Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.5 LAccepted-AOC 195 MAHESH NAGAR AMBALA CANTT 133001 | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹14.8 L+₹95,455 (6.87%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹15.4 L+₹1.5 L (10.5%)Rejected-Finance H NO 29 DEVILAL COLONY TCP 2 HISAR CANTT HARYANA | HISAR | HISAR | HARYANA | 125006 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹15.4 L+₹1.5 L (11.0%)Rejected-Finance H NO 861 SECTOR 1 4 HOUSING BOARD COLONY NEAR POLY CLINIC HISAR HARYANA | HISAR | HARYANA | 125001 | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹19.8 L+₹5.9 L (42.4%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
| Sl No | Description | Qty | Unit | Raman Electric Trading Co L1 | M/s Devendera construction L3 | fauji electric works L2 | SAINI ELECTRIC STORE L5 | M/S SURJIT CONSTRUCTION COMPANY L6 | Natwadia Electrical Company L4 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Disconnecting the existing incoming & outgoing connections and inspection, servicing, overhauling, testing, checking and calibration of VCB panel, 11 kV, vertical or horizontal isolation, installed with VCBs and connected relays/ accessories including servicing, cleaning, tightening of loose mechanical mechanism, greasing, inspection of busbar, CTs/PTs, internal wiring of control panel, indicators, measuring of IR value, calibration of IDMT relays, replacement of unserviceable spare parts, testing of tripping system, to maintain desired insulation level of each panel and removing all type of dust and settled dirt by mechanical means including testing complete all as specified and as directed including the followings: -
(a) Cleaning of Vacuum Circuit Breaker with CRC-226.
(b)Removal of old grease and re-greasing the same with recommended grease
(c) To check the condition of SIC contacts.
(d) Checking condition and alignment of jaw contact.
(e) Checking and proper tightening of hardware.
(f) Checking of proper closing/ open of all poles.
(g) Checking of breaker tripping through push button.
(h) Checking and adjusting gap between hylem sheet and side plate.
(i) Checking motor operation in case of EDO.
(j) Checking auxiliary contacts continuity proper change over.
(k) Checking of presence if circlips.
(l) Checking IR between phase to phase (VCB closed condition).
(m) Checking IR between phase to earth (VCB closed condition).
(n) Checking IR between phase to earth (VCB open condition).
(o) Cleaning and providing lubricants on movable mechanical parts.
(p) Testing of relays through secondary injections.
(q) Tripping of VCB through Buchholz relay/ OTI/WTI if required.
(r) Testing of CTs and PT.(s) Testing of contact resistance of VCBs
(s) Contact resistance Test (CRM) testing of VCBs.
Note: - (i) The quoted rate shall be inclusive of required T & P for including servicing, overhauling, calibration and testing etc.
(ii) The new spare parts required for replacement shall be paid and measured separately as supply only or supply and fix in repairs as mentioned under the relevant item.
(iii) Servicing, overhauling, calibration and testing etc. shall be carried out as per the Manufacturer’s instructions/ guideline and by the authorised rep of the manufacturer. The certificate shall be rendered by the company for effective and properly functioning of the VCB. The necessary literature shall be made available to the department. The quoted rate shall be inclusive of these aspects. | 42 | Each Job | 7,500 ₹3,15,000 | 7,000 ₹2,94,000 | 4,250 ₹1,78,500 Lowest | 6,777 ₹2,84,634 | 5,500 ₹2,31,000 | 5,000 ₹2,10,000 |
| 2.00 | Supplying, installation, commissioning and testing in replacement of PT unit three phase, three limbs, upto 11 KV draw-out type, resin cast dry type, single ratio having primary voltage 11 KV & secondary voltage 110 volts, 50 VA class-1 including necessary bus bar connections & wiring for metering complete suitable for any make of VCB as per existing all as specified and directed . | 2 | Each Set of three | 19,000 ₹38,000 | 18,000 ₹36,000 Lowest | 20,000 ₹40,000 | 37,777 ₹75,554 | 35,000 ₹70,000 | 21,500 ₹43,000 |
| 3.00 | Supplying, installation, commissioning and testing in replacement of 11 KV Current Transformer (CT`s), indoor type, resin cast epoxy type, of 13.1 KA/Sec having ratio 400/200/5-5 Amps having Core1: Class 5P10, 10VA for protection , Core2: Class 0.5, 10VA for metering including fuses, associated wiring complete suitable for any make of VCB as per existing all as specified and directed . | 1 | Each Set of three | 19,000 ₹19,000 | 18,000 ₹18,000 Lowest | 20,000 ₹20,000 | 22,777 ₹22,777 | 28,000 ₹28,000 | 22,000 ₹22,000 |
