brackets and guard rail complete of approved quality and design etc.

Supply of C.P Bibcock as per specification conforming to IS:8931 of approved quality :size 15mm NB

Supply of un-plasticised PVC connection pipe with brass unions of approved quality. 30cm length of 15mm NB.

Supplying and stacking good earth at site including royalty and carriage upto 1KM ( Earth measured will be reduced by 20%)

Supply Of 4'' C.P grating of approved quality.

Supply of C.P. brass towel rail complete with brackets and necessary screws of approved quality etc. 600mm long towel rail with total length of 645mm, width 78mm, weighing not less than 190 gms.

Supply of C.P. brass waste coupling (32mm to 40mm) for wash basin/ kit. Sink of approved quality and colour.Waste coupling 38mm of 83mm length and 77mm breadth, weighing not less than 45 gms.

Supply of brass gate valve (Zoloto Make).15mm NB

Supply of brass stop cock (Zoloto Make).15mm NB

Supply of brass gate valve (Zoloto Make).25mm NB

Supply of brass gate valve (Zoloto Make).40mm NB

Supply of brass gate valve (Zoloto Make).50mm NB

Supply of C.P Two way bib cock 15 mm dia of approved quality.

Supply of Hndfaucet of approved quality -15 mm inlet

Supply of C.P. brass Bottle trap including all fittings & fixtures for wash basin, Sink and urinal of approved quality and colour.Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263 gms.

Supply of Steel Sliding Bolt with necessary screw of appreved quality and design. Size 250 x12 mm

Supply of steel safety lock for Cup board shutter for approved quality and design.-50mm

Supply of M.S Peg stay for steel window with necessary fittings and nut bolts- 300 mm length.

Supply of M.S handle for steel window with necessary fitings and nut bolts- size 125 mm length.

P/F chicken mesh on the masonary or RCC work as per the direction. The chicken mesh should be fixed with nails/screws to the wall or RCC.

Supply of white cement based putty of appeoved brand .

Supply of fly proof wire gauze to windows,clerestry windows & doors with stainless steel ( grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperature on both sides

Replacing and fixing a pair of M S Angle Bracket. Size 50x50x6 including removing the existing system and refixing the same as per actual.

P/Fixing 110 mm dia PVC P- Trap of approved quality.

Supply of roller in Aluminiun Cupboard Shutter of approved quality.

Supply of lock in Aluminiun Cupboard Shutter of approved quality.

Supply of C.P Shower Rose 100 mm Dia of approved quality and design.

Supply of 1/2'' C.P arm 9'' long for shower of approved quality and design.

Providing and fixing 15mm dia. C.P. nipple of 50mm length.

Supply of PVC long bend for PVC Low Down Cistern with all fittings complete.

Supply of Steel handle 100 mm length required colour or shade with necessary screw etc. complete.

Supply of magnet with necessary screw etc. complete.

Providing,laying and fixing 50mm dia PVC pipe for waste connection of wash basin,toilet,etc.complete as directed by EIC.

Supply Of Nylone Washer for 15 mm Bib Cock & Piller Cock.

Supply Of Cistern Internal Fitting of PVC Low Level Flushing Cistern of approved quality.

Supply Of 15 mm Brass spindle For CP brass Bib Cock &Conceal Stop Cock/Piller Cock of approved brand.

Repairing /restoring the existing damaged steel door by fabrication/welding/fixing the required materials such as MS sheet, flat, angle fittings etc. (to be paid separately) including dismantling and re fixing as directed by engineer-in-charge.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. Old work (two or more coats) including removing, scrapping, sand papering and preparing the surface smooth including necessary repairs with plaster of paris where necessary, etc complete.

Diluting and injecting chemical emulsion for post construction anti-termite treatement (Excluding the cost of chemical Emulsion):Along the external and internal wall below concrete or masonary apron/ floor using chemical emulsion @ one liter per hole apart 300 mm including drilling 12 mm dimeter and plugging with cement mortar 1:2 (1 cement : 2 sand) to the full depth of hole.With Chlorpyripos/ Lindance E.C. 20% with 1% concentration.

Supply of 1 mm mm thick aluminium sheet for door shutter etc.

Supply of brass ball cock with brass rod of approved quality high or low pressure with plastic floats complte: 15 mm Nominal Bore.

Supply of brass ball cock with brass rod of approved quality high or low pressure with plastic floats complte: 20 mm Nominal Bore.

Supply of brass ball cock of approved quality high or low pressure with plastic floats complte:25 mm Nominal Bore.

Supply & Fixing PVC Water Tank Cover for 500 litre to 1000 litre capacity with clamp of approved brand .

Providing and fixing 19 mm thick block board (century make) for cup board shutter including complete as directed.

Scaffolding with bamboo for specified jobs as per direction Engineer -In Charge .

Supply of 4 mm plain ply of approved brand.

Supply of bitumen, grade 85/25 or 90/15 of approved brand.

Supply of stainless steel A ISI 304 (18/8) kitchen sink as per IS 13983( Make- Nirali large glossy) :Kitchen sink without drain board -610x510 mm bowl depth not less then 200mm .

Supply of a pair of white vitreous china foot rest of standard pattern for squatting pan water closet: 250x130x30 mm

Supply of solid plastic seat with lid and fitting for pedestal type W.C pan complete .White solid plastic seat with lid

Supply of white vitreous china laboratory sink of approved brand : Size 600x450x200mm

Supply of white vitreous china wash basin of approved brand:Flat back wash basin of size 550 x 400mm.

Supply of 600 x 450mm bevelled edge mirror of superior glass (of approved quality) with 6mm thick hard board ground with C.P. brass screws and washers.

Supply of CP brass toilet paper holder of aooroved brand with 40mm long screws, etc.

Supply of P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231 with all fittings and fixtures including .10ltr capacity -white.

Supply of ISI marked flush door conforming to to IS 2202(Part-1) non decorative type core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters, : 30mm thick

Supply of wood for frames of doors, windows, clerestory windows and other frames.Sal wood(Seasoned).

Supply of IS : 12817 marked Stainless Steel Butt Hinges(heavy weight) with necessary SS screws,etc complete. 125 x64x2.50 mm

Supply of glass panes of approved quality . Float Glass panes of nominal thickness 4mm thickness(weight not less than 10kg/sqm.

Supply of Stainless steel tower bolts,with necessary screws etc. Size 200x10mm

Supply of Stainless steel tower bolts, with necessary screws etc. Size 150x10mm

Supply of Stainless steel handle of approved quality and design with necessary screw etc. complete. Size-150mm.

Supply of Stainless steel handle of approved quality and design with necessary screw etc. Size-100mm.

Supply of stain less steel waste coupling (100 mm to 125 mm) for kitchen Sink of approved quality and colour.

Supply of MS Flat Clamp for PVC pipe /C I pipe size -110 mm dia.

Supply of MS Flat Clamp for PVC pipe /C I pipe size -75 mm dia.

Supply of Cast Iron Grating (Square Pattern) size -150 x150 mm

M/S.A.B.CONSTRUCTION