SPECIAL REPAIR OF BLDG NO T-37 FRESH GROUP UNDER GE (C) KOLKATA

Amount

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and and rubbish off the premises complete all as directed.

Dismantling of plain or corrugated sheet any gauge thickness, including nainital or similar pattern roof covering complete all as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as directed

Taking down chowkhat or frames with shutters (without taking of shutters from the frame) of any description, area exceeding 1.5 Sqm and not exceeding 4.00 Sqm each all as directed.

Taking down shutters of any description, area exceeding 1.00 Sqm and not exceeding 2.00 Sqm each all as directed.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removal or rubbish from the premises complete all as specified and directed

Taking up or down 15 mm bore steel tubing of any grade and connection including cleaning for refixing or removal to store or from site all as directed.

Taking up or down 20 mm bore steel tubing of any grade and connection including cleaning for refixing or removal to store or from site all as directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlars facing,dressed stone work and precast concrete articles complete all as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick laid over 15mm thick screed bed or bedding layer in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including polishing rubbing the floor etc complete all as directed by Engineer-in-Charge.

M&L for Kota stone slab 20-25mm thick laid over 10mm thick backing layer in CM 1:3 in riser of steps, skirting, dado and pillar set and jointed with grey cement slurry mixed with pigments to match the shade including rubbing and polishing complete all as specified & directed.

S&F of glazed ceramic colour/digital tiles 450m x 300mm x 7-8mm thick on vertical surface such as skirting, dado, set and joint in neat cement slurry and pointed in white/coloured cement to match with existing surface including 10mm thick backing layer in CM 1:4 Complete all as specified & directed.

M&L for coloured/digital ceramic floor tiles 7-8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n. exc. 0.18 sqm (400mm x 400mm x 7-8mm) as in floor etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor make including 15 mm thick screed bed or bedding layers in CM 1:6 Complete all as specified & directed.

M&L for light shade vitrified ceramic floor tiles10 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n. exc. 0.36 sqm (600mm x 600mm x 10mm) as in floor etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor make incl 15 mm thick screed bed or bedding layers in CM 1:6 Complete all as specified & directed.

All as per item No 15 here-in-before but on vertical surfaces incl 10mm thick backing layer in CM 1:3 Complete all as specified & directed.

M&L for Pre polished Chequered cement concrete tiles of size 300mm x300mm x25mm thick set, jointed in neat cement slurry and pointed with grey cement and no pigment including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed including taking out old unserviceable chequerred tiles.

M&L for 60mm thick machine pressed precast concrete interlocking paver block M-35 grade conforming to IS:15658 - 2006, any shape and size laid over 100mm sand cushioning complete all as specified and directed. Make:- Anjali Tiles / Ultra Tiles Pvt Ltd / Mehtab Tiles

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub floor, sub bases, floors and paving etc complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 Type D-2 (using 40 mm graded crushed stone aggregate) as in sub floor, sub bases, floors and paving etc complete all as specified and directed.

M&L for 8mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long, self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish' including anodized aluminium snap grid frame work for false ceiling & hangers of 6 mm dia G.I (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40X3 mm size 60 mm long and expansion hold fasterners 12.50 mm dia 40 mm long complete all as specified & directed.(All framework shall be done as per SSR Part-1) as in repair.

S&F of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F of 0.80 mm thick plain, galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings(length and girth as fixed) with grade of zinc coating 120 complete all as specified & directed

S&F of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified & directed.

All as per item No 22 here-in-before but except sheeting Note:- Old serviceable galvalume sheets shall be obtained from sl item No 03

M&L for 2nd class hard wood timber scantling, framed work, wrought complete all as specified & Directed.

All as per item No 26 here-in-before but except timber complete all as specified & Directed. Note:- Old serviceable timber scantling shall be obtained from Sl item No 04

S&F of 2nd Class Hardwood Plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as complete specified and as directed.

S&F of 35mm thick 2nd class hard wood Glazed and skeleton shutters (factory made), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed by the Engr-in-Charge.

S&F of 30mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete as specified and as directed.

