Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹2.0 LAdmitted-Finance | -2.00% | ₹2.0 L | L1 | Admitted-Finance |
| 2 | Rejected-Technical SRINAGAR AIRPORT SRINAGAR AIRPORT SRINAGAR AIRPORT BUDGAM JAMMU KASHMIR 190007 | BUDGAM | JAMMU AND KASHMIR | 190007 | - | - | - | Rejected-Technical GST, Annual Turnover and CDR not uploaded |
Tender Value
₹2 L
EMD Value
₹4,000
Closing Date
18 Sept 2026, 2:00 pmClosed
General Manager (Works)
SASB, Panthachowk Srinagar
Annual repair and Maintenance of SASB Qtrs at Srinagar by way repairs to damaged roofs and walls ,washrooms and drainages etc and other civil works Yatra 2026.
2026_SASB_324521_1
SASB/eNIT/2026/17
Open Tender
Civil Works
Percentage
10 days
Srinagar
Please refer Tender documents.
2 documents required · 2 mandatory
₹472
J and K Bank 0110040100014077
₹4,000
21 Sept 2026
12 Sept 2026
19 Sept 2026
12 Sept 2026
18 Sept 2026
12 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth, lead upto 50meter and lift upto 1.5m, as directed by Engineer-in-Charge.
All kinds of soil : | 30 | Sqm | 91.75 | ₹2,752.5 |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). | 0.5 | cum | 5,202.9 | ₹2,601.45 |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) and work shall include accurate fixing of bolts in correct position,alignment and level.Complete job. | 1 | cum | 5,733.6 | ₹5,733.6 |
| 4 | Centering and Shuttering including strutting , and propping etc and removal of formwork | 10 | sqm | 286.35 | ₹2,863.5 |
| 5 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,
bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm | 150 | sqm | 809.9 | ₹1,21,485 |
| 6 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer all complete.
Welded angle iron 50x50x6mm and flat iron 40x5 mm | 100 | kg | 138 | ₹13,800 |
| 7 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches duringtransportation and should be supplied in single length upto 12 metre or asdesired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete uptoany pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 30 | sqm | 706.5 | ₹21,195 |
| 8 | Painting on G.S sheets with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer .but excluding a coat of mordant solution. | 60 | Sqm | 149.05 | ₹8,943 |
| 9 | Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) with all carriages of material. | 5 | Rm | 500 | ₹2,500 |
| 10 | Engagement of labours for grass cutting and site clearance | 8 | no | 720 | ₹5,760 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.34 MB
BOQ_1094664.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .