REPAIR TO BOUNDARY WALL, VIEW CUTTER, FENCING AND PROTECTIVE WALL AT ZONE A UNDER GE 864 EWS JOB NO- TPP 2024-25

Amount

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified.

Taking down PVC pipes including all fittings like shoes, bends, swan necks etc of any dia all as specified and directed.

M & L brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1 : 6 in all as specified.

M & L for walling of random , uncouresed well bonded, bedded and solidly hearted built in CM 1:6 all as specified.

-Ditto- all as per item No 4 but except stone.

Extra over stone walling for hammer dressing with maximum depression n exc.20mm on face from straight edge held against the dressed surface to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses , Granite or Trap stone, all as specified

S&F 110 mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors all as specified.

M & L providing precast cement concrete 1 : 2 : 4 Type B1 ( 20 mm graded aggregate) set in cement mortar 1:6 in window or door cills, lintels, steps coping, bond stone, kneelers, pier caps, columns, post etc. and setting in mortar complete with joints to match all as specified. Note:- Qty of bond stone will be deducted for stone masonery.

M & L PCC 1 : 2 : 4 Type B1 ( 20 mm graded aggregate) as in providing, cement concrete cills, steps, parapets and railings upto 60cm in height, coping kerbs, fencing posts, benching for manholes haunching corbelling and channel etc with slightly chamfered or rounded angles including necessary form work and finished even and smooth without using extra cement complete all as specified and directed.

Excavation over areas not exc 1.5 m deep and getting out in hard/ dense soil complete all as specified and as directed.

Excavation over areas exc 1.5 m width and n exc 3.0 m in depth and getting out in soft/loose soil all as specified.

Removing excavated material to a distance exc 50 mtr but n.exc 250 mtr but and depositing where directed at a level n exc 1.5 mtr above starting point all as specified.

M&L for broken stone boulder filling dry, and packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level all as specified.

M & L raised pointing to random or polygonal rubble, uncrushed or brought upto course in CM 1:3 all as specified and directed.

M&L rendering plaster 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and fair all as specified.

M&L preparing newly plastered surfaces of walls and applying two coats of cement base paint all as specified.

Dismantling plain or corrugated steel sheeting, any gauging, thickness, in roof covering all as specified.

Dismantling trellis work (Jafri) two way including taking as under of battens in trellis (posts and rails measured separately), all as specified.

Dismantling timber scantling 40 sq cm & over in section , any position in unframed work all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified.

S & F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc, all as specified.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F 2nd class hard wood clean sawn timber fixed in scantling complete all as specified and directed

S&F for hardwood 2nd class wrought 40 mm x l2mm laths (fixed straight or diagonally) in two way trellis work with 75mm spaces in the clear, including 75mm x 50 mm fillet (notched to take ends of laths) all round and fixed complete all as specified.

M&L preparation of new painted wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, all as specified.

Dismantling of old GI barbed wire fencing of any description from RCC post complete all as specified and direction. (Note : Each line of wire to be measured)

Dismantling chain ink fencing any type and any position all as specified.

Dismantling RCC post or struts any section including taking out embeded portion in concrete and makind good disturbed ground complete all as specified and direction.

Dismantling RCC post or struts any section including taking out embeded portion in natural ground and makind good disturbed ground complete all as specified and direction.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided all as specified.

M & L PCC 1 : 3 : 6 Type D2 ( 40 mm graded aggregsate) as in foundation and mass concrete all as specified.

S & F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia all as specified.

-Ditto-, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L Precast reinforced cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in precast posts,straining or terminal posts , struts etc for fencing posts average sectional area exceeding n exc 100 sq cm with or without chamfered angles and flat splayed rounded or mitred tops and fixed in position all as specified and as directed.

M&L Precast reinforced cement concrete type B-1, 1:2:4 (20mm graded aggregate)as in fencing posts average sectional area exceeding 100 sq cm & not exceeding 250 sq cm with or without chamfered angles and flat splayed rounded or mitred tops and fixed in position all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards including provission of binding wire

Supplied only chain link MS galvanised fencing any size or type all as specified.

S & F Mild steel work as a wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, all as specified.

S&F MS screw bolts (Machine made) 12mm dia neck and length exceeding 15cm & not exceeding 22.5cm long hexagonal or square head at one end and screwed other end to be fixed with one washer and one hexagonal nut, the other end to be embedded in RCC fencing post while casting, completed all as specified and directed.

S & F round steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia all as specified.

S & F deformed steel bars 6 to 8 mm dia and , cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia all as specified.

S & F galvanized 2 brand sheet barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straning and fixing to any type of standard rails strasing bolts all as specified.

S & F mild steel work in framed work as in doors or gates of angle or other sections, prepared for hanging with and including either hooks and hinges, and hanging also fastening and fixing complete conforming to Gde Fe 410 -W (Gde- E- 250) quality- A all as specified.

Preparing newly plastered surfaces of walls and applying three coats of white wash all as specified.

M & L preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer over newly prepared steel surface all as specified.

M&L preparing new steel surface n exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.

M/S Himalayan Construction and Co. (BID ID -3182724)

M/S NORTHERN ELECTRICAL WORKS (BID ID -3177302)

M/S BASHIR AHMAD MIR (BID ID -3174681)

M/S Sky Engineers (BID ID -3176660)

M/S VALLEY ENTERPRISES (BID ID -3182537)

Alishan Builders (BID ID -3182766)

M/S MAHIR MUNEER (BID ID -3172582)

AHMED CONSTRUCTIONS AND INFRA PVT LTD (BID ID -3182669)

M/S TAJ DIN KHARI (BID ID -3175499)