S&F factory made 35mm thick with 2nd class hard wood, rail and style factory made plain framed panelled shutter(two panel) with lock, rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS:1003(Part-I) kiln seasoned and chemically pressure treated complete as specified and as directed..

S&F of PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube and fixed as per instruction of manufacturer complete all as specified and directed.

S&F of factory made solid PVC moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face and fixed as per instruction of manufacturer complete all as specified and directed.

M&L for 2nd class HW plain fillets square, rectangular in section, wrought, fixed with nails sectional area exc 6 sqcm and n. exc. 13 sqcm complete all as specified & directed, as in repair.

M&L for 2nd class HW plain fillets square, rectangular in section, wrought, fixed with nails sectional area exc 13 sq cm and n. exc. 25 sqcm complete all as specified & directed, as in repair .

S&F of 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified & directed, as in repair.

S&F of aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and directed.

S&F of aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and directed.

S&F of aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and directed, as in repair.

S&F of 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast al alloy all as complete all as specified and as directed.

S&F 300mm long sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bots and sliding bolts of extruded or cast aluminium alloy complete all as specified and directed, as in repair.

S&F of butt hinges, medium weight, cold rolled mild steel 100 mm long complete all as specified and directed.

S&F of butt hinges, medium weight, cold rolled mild steel 75 mm long complete all as specified and directed.

S&F of butt hinges, medium weight, cold rolled mild steel 100 mm long complete all as specified and directed as in repair.

S&F of aluminium handles 100 mm long cast type, anodised complete all as specified and directed.

S&F of aluminium handles 150 mm long cast type, anodised complete all as specified and directed.

S&F of aluminium handles 100 mm long cast type, anodised complete all as specified and directed, as in repair.

S&F of Aluminium (extruded section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as spcified and directed, as in repair.

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and directed.

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and directed as in repair.

M&L for mild steel flat iron as in hold fast conforming to Fe-410 or Fe 310 complete all as specified and as directed by Engineer-in-charge.

M&L for 15 mm thick rendering in CM (1:6) on fair face of brick or concrete surfaces, finishing even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick cement plaster in CM (1:4) on concrete surfaces as in ceiling / chajja, finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 20 mm thick cement plaster in two layer ( 10+10 mm thick) on fair face of brick work or concrete surface on external surfaces in CM (1:4) & water proofing compound mixed with second layer (top layer) @ 2% by weight of cement or as per manufaturer instruction finished fair and even. complete all as specified and directed. Note -W.P.C. shall be measured and paid separetly as supply only.

Supply only integral water proofing compound (ISI marked) all as directed.

M&L for preparation of new plastered surfaces and applying two coats of cement based paint over a coat of primer on brick or concrete wall surfces complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistance primer incl 1.5mm thick putty complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered or unplastered surface of ceiling and applying two coats of white wash complete all as specified and as directed by Engineer-in-charge.

S&F of Aluminium ventilater with powder coated anodized aluminium frame of section size 65.5 x 38.10 x 1.5 mm and Shutter with section 47.62mm x 44.5mm x 1.5mm thick half portion fixed with glass and half portion louvered including powder coated aluminium anodised “D” handle, hinges, peg stays, tower bolt etc including jointing cleats for fixing Builder hardware complete all as specified & directed.

S&F of 5.5mm thick tinted glass, ordinary quality and glazing with aluminium/wooden beading in square exceeding 0.5 sqm in each pane fixed complete all as specified and as directed

S&F of 4.00mm thick tinted glass, ordinary quality and glazing with aluminium/wooden beading in square n. exceeding 0.5 sqm in each pane fixed complete all as specified and as directed

M&L for applying two coats of synthetic enamel paint over a coat of pink primer area exc.10cm width or girth over new wooden surfaces including preparation of surface complete all as specified and as directed by Engineer-in-Charge.

M&L for applying one coat of cement based paint on walls surfaces complete all as specified and directed.

