NTHPC upgradation and renovation of Allopathic Disp. mandli

Amount

Removing white or colour wash by scrapping and sand papering andpreparing the surface smooth including necessary repairs to scratches etc. complete.

Distempering with oil distemper of approved brand and manufacture (twoor more coats) and of required shade on new work, over and includingwater thinnable priming coat to give an even shade

Finishing walls with water proofing cement paint of required shade Old work (one or more coats applied @ 2.20 kg/10sqm) overpriming coat of primer applied @ 0.80 liters/10sqm completeincluding cost of priming coat.

12 mm Cement plaster in 1 : 4 ( 1 cement : 4 fine sand)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Wiring for light point/fan point/exhaust point/with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class pvc conduit with paino type switch ,phenolic,laminated sheet,suitable size ms box, and earthing the point with 1.5 sq mm ,FRLS pvc insulated copper conductor sigle core cable etc required. (wire make ISI marked havells/anchor/HPl)

Wiring for circuit /sub main wiring along with earth wire with the following sizes of FRLS PVC isulated copper conductor ,single core cable,in surface /recessed medium class PVC conduit as required.( Wire make ISI markedShalimar/ Havells/Anchor/HPL . 2x2.5+1x2.5 sq m

Wiring for light /power plug with 2x4 sq.mm FRLs PVC Insulated Copper conductor single core cable in surface/ recessed medium class PVC conduct along with 1no. 4Sq.mm FRLs pvc insulated copper conductorsingle core cable for loop earthing as required

Supply and fixing suitable GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 and 15/16 A modular socket outlet 15/16 A modular switch connection etc as reqd

Suppling and fixing 5A to 32A rating, 240/415 V , 10 kA, "C" Curve , miniture circuit breaker suitable for inductive load of following poles in the existing MCB, DB complete with connection, testing and commissioning etc as reqd

1200mm size 18/20W LED batten Tubelight fitting

Supply and fixing 9W LED lamp

Supply of ceiling fan 230V 50Hz with double ball bearing with low power consumption of following sweeps including fan regulators

Supply and fixing of main service line 16sqmm twin core aluminium cable unarmoured from the LT pole upto the MCV/DB including connection etc as reqd

Supply and fixing following way single pole and neutral sheet steel MCB distribution board, 240V , on surface / recess complete with tinned copper bus bar neutral bus bar, earth bar interconnections power painted including earthing etc as reqd ( without MCB/RCCB/Isolators)

Supply and fixing following modular switch / socket on the existing modular plate , and switch box including connections but excluding modular plate etc as reqd

5/6A switch

3Pin 5/6A socket outlet

Supply and fixing modular blanking plate on the exising modular plate and switch box excluding modular plate as reqd

Supplying and fixing suitable G.I. box with modular plate and cover in front on surface or in recess , including providing and fixingg 3 Pin 5/6 A modular socket outlet and 5/6A modular switch connection etc as reqd

Wiring for light/ power plug with 2 x 4 sqmm FRLs PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 no 4 sqmm FRLs PVC insulated copper conductor single core cable for loop earthing as reqd

Supplying and Fixing of following rating 240/10KA"C" curve , minature circuit breaker suitable for inductive load of following poles in the existing MCB/ DB complete with connections , testing and commissioning as reqd

Providing and fixing panelling or panelling and glazing in panelled or panelledand glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to bemeasured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 4mm thick glass pane(wt not less than per sqm)

Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame anddiagonals braces of 40x40x6mm angle iron, 3mm M.S. gusset plates at thejunction and corners, 25mm dia pulley, 40x40x6mm angle and T-iron guideat the top and bottom respectively including applying a priming coat ofapproved steel primer

Providing and making CIB of approved size by way of making another layer of 12 mm thick plaster with 1:4 cement mortar on front side outer plastered surface, painting and writings as per the direction of engineer in-charge including supply of materials, carriages all complete. L.M.R.

TILAK RAJ

RASAL CHAND GOVT CONTRACTOR