| 4.00 | All as per item No 3 here-in-before but having ratio 200/100/5-5 | 1 | Each Set of three | 19,000 ₹19,000 | 18,000 ₹18,000 Lowest | 20,000 ₹20,000 | 22,777 ₹22,777 | 28,000 ₹28,000 | 21,000 ₹21,000 |
| 5.00 | All as per item No 3 here-in-before but having ratio 150/75/5-5 | 1 | Each Set of three | 16,000 ₹16,000 Lowest | 18,000 ₹18,000 | 20,000 ₹20,000 | 22,777 ₹22,777 | 30,000 ₹30,000 | 21,000 ₹21,000 |
| 6.00 | All as per item No 3 here-in-before but having ratio 300/150/5-5 | 1 | Each Set of three | 19,000 ₹19,000 | 18,000 ₹18,000 Lowest | 20,000 ₹20,000 | 22,777 ₹22,777 | 30,000 ₹30,000 | 18,000 ₹18,000 Lowest |
| 7.00 | S&F in replacement of LED indication lamp for breaker ON/OFF/TRIP/Breaker Spring Charged/R-Y-B etc for 11 KV control panel including associated wiring, if reqd, complete all as specified and directed. | 25 | Each | 120 ₹3,000 | 100 ₹2,500 | 100 ₹2,500 | 97 ₹2,425 | 50 ₹1,250 Lowest | 70 ₹1,750 |
| 8.00 | S&F in replacement Anti-condensation space-heater withThermostatic control in cable and circuit breaker compartments of HT switchgears complete all as specified and directed. | 20 | Each | 700 ₹14,000 | 600 ₹12,000 Lowest | 950 ₹19,000 | 777 ₹15,540 | 1,500 ₹30,000 | 900 ₹18,000 |
| 9.00 | S&F in replacement of vacuum interrupter suitable for 400/630/800 amps, 11 KV HT VCB complete all as specified and directed | 6 | Each Set of three | 20,000 ₹1,20,000 | 25,000 ₹1,50,000 | 25,000 ₹1,50,000 | 17,777 ₹1,06,662 Lowest | 35,000 ₹2,10,000 | 25,000 ₹1,50,000 |
| 10.00 | S&F in replacement of Copper Bus Bar including suitable size insulation for 400/630/800 amps, 11 KV HT VCB panel complete suitable for any make of VCB as per existing all as specified and directed . | 40 | Kg | 1,500 ₹60,000 | 1,000 ₹40,000 Lowest | 1,400 ₹56,000 | 1,477 ₹59,080 | 1,550 ₹62,000 | 1,500 ₹60,000 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
21 Aug 2025, 6:00 pmClosed
Commander Works Engineer
HQ CWE HISAR, HISAR MIL STN HISAR
REPAIR MAINT OF HT SWITCH GEARS RELAYS VCB RMU INCLUDING OTHER WORKS AT HISAR MIL STN UNDER GE HISAR
2025_MES_721899_1
CWE/HSR-35 OF 2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
HISAR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE HISAR
₹50,000
13 Oct 2025
22 Jul 2025
25 Aug 2025
22 Jul 2025
21 Aug 2025
6 Aug 2025
23 Jul 2025 - 30 Jul 2025
Amount
Disconnecting the existing incoming & outgoing connections and inspection, servicing, overhauling, testing, checking and calibration of VCB panel, 11 kV, vertical or horizontal isolation, installed with VCBs and connected relays/ accessories including servicing, cleaning, tightening of loose mechanical mechanism, greasing, inspection of busbar, CTs/PTs, internal wiring of control panel, indicators, measuring of IR value, calibration of IDMT relays, replacement of unserviceable spare parts, testing of tripping system, to maintain desired insulation level of each panel and removing all type of dust and settled dirt by mechanical means including testing complete all as specified and as directed including the followings: - (a) Cleaning of Vacuum Circuit Breaker with CRC-226. (b)Removal of old grease and re-greasing the same with recommended grease (c) To check the condition of SIC contacts. (d) Checking condition and alignment of jaw contact. (e) Checking and proper tightening of hardware. (f) Checking of proper closing/ open of all poles. (g) Checking of breaker tripping through push button. (h) Checking and adjusting gap between hylem sheet and side plate. (i) Checking motor operation in case of EDO. (j) Checking auxiliary contacts continuity proper change over. (k) Checking of presence if circlips. (l) Checking IR between phase to phase (VCB closed condition). (m) Checking IR between phase to earth (VCB closed condition). (n) Checking IR between phase to earth (VCB open condition). (o) Cleaning and providing lubricants on movable mechanical parts. (p) Testing of relays through secondary injections. (q) Tripping of VCB through Buchholz relay/ OTI/WTI if required. (r) Testing of CTs and PT.(s) Testing of contact resistance of VCBs (s) Contact resistance Test (CRM) testing of VCBs. Note: - (i) The quoted rate shall be inclusive of required T & P for including servicing, overhauling, calibration and testing etc. (ii) The new spare parts required for replacement shall be paid and measured separately as supply only or supply and fix in repairs as mentioned under the relevant item. (iii) Servicing, overhauling, calibration and testing etc. shall be carried out as per the Manufacturer’s instructions/ guideline and by the authorised rep of the manufacturer. The certificate shall be rendered by the company for effective and properly functioning of the VCB. The necessary literature shall be made available to the department. The quoted rate shall be inclusive of these aspects.