S&F of Aluminium door with powder coated standard aluminium sections of medium size and weight not less than 1.50 kg/Rm and confirming to catalogue of jindal or equivalent. The door shall be of side hung type fixed at bottom with standard door spring, pintals etc. The bottom panel of the door shall be fitted with 12 mm thick prelaminated particle board decorated on both sides of approved colour and 5.5 mm thick tinted glass in top panel complete incl all necessary fitting such as 02 nos handles of approved size and shape, 02 Nos aluminium anodised tower bolts, 200 mm long and 01 No mortice lock per shutter. The shutter frame shall be with one or more rebates including jointing cleats, glazing clips, standard rubber beading complete all as specified and directed, as in repair.

S&F of Powder coated anodised aluminium sliding fly proofing window, three tier (two shutter of glass and one shutter on wire mesh) without glazing bar, window shutter style shall be 40mm X 19mm, sheet thickness 1.5mm ,sliding channel 3mm thick channel width shall be as required and directed by Engr-in-Charge with roller. Frame (Chowkats) of window shall be 75mm X 60mm X 1.5mm thick section with or without rebate with 5.5mm thick tinted glass and galvanised wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm aluminum glazing clips fixed with rubber gasket locking arrangement all as directed by Engr-in-Charge, as in repair.

Cutting chases for water tubing, pinning in making good to facing where required in CM (1:3) to brick wall cutting girth not exceeding 10cm girth complete all as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in bed blocks for fixing hold fast complete all as specified and directed.

S&F of 15mm dia tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F of 20mm dia tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing 15mm dia bore GI old steel tubing and connection in new or old position (wall, ceiling, floor etc) complete all as directed. Note:- Serviceable GI tube including fittings shall be obtained from Sl Item No 08

Refixing 20mm dia bore GI old steel tubing and connection in new or old position (wall, ceiling, floor etc) complete all as directed. Note:- Serviceable GI tube including fittings shall be obtained from Sl Item No 09

S&F & hoisting in position Rotational moulded polyethylene water storage tank, 2000 litres capacity, ISI marked multi layer construction (cylindrical vertical with closed top), hoisted & fixed in position including dismantling of old unserviceable tank including 20mm ball valves (Minimum weight 210gms) complete all as specified and as directed.

S&F of 110 mm dia PVC (SWR) rain water pipe fixed on walls, ceilings and floors incl GI/PVC clamps, bend sockets etc including taking down old unserviceable PVC pipe complete all as directed.

S&F of 19/20 mm pre-laminated particle board as in cup baord shutter double leaf one side decorative of sheds and other side balancing white lamination. All edges properly sealed with 5 mm thick 2nd class hard wood beading fixed with water resistant adhesive except rebate side which shall be 25mm thick complete all as specifeid & directed, as in repair.

All as per item No 75 here-in-before but 6mm thick plywood BWP type BB complete all as specifeid.

M&L for 20 mm thick machine cut one side polished natural hard stone (Granite)any type in step, jambs, pillars,window cills, cooking plate from and simalar places etc like in 15mm thick screed bed or bedding layer in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including necessary moulding / chamfering complete all as specified and directed, as in repair.

S&F of stainless steel piano hinges fixed with screw on cupboard/door/window etc complete all as directed, as in repair.

S&F of Magnet catcher for cupboards complete all as specified and directed, as in repair.

S&F of drawer board knobs 20 mm dia of brass polished fixed with nut screw & washer etc complete all as specifeid & directed, as in repair.

M&L for brick work with modular burnt fly ash bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed.

All as per item No 81 here-in-before but except bricks

M&L for brick work with modular burnt fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM(1:4) complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coat of white wash (any colour/tint) on wall surfaces complete all as specified & directed.

M&L for preparation of old plastered surfaces and applying one coat of white wash (any colour/tint) on ceiling surfaces complete all as specified & directed.

M&L for complete removal of existing finishes and treating with two coats of oil bound distemper (any colour/tint) over a coat of alkali resistent primer over 3mm thick wall care putty including rubbing with emmery paper to make wall surfaces smooth & even complete all as specified & directed.

M&L for preparation of old plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm complete all as specified & directed.

M&L for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description over 10 cm width or girth complete all as specified and directed.

All as per item No 88 here-in-before but on steel surfaces complete all as specified and directed.

