GEAFU-09/2025-26

Amount

Supply of SMC Ceiling panel size 1000x1000x70 mm complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation.

Supply of SMC Ceiling Bottom panel size 1000x1000x75mm complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply of SMC Side/Wall panel Wall size 1000x2000x50mm complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply of SMC Ceiling Man hole size 1000x1000x70 mm complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply of SMC Ceiling Drain panel size 1000x1000x70mm complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply of SMC HDG Corner Frame size 75x75x3x200 CA-20mm complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply of SMC HDG FLANGE Reinforced Bar (Plate) Frame size 50x3tx900Lmm complete all as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply of SMC Pvc Sealing Tape size 70x3 mm complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply of SMC HDG Steel Nut -Bolt With Two Washers M16X40 L complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supplyof SMC HDG Steel Nut -Bolt With Two Washers M12X40 L complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply of SMC HDG Steel Nut -Bolt With Two Washers1/2"x2.5"L complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply of SMC PVC air vent 100mm dia complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply of FRP Internal support pipe ISP-20 1910 MM complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply of FRP Internal ladder FIL-20 1860 MM complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply of Water level indicator LG-20 MM complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply Inlet Set -Flange WITH 9" Nipple 50NB complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply and Connection item Outlet Set -Flange WITH 9" Nipple 100NB complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply and Connection item Drain Set -Flange WITH 9" Nipple 50NB complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply and Connection item Over flow Set Tank Joint 50NB complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply of MS item MS External Ladder with Fixing IL-20 2800 MM Long ver floe Set Tank Joint 50NB complete all aas directed by Engineer-in-Charge or as per manufacturer recommendation

Supply of MS Vertical Post-MC-150X75X2150MM Long P-20 complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply of MS Tie Rod dia -5/8 inch x5600mm long T-1 complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply of MS Cleat Angle-50x6x86mm Long C-1 86 MM Long complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

Supply of MS Cleat Angle-50x6x50 mm long C-1 50MM Long complete all as specifed and as directed by Engineer-in-Charge or as per manufacturer recommendation

M & L Constuction of platform having RCC Column of size minimum 23mm x 23mm upto 1 meter height or as per manufacturer recommendation. The typical drawing No SMCPT/ GRILL/2024-25/0254-24G (att for ready ref) for placing of SMC panel tanks for water storage at height 2mtr maximum as confinming with IS 14399:1996 and material confirming as per IS 4249:1967 for fire retardant required capacity of suitable size incluiding fixing and assembling erecting the tank complete as per directino of Enginer In Charge the tracks to be leak proof after installation Connection item HDG Grillage for 24 KL complete all as specified and directed by Engineer in Charge.

Supply and laying 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 6 (PN 20) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete of size outer dia 63 mm including all PPR brassfittings as required complete all as specified and directed by Engr-in-charge. Make : SFMC/ Supreme/vectus/Prince

Supply and laying 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 6 (PN 20) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete of size outer dia 50 mm including all fittings complete all as specified and directed by Engr-in-charge. Make : SFMC/ Supreme/vectus/Prince

Supply and laying 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 6 (PN 20) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete of size outer dia 40 mm including all PPR brassfittings as required complete all as specified and directed by Engr-in-charge. Make : SFMC/Supreme/vectus/Prince

Supply and laying 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 6 (PN 20) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete of size outer dia 25 mm including all PPR brassfittings as required complete all as specified and directed by Engr-in-charge. Make : SFMC / Supreme/vectus/Prince

Supply and fix PPR Gate Valves (Brass Insert) of 63 mm bore complete all as specified and directed

Supply and fix PPR Gate Valves (Brass Insert) of 50 mm bore complete all as specified and directed

Supply and fix PPR Gate Valves (Brass Insert) of 40 mm bore complete all as specified and directed

Supply and fix PPR Gate Valves (Brass Insert) of 25 mm bore complete all as specified and directed

Supply and fix PPR ball Valves (Brass Insert) of 63 mm bore complete all as specified and directed

Supply and fix PPR sluice Valves (Brass Insert) of 63 mm bore complete all as specified and directed

M&L for making connection of PP-R distribution branch with PPR - main of size 50 to 75 mm by providing and fixing tee including cuting and making fusion joints etc complete all as specified and directed.

M&L for making connection of PP-R distribution branch with PPR - main of size 16 to 40 mm by providing and fixing tee including cuting and making fusion joints etc complete all as specified and directed.

M&L for construction of brick masonry valve pit 950 x 950 x 950 mm (outer dimension) with sub class 'B' bricks old size built in CM 1:4, PCC 1:2:4 type B-1 as in foundation concrete, bed/ floors, coping and 10 mm thick rendering in CM 1:4 on internal and exposed external surfaces, external plaster shall be upto 15 cm below GL and mixed with water proofing compound @ 2% by weight of cement with and including 40 X 40 X 6 mm angle iron frame 3.15 mm thick MS sheet cover with locking arrangements and one No. 50 mm size 4 lever MS lock with key in duplicate including excavation and earthwork in soft/loose soil, painting steel surface with two coats of black bituminous paint over a coat of red oxide primer complete all as specified and directed.