Supplying, installation, commissioning and testing in replacement of PT unit three phase, three limbs, upto 11 KV draw-out type, resin cast dry type, single ratio having primary voltage 11 KV & secondary voltage 110 volts, 50 VA class-1 including necessary bus bar connections & wiring for metering complete suitable for any make of VCB as per existing all as specified and directed .
Supplying, installation, commissioning and testing in replacement of 11 KV Current Transformer (CT`s), indoor type, resin cast epoxy type, of 13.1 KA/Sec having ratio 400/200/5-5 Amps having Core1: Class 5P10, 10VA for protection , Core2: Class 0.5, 10VA for metering including fuses, associated wiring complete suitable for any make of VCB as per existing all as specified and directed .
All as per item No 3 here-in-before but having ratio 200/100/5-5
All as per item No 3 here-in-before but having ratio 150/75/5-5
All as per item No 3 here-in-before but having ratio 300/150/5-5
S&F in replacement of LED indication lamp for breaker ON/OFF/TRIP/Breaker Spring Charged/R-Y-B etc for 11 KV control panel including associated wiring, if reqd, complete all as specified and directed.
S&F in replacement Anti-condensation space-heater withThermostatic control in cable and circuit breaker compartments of HT switchgears complete all as specified and directed.
S&F in replacement of vacuum interrupter suitable for 400/630/800 amps, 11 KV HT VCB complete all as specified and directed
S&F in replacement of Copper Bus Bar including suitable size insulation for 400/630/800 amps, 11 KV HT VCB panel complete suitable for any make of VCB as per existing all as specified and directed .
S&F in replacement of fixed contact block complete suitable for 400/630/800 amps, 11 KV HT VCB complete all as specified and directed
S&F in replacement of moving contact block complete suitable for 400/630/800 amps, 11 KV HT VCB complete all as specified and directed
S&F in replacement of motor & gear assembly 230V AC suitable for 400/630/800 amps, 11 KV HT VCB including testing & puting on load complete all as specified & directed.
S&F in replacement of spring bearing gear suitable for 400/630/800 amps, 11 KV HT VCB complete all as specified and directed
S&F in replacement of closing coil assembly 24 volts DC suitable for 400/630/800 amps, 11 KV HT VCB complete all as specified and directed
S&F in replacement of tripping coil assembly 24 volts DC suitable for 400/630/800 amps, 11 KV HT VCB complete all as specified and directed
S&F in replacement Reel insulator for 11 KV HT VCB of capacity 400/630/800 Amps capacity all as specified and directed.
S&F in replacement of panel door lock suitable for 400/630/800 amps, 11 KV HT VCB complete all as specified and directed
S&F in replacement auxillary switch suitable for 400/630/800 amps, 11 KV HT VCB complete all as specified and directed
S&F in replacement T&C Switch for Breaker ON/OFF purpose in HT 11 KV VCB panel including associated wiring, if reqd, for proper functioning of switch complete all as specified and directed.
S&F in replacement support road with screws suitable for 400/630/800 amps, 11 KV HT VCB complete all as specified and directed
S&F in replacement support insulator suitable for 400/630/800 amps, 11 KV HT VCB complete all as specified and directed
S&F in replacement upper connector suitable for 400/630/800 amps, 11 KV HT VCB complete all as specified and directed
S&F in replacement lower connector suitable for 400/630/800 amps, 11 KV HT VCB complete all as specified and directed
S&F in replacement set of 6 Nos fixed arcing contacts suitable for 400/630/800 amps, 11 KV HT VCB complete all as specified and directed
S&F in replacement Caution plate “CAUTION MEN AT WORK of size 40cmx15cm made out of white acrylic sheet with Red coloured glow tape.