S&F of vitreous china wash hand basin, white size 550 x 450mm flat back excluding taps waste chain and plug and porcelain stopper but incl bracket cutting for pinning in ends of brackets of erecting stand but exclusive of fixing of supply and waste pipe all as specified & directed, as in repair.

S&F of 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed, as in repair.

S&F of 15 mm Dia CP angular cock, with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed, as in repair.

S&F of vitreous china white colour wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed as in repair.

S&F of health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified, as in repair.

S&F of 100mm dia CP grating fixed with white cement complete all as directed, as in repair.

S&F of 32mm bore PVC waste pipe flexible type including all cups and sockets with minimum length 800mm for any type/make/size for wash hand basin / Kitchen Sink complete all as specified and directed in repair.

S&F of Plastic seat cover white for EWC with flat bottom incl hinging device complete all as specified & directed, as in repair.

S&F of Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified & directed, as in repair.

S&F of PVC connection 600 mm long fixed to 15 mm GI pipe complete all as specified and directed, as in repair .

S&F of CP connector for hot water supply of size 450 fixed to 15 mm GI pipe complete all as directed, as in repair .

S&F of chromium plated toilet paper holder to wall with chromium plated brass screws complete all as specified and as directed as in repair.

S&F of glass shelf of single set with chromium plated brackets and CP railing including necessary fittings and fixture complete all as specified & directed, as in repair.

S&F of towel rail of brass chromium plated tube 20 mm dia 600 mm long `D' type complete fixed in repairs with brass chromium plated screw complete all as specified and directed as in repair.

S&F Chromium plated Soap dish, fixed to plugs with chromium plated brass screws complete all as specified & directed

S&F of 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and as directed, as in repair.

S&F acrylic bathroom cabinet box with mirror of size 18" X 15" size complete all as specified and directed, as in repair.

S&F of 15mm bore bib cock, cast copper alloy, fancy type with chromium plated crutch or butterfly handle complete all as specified and as directed as in repair.

M&L for Rolled mild steel section as in main POST and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed

M&L for Synthetic enamel paint, two coats over a coat of red oxide primer on new steel or iron surfaces over 10 Cm width or girth including necessary preparation of surfaces complete all as specified and as directed.

S&F of mild steel in framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed by Engineer-in-Charge.

Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc all as specified and directed by Engineer-in-Charge.

M&L for point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm FRLH/S in and including concealed PVC conduit 20 mm dia medium duty ISI marked with all necessary fittings with sunken cast iron /pressed steel terminal box ,flush to surface of 1.6mm wall thickness and 3 mm thick laminated sheet top cover for mounting switches including 1.5 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly for one light / ceiling fan/exhaust fan controlled by one switch complete including cutting, chasing the surface and then making good the same in CM 1:3 complete all as specified and directed by Engineer- in-charge.

All as per item No.113 here-in-before but one 3pin switch socket outlet 5A on independent board complete all as specified and directed by Engineer- in-charge.

All as per item No113 here-in-before but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by Engineer- in-charge.

All as per item No. 113 here-in-before but using 2.5 sq mm size stranded copper conductor cable for one 16 amp switch socket outlet on independent board complete all as specified and directed by Engineer- in-charge.

M&L for switch socket combination 2 in 1 3pin switch socket outlet 5A

S&F of switch socket combination multi - purpose 3 pin, 15 amp and , 5 amp controlled by one switch flush type

S&F of socket out let 2 in 1 ,3 pin 5 Amps on the same board with other switch

S&F of switch piano flush type, single pole one way, 5 Amp complete.

S & F of ceiling rose, PVC / Polycarbonate, 65 x 50 mm, three terminals complete all as specified and directed.

S&F of ceiling fan regulator electronic Step type, solid state, 240 volts, complete all as specified and as directed.

Taking down serviceable LED fitting in safe custody and refixing in the work and making good the disturbed surfaces of walls etc. complete all as specified and as directed.