Supply, install, testing and commissioning of centrifugal pumping set mounted on common base plate foundation with discharge pumping 1180 LPM at 70 Mtr head directly coupled with electric motor of capacity 30 HP complete with all accessories including Rain guard protection for pumps with aluminium of non corrasive sheet and Necessary power cable and control cable as per suitable length for connection for pump to Panel complete all as specified and directed by Engineer in Charge. Make : Kirloskar / Beacon/Crompton

Supply and fix insulation for distribution line and main raising line of dia 40 mm PPR Pipe outer dia in two layers, thickness on one layer not less than 20 mm complete all as specified and directed by Engineer in Charge.

Supply and fix insulation for distribution line and main raising line of dia 25 mm PPR Pipe outer in two layers, thickness on one layer not less than 20 mm complete all as specified and directed by Engineer in Charge.

Supply and fix Hot water storage tank of cap. 5000 Liters Pressurized with Inlet and outlet connection drain connection with flanges one manhole 550 mm in bottom for cleaning for tank having Thermometer, Thermal Bleed Valve, Y Strainer Tank will be of MS Epoxy coated With Shall Thickness 6 Mm Dish 8 Mm tank will be dully insulation of 100MM Glass wool 24 Gauge Aluminum Cladding with MS Stand with electrical Provision With Safety Valve, check valve complete all as specified and direccted with provision of the following :- Make : AO Smith India water product Pvt Ltd or equivelant to Climaveneta/Willo (a) Supply and fixing Heat Pump of capacity 42Kw output capacity input Capacity 9.36 kw in normal working conditions to heat water up to 55° C to minus 60 °C having High and low voltage Protections switch Having Temperature and Pressure relief Valve Input Power 9.36 Kw With Controller complete all as specified and directed (b) Supply and fixing of Circulation Pump with pressure Switch, Pressure Gauge with hot return valve Thermal overload protection CM 10-1 pump 3 Phase of suitabe capacity including electric connection with material like copper conductor cable and necessary T&P complete all as specified and directed. Make : Grundfos (c) Supply and fixing piping Interconnection for Heat Pump and Tank with composite Pipe, All Fitting Gate Valve Tee and Elbow Only Tank to Heat Pump connection complete all as specified and directed. Make :Vectus (d) Supply and fixing Main Central Control Panel including Installation complete all as specified and directed.

Supply and laying in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade, ISI marked of size 95 Sq.mm 3.5 core, LT cable (heavy duty), XLPE insulated served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed with stranded aluminium conductor cable including commissioning and testing complete all as specified and directed.

Supply and laying in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade, ISI marked of size 35 Sq.mm 3.5 core, LT cable (heavy duty), XLPE insulated served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed with stranded aluminium conductor cable including commissioning and testing complete all as specified and directed.

M&L Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface cashing capping, heavey duty and connected to main board and making good disturbed surface complete all as specified and as directed.Make of conductor : Havells/polycab/KEI Note: Two runs each of 10.00 sqmm main cable and one RM of 10.00 sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

Supply and fix hot water storage tank of capacity 450 Litres model No EES 120 with integrated water heat Pump of capacity 12 Kw with storage tank capacity 450 Lts. Make CAHP - 3.0 DI - 120 12kw in normal working conditions to heat water up to 55 °C to minus 60 ° C having High and low voltage Protections switch Having Temperature and Pressure relief Valve Input Power 9.36 Kw With Controller, Circulation Pump with pressure Switch, Pressure Gauge with hot return valve Thermal overload protection CM 10-1 pump 3 Phase Piping Interconnection for Heat Pump and Tank with composite Pipe, All Fitting Gate Valve Tee and Elbow Only Tank to Heat Pump connectionmain Central Control Panel including Installation complete all as specified and directed. Make : AO Smith India water product Pvt Ltd / Climaveneta/Willo

Excavation in trenches in any type of soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables, RCC poles/stays and struts etc or /getting out cable cover and stacking for reuse/ credit , trimming sides and forming bottom surface all as specified and directed at site.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for dry sand cushioning to underground cables before laying of cables and after laying and stretching of Cable and well ramming in layers complete all as specified and directed. Note :Thickness of sand is to be measured after punning down sand.

M&L Common burnt sub class ‘B’ brick laid flat in trenches over and across the length of cable with length of brick perpendicular to the direction of cable adjacent/abutting each other complete all as specified and directed for cable protection.

ASIA BUILDER (BID ID -3341745)

ANIKET TRADERS (BID ID -3345025)

MAHAJAN TRADING CO (BID ID -3339997)

shivom builders (BID ID -3346119)