S&F in replacement of HRC fuse of capacity 20 Amps for VCB complete all as specified and directed
S&F in replacement of Digital Volt meter Secondary voltage 110 V for 11 KV VCB Control Panel.
Calibration of relays, for HT 11 KV VCB of any description through primary and secodary injection method and testing complete re-setting where required and ensuring proper functioning of earth fault and over current relays complete all as specified and directed.
S&F in replacement breaker operating mechanism of VCB Make CG/Areva/ Seimens
S&F in replacement over current and earth fault Numerical relay suitable for existing VCB panel including taking down old unserviceable one complete all as specified and directed.
Indicating lamps LED,24V,2 Watt with holder,any type ( Red/ Green/ White/ Amber /blue)
S&F and installation of battery 12 volts,180 AH, dry type in replacement of old unserviceable battery in battery charger with suitable size of new copper battery terminal and lugs and initialy charging, commissioning and testing complete.
Disconnecting electric supply and earthed the Ring Main Unit (RMU) of cap upto 800 Amps of any make of rating 11 KV, opening of the RMU for servicing / overhauling the mechanism including cleaning and servicing, greasing, oiling of the parts etc reassembling the RMU after overhuling / servicing and its testing complete all as specified and directed. Make of RMU : ABB/CG/Areva/ Seimens/Schneider/C&S or equivalent Note :- The quoted rate of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced parts shall be measured and paid separately under appropriate item of Sch 'A' as supply only.
S&F in replacement of Bushing for existing RMU panel including taking down old unserviceable bushing complete all as specified and directed. Make of RMU : ABB/CG/Areva/ Seimens/Schneider/C&S or equivalent
S&F in replacement of Bushing Boot for existing RMU panel including taking down old unserviceable bushing boot complete all as specified and directed. Make of RMU : ABB/CG/Areva/ Seimens/Schneider/C&S or equivalent
S&F in replacement CT for existing RMU panel including taking down old unserviceable CT complete all as specified and directed. Make of RMU : ABB/CG/Areva/ Seimens/Schneider/C&S or equivalent
S&F in replacement Mechanism for existing RMU panel including taking down old unserviceable Mechanisam complete all as specified and directed. Make of RMU : ABB/CG/Areva/ Seimens/Schneider/C&S or equivalent
S& filling SF 6 Gas for existing RMU panel including complete all as specified and directed. Make of RMU : ABB/CG/Areva/ Seimens/Schneider/C&S or equivalent
S&F in replacement Relay for existing RMU panel including taking down old Relay unserviceable Mechanisam complete all as specified and directed. Make: ABB/CG/Areva/ Seimens/Schneider/C&S or equviva
S&F in replacement Triping coil for existing RMU panel including taking down old unserviceable Triping coil complete all as specified and directed. Make of RMU : ABB/CG/Areva/ Seimens/Schneider/C&S or equivalent
S&F in replacement Insulator for existing RMU panel including taking down old unserviceable Insulator complete all as specified and directed. Make of RMU : ABB/CG/Areva/ Seimens/Schneider/C&S or equivalent
S&F in replacement charging Socket for existing RMU panel including taking down old unserviceable charging Socket complete all as specified and directed. Make of RMU : ABB/CG/Areva/ Seimens/Schneider/C&S or equivalent
S&F in replacement Virtual path indicator for existing RMU panel including taking down old unserviceable Virtual path indicator complete all as specified and directed. Make of RMU : ABB/CG/Areva/ Seimens/Schneider/C&S or equivalent
M& L for preparation of old painted surfaces by removing dust, rust oil and scraping etc for painting the VCBs panel inside and out side with the help of jet spray paints in different location with two coats of synthetic enamel paint for matching of existing colour over the existing painted surfaces after apply putty and a coat of red oxide primer and writing SM/MES No, Feeder details in black letter complete all as specified & as directed
S&F and installation of battery for RMU relay as per existing size capacity 3.6 V 2600 MAH complete all as per directed
S&F and installation of battery for RMU relay as per existing size capacity 3.6 V 1/2AA complete all as per directed
S&F and installation of battery for RMU relay as per existing size and capacity as per sample complete all as per directed
fauji electric works (BID ID -3394087)
M/s Devendera construction (BID ID -3393699)
Natwadia Electrical Company (BID ID -3401136)
SAINI ELECTRIC STORE (BID ID -3401272)
M/S SURJIT CONSTRUCTION COMPANY (BID ID -3393146)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .