REPAIRS TO COMPOUND WALL, BARBED WIRE, CHAIN LINK FENCING AND SECURITY GATE, WOODEN AND ALUMINIUM JOINERY, ROLLING SHUTTERS, PLINTH PROTECTION, CHAJJAS, FLOORING, CLEANING OF WATER TANKS AND STORM WATER DRAIN AT IAM AND VV CAMP UNDER GE(AF) MARATHAHA

Amount

Dismantling of barbed wire fencing, any type etc complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete etc all as specified and as directed.

Demolition of Brick work or Stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings dressed stonework and precast concrete articles Complete all as specified and as directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation etc for shafts, wells, manholes, columns, pier holes etc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in Hard / Dense soil all as specified and directed.

Excavation in trenches in hard/dense soil not exceeding 1.5 metre wide and depth exceeding 1.5 m depth but not exceeding 3 metre deep for laying of cables etc, getting out and forming bottom surface to required gradient complete all as specified and directed.

Material and labour Plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate as in foundations of filling and mass concrete all as specified and directed.

Material and Labour for Reinforced cement concrete 1:2:4 Type B1 (nominal mix) using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed by Engr-in-charge.

Material and Labour for Reinforced cement concrete 1:2:4 Type B1 (nominal mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed by Engr-in-charge.

Material and Labour for Reinforced cement concrete (1:2:4) Type B1 (nominal mix) (using 20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span Complete all as specified and as directed.

Material and Labour for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with fair finished surfaces of concrete complete all as specified.

Material and Labour for form work to sides and soffits of floor or roof beams, lintel etc, flat, rough finished surface of concrete all as specified and directed.

Material and Labour for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified Complete all as specified and as directed.

Material and Labour for Mild steel TMT bars 5 & over upto, & including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required including cranking, bending spirally for hooping ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips Complete all as specified and as directed.

Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and Labour for Providing cast in site Cement concrete Type B1 1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs Complete all as specified and as directed.

Material and Labour for miid steel work for posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc including all necessary drilling, bolting or reveting etc and similar work conforming to Fe 290 Gde-E-165 Complete all as specified and as directed.

Supplying and fixing Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Material and labour for preparation of new steel surfaces or previously untreated surfaces, not otherwise described, exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified.

Material and Labour for preperation of old painted steel & iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint Complete all as specified and as directed.

Material and Labour Pre-Cast Cement Concrete block masonry with solid blocks, in PCC 1:3:6, type C1, using 20mm graded stone aggregate exc. 10 cm in width and setting in CM (1:6), complete all as specified and as directed by Engr-in-charge.

Material & Labour for Walling of squared rubble, Bangalore type, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 including dressing face bed complete all as specified.

All as per Item No.37 above but except stones.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling uncourses hammer dressing with maximum deprssion on face from straight edge held against the dressed surface n.exc 40mm all as specified and directed.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, etc. including raking out joints, hacking for key, scrubbing down with water, etc Complete and removing the rubbish off the premises to a distance n.exc.50m Complete all as specified and directed.

Material and labour for Rendering 15 mm thick on fair faces if brick work or concrete surfaces in CM (1:4) finished even and fair without using extra cement mixed with Water proofing compound complete all as specified and as directed by Engr-in-charge. (Note: Water proofing compound will be measured and paid for separately).

Supply Only liquid Water proofing Compound all as specified and directed.

Material and Labour for preparation of newly plastered surfaces of walls and applying two coats cement base paint over a coat of alkali resistant primer Complete all as specified and directed by Engr-in-Charge.

Material and Labour for preparation of Old decorated surfaces of Walls including brooming down or steel wire brushing, scrapping down smoke, soot, module, moss and efflorescence salt, oil and greasy spots etc and applying One coat of cement base paint Complete all as specified and directed.

Material and Labour for preparation of newly plastered surfaces of walls and applying two coat of Synthetic enamal paint over a coat of primer Complete all as specified and directed.

Returning, filling in including spreading, levelling watering and well ramming in layers not exceeding 25cm thick in hard / dense soil complete all as directed by Engr-in-charge.

Removing excavated soil to a distance n.exc 5 Km and and depositing where directed at level not exceeding 1.50m above the starting point complete all as directed by Engr-in-charge.

Dismantling of Structural steel works inclding doors gates but exc framed trusses etc all as specified and as directed.

Material and Labour for Framed work for hang gates with ends of bar shoulder and / or riveted or forged into spikes, framed guard bars including pintle hinges stops hand made sliding bolts etc. similar work conforming to Fe 290 Gde E-165 all as specified.

Supply and Fixing for 1.25 mm thick mild steel plain black sheet in wall cladding steel gates and similar work, cut to size, holes punched, including rounded headed screws, clout nails or revets & fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up mitred angles, etc as required.

Supply and Fixing for zinc coated concertina coil of thickness 2.50 mm of core wire and 0.5 mm thick cold rolled carbon strip (dia approx 610 mm that covering 6 mtr length and 50 spirals) having weight not less than 8.00 Kg per coil all as directed.

