PROVN OF GUARD ROOM WITH TOILET AND BATHROOM AT CARIAPPA COLONY AND BHAGAT COLONY AND PROVN OF PLATFORM FOR LOADING/UNLOADING OF VEHICLES NEAR GATE NO. 4 AND INTERLOCKING PATHWAY AND FALSE CEILING AT HELIPAD LOUNGE AT NASIRABAD MIL STATION

Amount

Surface excavation in any type of soil not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified

Excavation over areas not exc 1.5m deep and getting out in soft/loose soil all as specified and as directed.

Excavation in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes etc not exc 10 Sqm on plan and getting out in any type of soil (soft & loose/hard & dense soil) , complete, all as specified & directed.

Excavation in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes etc not exc 10 Sqm on plan and getting out in soft/disintigrated rock, complete, all as specified & directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil, complete, all as specified & directed.

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point, complete, all as specified & directed.

M&L for PCC 1:4:8, type D2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete, all as specified & directed.

M&L for reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete, all as specified & directed.

All as per description of serial item No. 8.00 here-in-before but 8 mm dia bar.

All as per description of serial item No. 8.00 here-in-before but 6 to 10mm dia in stirrups, spacers and binders.

S&F rolled mild steel work as in Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment including necessary welding etc. conforming to Gde E-250 (Fe 410-W) quality `A’ all as specified and as directed.

M&L for reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate in foundations including rafts, footings, foundation beams, bases for columns, mass concrete and the like, complete, all as specified & directed. .

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished flat surfaces of concrete, complete, all as specified & directed.

M&L for reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate in columns, pillars, piers, posts, struts and the like, complete, all as specified & directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal for rough finished flat surfaces of concrete, complete, all as specified & directed.

M&L for reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate in lintels over 1.5m clear span, seismic and other similar bands, lintel bands, plinth bands, roof bands and the like, complete, all as specified & directed.

Formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete, complete, all as specified & directed.

M&L for reinforced cement concrete M-25 grade (Design mix) using 20mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like, complete, all as specified & directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete, complete, all as specified & directed.

Formwork to edges of concrete flats, roofs, floors etc and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide for rough finished surfaces, complete, all as specified & directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:6 complete all as specified & as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exc 20mm, lime or sand stone.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6, complete, all as specified & directed.

M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls , built in cement mortar 1:4, complete, all as specified & directed.

Supply only integral water proofing compound (ISI marked).

M&L for APP modified polymeric water proofing membrane, 2 mm thick having centre core not less than 100 micron high molecular high density polythelene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 3 Kg/Sqm applied with bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.2 Kg/Sqm over bitumen primer conforming to IS-3384 @ 0.40 Kg/Sqm with final coat of bonding bitumen grade 85/25 @ 1.2 Kg/Sqm over APP membrane with all overlaps, complete, all as specified & directed.

M&L for rendering 10mm thick in cement mortar 1:4 on roof top surfaces, mixed with water proofing compound as per manufacturer's instruction, finished even & smooth without using extra cement, complete, all as specified & directed.

M&L for 40mm thick (average consolidated thickness) type B0 using 12.5mm graded stone aggregate as in padding even and smooth without using extra cement with existing slope with 'V' shaped grooves 6mm wide and 10mm deep @ 1.2m interval or part thereof, both ways on top of padding and filled with mastic bitumen of 1:1 proportion, complete, all as specified & directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement, complete, all as specified & directed.

M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement, complete, all as specified & directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of primer, complete, all as specified & directed.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement, complete, all as specified & directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over & including 1 mm thick finished coat of white wall care putty, complete, all as specified & directed.

M&L for preparation of newly plastered surfaces of walls & applying three coats of white wash, complete, all as specified & directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete, complete, all as specified & directed.

M&L for preparation of newly plastered surfaces of ceiling & applying two coats of cement base paint of approved shade/tint, complete, all as specified & directed.

M&L for preparation of newly plastered surfaces of ceilings & applying three coats of white wash, complete, all as specified & directed.

M&L for glazed ceramic tiles (coloured) 7mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete, all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 ,complete, all as specified and directed.

M&L for machine cut Kota stone slab flooring 20 to 25mm thick as in shelving/window cills or steps in single piece laid over & including screed bed or bedding layer of 15mm thick in CM 1:6 including necessary bull nosing, fixed to wall and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete, all as specified & directed.

M&L for 75 mm thick PCC (1:4:8), type D2 using 40 mm graded crushed stone aggregate as in sub base of floor, surface finished fair and even,complete, all as specified & directed.