S&F of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC). Make:Usha/Cropmton/Havells

S&F of exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers. Make:Usha/Cropmton/Havells

S&F of A C starter unit consisting of one 25 Amp capacity starter, one 240 V 25 Amps 10 KA SPN MCB, one 25 Amps socket and one 25 Amps plug top prewired of complete as specified after taking out old unserviceable starter unit all as directed. Make : North West / Anchor / Legrand

Taking down unserviceable DB of any type along with MCBs any type and keeping serviceable MCBs in safe custody for re-use in the work and making good to the disturbed surfaces of walls etc. complete all as specified and as directed.

S & F of sheet metal enclosure double door for DB'S where MCBs to be used 8 way single pole neutral with 200 amps rated bus bar complete all as specified and as directed. Make- ABB/L & T/ Legrand

S & F of sheet metal enclosure double door for DB'S where MCBs to be used 4 way single pole neutral with 200 amps rated bus bar complete all as specified and as directed. Make- ABB/L & T/ Legrand

M&L for MCB DP 63 amps, 240 volts including taking down old unserviceable one.

M&L for MCB SP 6 to 32 amps, 240 volts including taking down old unserviceable one.

Materials and labor for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strip 32 x 6 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, using galvanised iron strip 32×6mm as earthing leadconected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed .

S&F of LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. Make: Philips/Bajaj/Crompton

S&F of LED luminaire 2ftx2ft 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roofceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including taking down old unserviceable one. Make: Philips cat no. R380B-LED36S-6500-G5-L60W60PSU-OD or equivalent product of Bajaj/Havells

S&F of suspended LED batten 4 feets with 1x40W indoor decorative luminaries with and including electronic driver and 1x40W LED lamp including wire suspenders ceiling coupler, including taking down old unserviceable fittings. Make: Magik Cat No. ZCLI040N or equivalent product of Philips/Bajaj/Havells

S&F of recess LED batten 4x1ft feets with 1x36 W indoor decorative luminaries with and including electronic driver and 1x36W LED lamp with housing made of CRCA and white powder coated. Make: Magik Cat No. PCVP036C or equivalent product of Philips/Bajaj/Havells

S&F of recessed type adjustable LED round down lights with 9/10/12 W indoor decorative luminaries with and including electronic driver and LED lamp including wire suspenders ceiling coupler, including taking down old unserviceable fittings. Make: Bajaj cat no. BRDC SL 9W WH or Magik cat no PCHP012C or Surya SLE DLR 10W steller Pro SQ or equivalent product of Philips/Havells

Taking down unserviceable sub main wiring any size including conduit/ casing caping and making good to the disturbed surface complete all as directed.

M&L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through PVC conduit concealed type all as specified and as directed.

M&L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through PVC conduit concealed type all as specified and as directed..

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 6 Sqmm 2 core in shed/duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified & directed by the Engr-in-Charge as in repair.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 25 Sqmm 3.5 core in shed/duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified & directed by the Engr-in-Charge as in repair.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 70 Sqmm 3.5 core in shed/duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified & directed by the Engr-in-Charge as in repair.

Taking out the existing XLPE cable of any type and any size any core from shed and refixing on walls with provision of saddle and lugs, joints etc including connection complete all as directed by Engineer-in-charge.

M&L for straight through cable jointing kit heat shrinkable for LT 1100 Volts grade complete with jointing materials and accessories suitable for 3.5 / 4 core XLPE armoured conductor cable of 6 Sqmm 2 core size including testing of cable after joints complete all as specified and directed

M&L for straight through cable jointing kit heat shrinkable for LT 1100 Volts grade complete with jointing materials and accessories suitable for 3.5 / 4 core XLPE armoured conductor cable of 25 Sqmm 3.5 core size including testing of cable after joints complete all as specified and directed

M&L for straight through cable joint kit heat shrinkable for LT 1100 Volts grade complete with jointing materials and accessories suitable for 3.5 / 4 core XLPE armoured conductor cable of 70 Sqmm 3.5 core size including testing of cable after joints complete all as specified and directed

Shree Mahabir Builders

M/s Dhani Enterprise

INDIA ELECTRICAL EQUIPMENTS

NIRMAL SALES CORPORATION