Supply only Chain link MS galvanised fencing any size or type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, welding work required etc. including provision of winding wire Complete all as specified and directed.

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing rubbish outside MD land all as directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation etc for shafts, wells, manholes, columns, pier holes etc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in Hard / Dense soil all as specified and directed.

Material and labour Plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in surface channels for drains all as specified and directed.

Material and Labour broken stone or boulders Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface all as specified and directed.

Material and Labour Pre-Cast Cement Concrete block masonry with solid blocks, in PCC 1:2:4, type B1, using 20mm graded stone aggregate exc. 10 cm in width and setting in CM (1:6), complete all as specified and as directed by Engr-in-charge.

Material and Labour for 50 mm thick Plain Cement Concrete (1:2:4), type B0 (using 12.5mm graded stone aggregate) as in drains finished cement concrete surface even and smooth using extra cement complete all as specified and directed.

Material and Labour for Extra for forming fair finished drain or channel of manholes 50 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified and directed by Engr-in-charge.

Material and Labour for Plain Cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in copping complete all as specified and as directed by Engr-in-charge.

Material and Labour for Cutting opening through Stone walls built in cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective stone work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking stone, removing surplus serviceable Stone, hard-core, etc. to store and rubbish not exc. 50m Complete all as specified and as directed.

Material and Labour for Steel work in tubular trusses including special shaped washers etc. Complete using ERW or induction butt welded tubes Conforming to IS 1161 - 1998 grade St.-240 Complete all as specified and as directed by Engr-in-Charge.

Material and Labour for rolled Mild Steel joist, channel, angle or tee sections, fixed independently, without connection plate etc. (cut to ordinary lenghts i.e within 20mm of the length indicated. Conforming to Fe - 410W, Grade E- 250 Quality A Complete all as specified and as directed by Engr-in-Charge.

Material and Labour for Framed work such as grills, gratings, etc., with ends of bar shouldered and or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks & similar work conforming to Fe 290 Gde E-165 all as specified.

Material and Labour for Pre cast cement concrete 1:3:6, type C1, (20mm graded aggregate) as in cover slab for man holes and set in Cement Mortar 1:4 including finished top surfaces cover even & fair complete all as specified and directed by Engr-in-charge.

Material and Labour for Mild steel TMT bars 6 to 8 mm dia cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-charge.

Material and Labour for roughening surfaces of old concrete floors by picking, sweeping clean and washing down with water to remove dust, etc. and applying Brushing neat cement slurry with 3.0 Kg of Cement per Sq. metre Complete all as specified and as directed by Engr-in-charge.

Material and Labour for 100 mm thick Plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate as in subbase for floors complete all as specified and directed.

Material and Labour for Plain Cement concrete 1:2:4, type B-2 (using 40mm graded aggregate) 100mm thick in floors finished cement concrete surface even and smooth using extra cement and making impressions of Expanded metal, whilst the concrete is green all as specified and directed.

Material and Labour for 25 mm thick Plain Cement Concrete (1:2:4), type B0 (using 12.5mm graded stone aggregate) as in floors finished cement concrete surface even and smooth using extra cement complete all as specified and directed.

Material and Labour Pre-Cast Cement Concrete block masonry with solid blocks, in PCC 1:3:6, type B1, using 20mm graded stone aggregate exc. 10 cm in width and setting in CM (1:6), complete all as specified and as directed by Engr-in-charge.

Material and Labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in CM (1:6) finished even and fair without using extra cement complete all as specified and as directed by Engr-in-charge.

Material and Labour for Rendering 15mm thick on fair faces of Brick work or concrete surfaces of walls in CM (1:4) finished even and fair without using extra cement complete all as specified and as directed by Engr-in-Charge.

Material and Labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer all as specified and directed.

Material and Labour for Preparation of newly plastered surfaces of walls and applying two coats of Cement based paint over a coat of alkali resistant primer all as specified and directed.

Cleaning and removing all scale, dirt etc from tanks and from mouths of circulating pipes etc of Over head water tank exceeding 250 ltrs and not exceeding 500 ltrs capacity including washing with washing powder or suitable cleaning agent / soap / detergent etc and finally writing the date of cleaning on the side of the tank with synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Cleaning and removing all scale, dirt etc from tanks and from mouths of circulating pipes etc of Over head water tank exceeding 500 ltrs and not exceeding 1000 ltrs capacity including washing with washing powder or suitable cleaning agent / soap / detergent etc and finally writing the date of cleaning on the side of the tank with synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repairs PVC tank covers suitable for existing rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) complete all as directed by Engr-in-Charge.

Supply and fixing in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm - 210gms/25mm-455gms/40mm-690gms) all as specified and as directed.

Supply and fixing in repairs Gun metal gate valve with iron wheel head ISI marked screwed both ends complete for 20 mm dia iron pipes complete all as specified and as directed by Engr-in-Charge.

Material and Labour for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate for Plinth protection complete all as specified and directed.