M&L for machine cut Kota stone slab flooring 20 to 25mm thick & 550x550mm size, laid over & including screed bed or bedding layer of 15mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete, all as specified & directed.

M&L for machine cut Kota stone slab 20 to 25mm thick on vertical surfaces such as dado, skirting, cills etc. laid over & including screed bed or bedding layer of 10mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete, all as specified & directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour single piece extruded PVC profile reinforced with MS square tube in opening as per specifications.

S&F factory made solid panel PVC moulded door shutter with particle board core, 28 to 30mm thick (styles) with 2 raised panel design with 2 mm thick moulded PVC sheet on front face & 2mm thick plain colour PVC frame sheet on back face and fixing in frame at site, complete, all as specified & directed.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked), complete, all as specified & directed.

S&F extruded aluminium alloy handle, 150mm size, cast type, anodized (ISI marked), complete, all as specified & directed.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete, all as specified.

S&F butt hinges of size 100 mm medium weight, cold rolled mild steel ISI marked, complete, all as specified & directed.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer, complete, all as specified & directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete, all as specified & directed.

Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete, all as specified & directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer, complete, all as specified & directed.

S&F plain, solid, straight chowkats and frames of second class hardwood, wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints, complete all as specified & directed.

M&L for prelaminated MDF board, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete, all as specified & directed.

Extra over rates of block board or veneered particle board for 6mm thick external teak wood lipping, complete, all as specified & directed.

S&F magnetic striking plate as per sample approved and directed by Engr-In-Charge.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws.

Supply & fixing hasp and staple of size 100mm aluminium anodized safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified.

S&F aluminium handle, 100mm size, cast type, anodized (ISI marked) complete all as specified.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints laid in trenches or in floors or fixed to wall with clamps, complete, all as specified & directed. .Note :- Excavation, earthwork and wall clamps shall be measured & paid for separately.

All as per description of serial item No. 61.00 above but 75mm bore pipe.

S&F 110 mm bore PVC (SWR) junction single (single ‘T’), equal or unequal with oval access door.

S&F 75mm bore PVC (SWR) bend, any radius with access door.

S&F 110mm bore PVC (SWR) bend, any radius with access door.

S&F 110 mm bore PVC (SWR) vent cowl.

S&F PVC (SWR) Gully trap 125/110mm, setting and jointing with solvent cement, complete, all as specified & directed.

S&F PVC (SWR) floor trap plain with PTMT grating including jointing with solvent cement, diameter of outlet 75mm, complete, all as specified & directed.

S&F vitreous china wash hand basin, white, flat back of size 580mm x 450mm with including 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete, all as specified & directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white, including plastic white cover closed pattern with flat bottom and mild steel chromium plated hinge device including connections to drain (or outgoing pipe ) and to flushing pipe anti syphonage pipe etc complete all as specified and directed

S&F PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle, complete, all as specified & directed.

S&F vitreous china urinal, flat back, half stall type, white including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia, complete, all as specified & directed.

S&F PVC connection 450 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides, complete, all as specified & directed.

S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) of 1000 litre capacity, triple layered, hoisted and fixed in position, complete, all as specified in SSR Part - I and as directed. Note :- (i) The unit rate quoted by tenderer shall be deemed to insulate water tank with GI pipe medium grade 10cm long projected inside and outside of tank with bore suitable for inlet and outlet, GI pipe 20mm bore medium grade projecting 10cm inside and outside of the tank for over flow, GI pipe 20mm bore medium grade projected 10cm inside and outside of tank for vent & mosquito cover for vent/overflow pipe.

S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms), complete, all as specified and directed.

M&L for galvanized steel water tubing medium grade of 25 mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors, complete, all as specified & directed.

All as per serial item No. 77.00 here-in-above but of 20 mm bore pipe.

All as per serial item No. 77.00 here-in-above but of 20 mm bore pipe laid in trenches.

All as per serial item No. 77.00 here-in-above but of 15 mm bore pipe.

S&F 25 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipecomplete, all as specified & directed. .

S&F 20 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipecomplete, all as specified & directed. .

S&F 15 mm bore bib tap, cast copper alloy, fancy type,chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete, all as specified & directed.

S&F brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore all as specified and as directed.

S&F 15mm bore angle stop valve fancy type of cast copper alloy chromium plated screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union, complete, all as specified & directed.

S&F 15mm bore Stop valve, fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union, complete, all as specified & directed.

S&F brass chromium plated shower rose 125 mm size with swivel joint including fixing to steel pipe of 15mm bore or union, complete, all as specified & directed.

S&F tubular towel rail, aluminium anodized, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete, all as specified & directed.

S&F soap dish holder (Cat Part No ACN-1131N of make - Jaquar or equivalent of Marc/Parryware/Somany/Parko/Gem/Prayag) complete all as specified & as directed.

M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface, complete, all as specified & directed.

M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection, surface finished fair and even, complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 2 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:1).

S&F mild steel framed work such as grills, gratings, guard bars, barred iron doors, cooler stand, framework of water tanks and similar works, conforming to Grade E-165 (Fe 290), including welding etc. complete all as specified & as directed.

S&F butt hinges of size 100mm extruded aluminium alloy with galvanized mild steel hinge pin, anodized type B-21, complete, all as specified.

M&L for factory made 60mm thick machine pressed precast cement concrete interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment laid over & including 50 mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.

M&L for providing precast cement concrete type C1, 1:3:6 using 20 mm graded crushed stone aggregate as in kerb stone, window or door cills, lintels, bressumers, step quoin blocks etc of any section with plane fair faces including chamfers, weathering, throating and necessary excavation etc and setting and jointing in cement mortar 1:4, complete, all as specified and as directed by the Engr-In-Charge.

S&F informatory sign board in reqd size and each sign board made of two 4mm thick aluminium composite panel both side face to fully covered with 3 m scotchlight brand high intensity prismatic grade recto reflective sheet shall be ASTM D4956 type IV in required colour. The retro reflective sheet shall be processed on ACP by 3m equipment heat lamp vaccum applicator and latter.

M&L for PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate in bedding to SGSW drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe, complete, all as specified and directed.

Supply & laying reinforced concrete pipes, class NP2, 150mm bore laid and jointed, complete with collar and as directed by Engineer-In-Charge.

M&L for cement concrete (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in surface channels, drains & copings, rounded or chamfered on edges all as specified & directed.

M&L for precast RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in CM (1:6) complete all as specified & as directed.

S&F aluminium door shutters with frame of aluminium section weighing not less than 0.55 Kg/RM including necessary joining cleats, glazing clips, rubber neoprene packing, brass handle and brass tower bolts of size 150mmx 02 Nos in each door, hinges, anodised aluminium snap beading screws, hydraulically regulated double action floor spring made up of 1.25 mm thick aluminium alloy sheet, foundation box for each shutter etc and including fitted with 5 mm thick tinned glass in glazed shutter with brass mortice lock of 100mm , 2 levers, vertical type, complete, all as specified in clause 10.37 of SSR Part I & directed by Engr-in-Charge.

S&F aluminium window/ventilator shutter with frame, sliding/side hung type with sash bars including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc and including each window fitted with 5mm thick tinned glass in glazed shutter, duco pattern aluminium anodised grill (weight not less than 2.625 Kg/Sqm) and stainless wire cloth 0.36 mm nominal dia and average width of aperture 1.40 mm in gauzed shutter etc, complete, all as specified and directed.

S&F sink with drainage board made of stainless steel 1.00 mm thick, kitchen with plugs, washers and waste including fixing cantilever brackets and connecting union overall size not less than 1145mm x 510mm, bowl size 560 x 410 x 200mm complete all as specified and directed..

S&F anodised aluminium snap grid frame work of false ceiling with hangers 6mm dia GI upto 1200mm length fixed with fastners complete all as specified and directed.

M&L 12mm thick perfoarted particle board/tiles for insulation and acoustic purposes 60X60CM in size fixed with steples on snap grid complete all as specified and directed..

M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, multi stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box 1.2 mm thick with bakelite laminated sheet top cover 3 mm thick( Make - Hylem/Anchor) ISI Marked, brass screws and cup washers including 1.5 Sqmm multi stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for:- Make of wire- Havells/Polycab/Anchor/Finolex. Make of PVC conduit -AKG/Plaza/Kalinga

One light point/bell point controlled by one, one way switch.

One ceiling fan/exhaust fan point controlled by one, one way switch.

One three pin 5 Amp socket on same board with other switches.

One 3 pin 5 Amp socket on independent board.

All as per item No. 106.00 here-in-before but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 2.5 Sqmm Multi stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth.

S&F Switch piano, flush type, single pole, one way, 5 Amps, 240 volt, 50Hz, AC, complete all as specified and as directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F switch piano flush type 15 Amps, single pole one way 240 volts complete all as speciied and directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F Socket outlet 3 Pin 5/6 Amp flush type complete all as speciied and directed by engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F socket out let 2 in 1, multipurpose 3 pin 15/16 Amp flush type complete all as speciied and directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F ceiling fan regulator electronic flush , steped type (four step) 230 Volts AC complete all as specified and directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F ceiling rose surface bakelite 3 terminals complete all as speciied and directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F LED box type tube light fitting 20 watt made up of CRCA sheet with prewired double sided connections including 1x20 watt retrofit LEd tube rod with extruded aluminium body, PC diffuser and inbuilt driver, double sided connection, complete with all accessories internally prewired. Make: Crompton Cat Part No. LTT8-20 for tube, IGP161LT8-16 for batten or equivalent from Philips/Wipro/Havells.