Material and labour for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A', Complete all as specified and directed.

Taking down Chowkats with shutters of any description (with out taking off shutters from the frames) not exc 1.5 Sqm each Complete all as specified and directed.

Taking down Chowkats or frames with shutters( with out taking off shutters from the frames) exceeding 1.5 Sqm but not exc 4 sqm each Complete all as directed.

Taking down Shutters of any description n exc 1 sq. m each Complete all as specified and directed.

Taking down Shutters of any description exceeding 1 Sqm but not exc. 2 Sqm each Complete all as specified and directed.

Material and Labour for Second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints for door and window chowkhats and other frames all as specified and directed.

Supply and Fixing Prelaminated Particle board 18mm thick exterior grade, prelaminated both sides with decorative choice lamination fixed with screws to timber frame work Complete all as specified and directed.

Supply and Fixing 35mm thick Factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and Fixing IInd Class Hard wood, 30mm thick, Factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkats complete all as specified and directed.

Supply and Fixing IInd Class Hard wood, 30mm thick, Factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(b); supplied and fitted to chowkats complete all as specified and directed.

Supply and Fixing IInd Class Hard wood Plain fillets, exc. 3 Sq.cm and n.exc. 6 Sq.cm, square, rectangular or triangular in section, clean sawn, secured and fixed with screws Complete all as specified and directed.

Supply and Fixing of Solid PVC door frame of size 50mm x 47mm made out of 5mm thick single side prelaminated PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with the prelaminated sheet reinforced with MS square tube all as specified and as directed.

Supply and Fixing Factory made Solid Panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site all specified and as directed.

Supply and Fixing Butt hinges, medium weight cold rolled mild steel, 125mm size Complete all as specified.

Supply and Fixing Butt hinges, extruded anodised aluminium alloy with galvanised mild steel hinge pin 75mm size type B-21 Complete all as specified.

Supply and Fixing 100 mm long Aluminium anodised, barrel tower bolts matt finished of extruded section all as specified.

Supply and Fixing 150 mm long Aluminium anodised, barrel tower bolts matt finished of extruded section all as specified.

Supply and Fixing aluminium anodised alloy handles, cast type, of size 100mm complete all as specified.

Supply and Fixing aluminium anodised alloy handles, cast type, of size 150mm complete all as specified.

Supply and Fixing 250 mm long Aluminium alloy, anodised, sliding door bolts with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed Complete all as specified and directed.

Supply and Fixing 150 mm (overall length of cover plate) Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed all as specified and directed.

Supply and Fixing Continuous (piano) hinges, brass, bright finish or electrogalvanised of Width of flaps (when open) in 40mm complete all as specified.

Supply and Fixing Mild steel helical spring, 375 mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and Fixing in repairs door closer hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (Die cast body), complete all as specified and as directed by Engr-in-charge.

Supply and Fixing Steel windows with double leaf ( Glazed / gauzed ), made out of box section of size 60 x 40 mm, 1.25 mm thick, side hung shutters including box type hinges with steel handle, and steel peg stay, tower bolts, guard bars, etc., Complete with glazing bars and locking arrangements welded to shutters including necessary beading with MS flats for securing wire gauze etc., complete all as specified and as directed

Material and Labour for Welding in repairs not exc 2.5 cm in length, thickness of Metal to be welded not exc. 6 mm complete all as specified and as directed.

Material and Labour for Welding in repairs not exc 2.5 cm in length, thickness of Metal to be welded exc. 9 mm but not exc. 20 mm complete all as specified and as directed.

Supplying and Fixing 4.8 mm thick sheet glass ordinary quality and glazing with oil putty fixed with PVC / neoprene gasket, angular glazing aluminium beads, rubber packing, locking arragements for sliding windows in square n.exc. 0.5 Sqm in each pane including hacking out old broken glass from metal frames Complete all as specified and as directed.

Supply and Fixing 4mm thick sheet glass, superior quality and glazing with oil putty in squares n.exc.0.5 sqm in each pane including punching or drilling out old glazing pins / spring clips fixed to aluminium frame works with rubber beadings etc including hacking out old broken glass from metal frames Complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 4.0 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane including hacking out old broken glass of any thickness, size quality or description from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads etc Complete all as specified and as directed by Engr-in-charge.

Supply and Fixing Stainless steel steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm, fixed with tinned tacks, or galvanised wire staples all as specified and directed.

Material and Labour for Cutting holes of superficial area n.exc. 150 Sq. cm into or through brick walls built in brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed.

Material and Labour for Plain Cement concrete 1:3:6, type C1, using 20mm graded stone aggregate as in bed blocks for fixing of hold fasts and finishing the exposed concrete surfaces of concrete even and fair complete all as specified and as directed by Engr-in-charge.

Material and Labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of aluminium paint complete all as specified and as directed by the Engr-in-charge.

Material and Labour for preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Material and Labour for Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., Complete, as specified, supplied and fixed

Material and Labour for Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., Complete, as specified, supplied and fixed

PRANAVI CONSTRUCTION