S&F lamp holder PVC/polycarbonate type with back plate complete all as speciied and directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F of LED lamp 9/11 watt complete all as specified and directed.. MAKE:- Syska SSK-PAG-9 or equivalent from Havells/Bajaj

S&F LED mirror light fitting 10 Watt sleek polycarbonate channel with white acrylic cover complete with all accessories pre-wired and including connecting flexible copper conductor cable with suitable size. Make Bajaj Cat No. BCLSB 10NW or equivalent from Havells/Osram

Supply & fixing, testing and commissioning energy saving street light luminaire 30 watt LED , aluminium pressure die cast housing with apoxy powder coated with colour finish and prismatic poly carbonate acrelic cover with individual LED lence , IP 66 protection complete all as specified and directed by Engr-in-Charge. Make- Havells Cat Part No ENDURAPEARLS 30WLED757SASYTOPCMP, or equivalent model of Surya/C & S.

S&F LED bulk head luminaire 1x10 W bulk, IP 65 protection, complete with all accessories and including connecting up with three core copper conductor cable complete, all as specified and directed by Engr-In-Charge. Make: Bajaj Cat Part No. BIBWP 10W LED or equivalent make of Syska/Crompton/Jaquar.

S&F street light bracket made of 32 mm GI pipe , 1.2 mtr lenght fixed with two nos of clamp , nut and bolts complete all as specified and directed.

S&F ceiling fan of 1200 mm sweep, 230 Volts, AC 50 Hz, copper winded, high speed, BEE star rated as per latest norms with motor, blades (03 Nos), down rod, canopy & shackle assembly including 0.5 sq mm three core PVC insulated flexible wire with mulitstranded copper conductor from ceiling rose to connector of ceiling fan and writing of MES No, complete, all as specified and directed by Engr-in-Charge. Make: Havells ES 50 or equivalent from Crompton/ Usha/Orient as approved by the GE.

S&F recess mounted 2' X2' luminaire with white powder coated CRCA housing with LEDs 36 Watt square shaped complete all as specified and directed. Make :- Bajaj Cat Part No BZRSQL 36 W GZ WH, Jaquar Cat Part No LULT01S36xC or equivalent model of Havells.

S&F ventilating fan 250 mm sweep suitable for 230 Volts, Single phase 50 Hz AC supply, metal body with bird guard including connecting with three core flexibale copper cable. Make Havells Ventil Air-DX white or equivalent from Usha/Crompton/Bajaj

S&Ff MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 8 way, 240 volts suitable for housing MCB's including blanking plate complete all as specified and directed. Make: Legrand/Schneider/Seimens Note: MCB DB and MCB SP/SPN will be of same make.

S & F MCB SPN, 240 volt, 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge by Engr-in-Charge. Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)

S & F of MCB SP, 240 volt, 3 Amp to 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge. . Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore GI med grade with funnel and wire mesh, PCC chamber in cement concrete 1:3:6 type C-2 and RCC 1:2:4 type B1 cover with handle all as specified and shown in elect plate No 3 of SSR Part-I of 2009 incl dismantling of old unsv existing earthing, complete, all as specified & directed.

Supply and, laying, including jointing, testing or fixing or passing through pipe, trench or duct, commissioning and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 Volt grade size 10 Sqmm, 2 core complete all as specified and directed by Engineer-in-Charge. Make Polycab/Asian/Gloster/Finolex

Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top cable including spreading, levelling, watering and consolidation, complete all as specified and directed by Engineer-in-charge. Note: Punned thickness only shall be measured and paid.

Supply and laying of bricks of old class ‘B’ as protection cover to UG cable, laid flat adjoining to each other width wise, complete, all as specified.

Supply and laying GI tubing 40 mm bore, light grade with all fittings, laid in trenches/under floor or fixed on pole/on wall for cable protection.

Supply and installation of evaporative desert cooler electric driven suitablefor single phase, 230 volts, AC 50 Hz supply having minimum air flow capacity 4000 Cum per hour, complete with fan, motor and pump (or nearest size) steel body etc. Make of motor & Pump: Khaitan.

M&L for 40x40x6mm equal angle iron stand, removable, design as approved by Engr-In-Charge including cutting and welding etc for desert coolers, dully painted with two coat coat of aluminium paint over a coat of red oxide primer, all as directed.