SPL REP TO BLDG NO T-1 OF JAKLI AT MORABADI, PROV OF PIPELINES FROM BOREWELL TO UNITLINE AREA OF RAMESHWARAM LINES AT MORABADI, PROVN OF REPALCEMENT OF OLD CONVENTIONAL LIGHT FITTINGS WITH LEDFITTINGS FOR ENERGY CONSERVATION AT 3/8 GR UNDER GE RANCHI

Amount

Demolition of brick wk masonry built in cement mortar incldg all quoins arches pillars etc, complete all as specified and directed.

Dismantling of wall and ceiling board (fibre, pulp, insulation etc.) or insulation boards/ slabs/ blanket, any thickness, including cover fillet, complete all as specified and directed.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering, complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, incl Nanital or similar pattern roof covering, complete all as specified and directed.

Dismantling structual steel work including doors, gates but excluding framed truss etc, complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), incl all fittings etc, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls/concrete surface etc. including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

S&F Powder coated GI frame work for false ceiling of size of grid 605 x 605mm (consisting of angle or tee section size 24 x 24 x 1.5mm thick angle section and 24 x 32 x 1.5 mm Tee Section) Powder coated GI snap grid hanging with 02 mm dia GI hanger/wire fixed with steel dashed fastners, complete all as specified and directed.

M&L 4mm thick non asbestos fibre cement designer building board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping.

S&F Pre-painted galvalum alm zink coating GI based corrugated/ semi - corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with coach screw as per manufacturers instrution, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering as ridge/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F for Roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc complete Fe 410-W(Gde E-250) quality-A, complete all as specified and directed.

S&F Flat iron/ angle iron.

M&L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6, complete all as specified and directed.

M&L Brick work with sub class 'B' Brick straight or curved on plain to any radius in half brick thick wall built in cm 1:4, complete all as specified and directed.

M&L 10mm thick rendering on fair faces of brick work/concrete surface in CM (1:6) surface finished fair & even, complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) with applying water proofing compound (As per manufrature instruction) surface finished fair & even, complete all as specified and directed. (WPC will be paid saperatelly)

M&L applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described, complete all as specified and directed.

M&L applying one coats of synthetic enamel paint including preparation of existing old steel surfaces of any description over 10cm width or girth not otherwise described.

M&L for preparation old existing plastered surface for applying two coats of distemper oil emulsion over a coat of 1mm thick plaster of paris putty applying on existing surface for even and smooth, complete all as specified and directed.

M&L for preparation newly plastered surface for applying two coats of distemper oil emulsion over a coat of 1mm thick plaster of paris putty applying on existing surface for even and smooth, complete all as specified and directed.

M&L preparation of new surface of wall and applying two coat of cement base paint, in any colour, complete all as specified and directed.

M&L preparation of existing surface of wall and applying one coat of cement base paint, in any colour, complete all as specified and directed.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc, complete all as specified and directed.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface, complete all as specified and directed.

Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades, complete all as specified and as directed.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster, complete all as specified and directed for following :-

One light point controlled by one, one way switch 5 Amps.

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

Description all as per item No 4 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

S&F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site, complete all as specified and directed.

S&F for Switch Piano type single pole 15/16 amp, 230 Volts complete all as specified and directed at site, complete all as specified and directed.

S&F for socket outlet 2 in 1, 5 pin, 5 amp, 230 Volts complete all as specified and directed at site, complete all as specified and directed.

S&F for socket outlet 2 in 1 , 5 pin, 5/15 amp, 230 Volts, complete all as specified and directed at site.

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

S & F for stepped type electronic fan regulator flushType complete all as specified and directed at site.

M&L sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire, complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit

S&F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall, complete all as specified and as directed.

S&F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall, complete all as specified and as directed.

S&F MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve, complete all as specified and as directed.

S&F MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve, complete all as specified and as directed.

S&F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve, complete all as specified and as directed.

S&F for decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 watts, complete all as specified and as directed. Make Havells Cat No LHDLO6160099 or Philips, Bajaj.

S&F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting, complete all as specified and as directed. Make :- Make Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI or equivalent in Philips & Havells.

Labour only for taking down and refixing 36 W recess mounting LED low glare luminiaires 2X2 with paralite powder coated CRCA sheet steel housing perforated metalic frame, complete all as specified and directed.

Taking down old unserviceable tube light fitting, mirror light, bulk head light fitting and security light of any size, complete all as specified and directed.

S&F LED type tube light fittings 1x20W 230 V industrial box type luminaire with CRCA body precoated white & pre wired for LED tube complete fixed on wall / ceiling by suitable down rods, PVC round blocks and connection by flxible PVC cable with stranded copper conductor from ceiling rose to connector of the fitting including 1x20W LED tube rod, complete all as specified and directed.

S&F in replacement existing UNSV tubelight fitting with LED 20 W inverter batten type fitting 4 feet long aluminium extruded housing with 4 hours backup time after 10-12 hrs charging time P-20, rated voltage 230 V, 50 HZ, system wattage 20W +/-10%, system current less than 102 mA, power factor more than 0.95, system lumen efficiency more than 85% complete all accessories prewired and connected electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed.

S&F LED type MIRROR light fittings 1x 8W 230 V compact & sturdy LED decoritive fixture with anti glare poly carbonatevdiffuser & pre wired for LED light complete fixed on wall and connection by flexible on wall and connection by flxible PVC cable with stranded copper conductor from ceiling rose to connector of the fitting including suitable 1X8W LED light, complete all as specified and directed.

S&F LED Lamp inverter type 9 watt 230 volts, 50 HZ lumen 900 lm, rated current 45 mA, CRI less than 80, charging time 8 to 10 hrs, operating temperature- 10 to 50 degree celcius back time 04 hours, complete all as specified and directed.

LED type BULK HEAD light fittings 1x 9W 230 V acrylic diffuser & frame IP 65 protection & pre wired for LED light complete fixed on wall and connection by flexible on wall and connection by flexible PVC cable with stranded copper conductor from ceiling rose to connector of the fitting including suitable 1X10W LED light, complete all as specified and directed.

S&F LED Security light fittings 60 W,230V ,having system lumens 3200and IP protection IP 20,clas I,CRCA housing ,recess mounting THD,10% and PF>0.95 complete including housing all pre wired with high efficiency electronic ballast complete fixed to wall including, PVC round blocks and connection by flexible PVC cable with stranded copper conductor from ceiling rose to connector of the fitting including LED lamp complete all as specified.Make : Crompton Greaves cat ref LSTP-60-CDL or Havells,Bajaj & Crompton Greaves.

Excavation in trenches not exceeding 1.5 wide and not exceeding 1.5 mtr in depth in soft/loose soil for laying of pipes and getting out complete, all as specified and as directed.

Returning, filling in and including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete, all as specified and directed.

Removing excavated surplus materials to a distance not exceeding 50 Mtrs and deposited where directed at a level not exceeding 1.5 Mtr above the starting point complete, all as specified and directed.

S&F GI Tubing medium grade ISI marked including all fittings laid in trenches/fixed on wall of size 15 mm bore, complete all as specified and directed.

S&F GI Tubing medium grade ISI marked including all fittings laid in trenches of size 20 mm bore, complete all as specified and directed.

All as per item No 55 above but of 25 mm dia.

All as per item No 55 above but of 40 mm dia.

All as per item No 55 above but of 50 mm dia.

S&F of gun metal gate or globe valves with iron wheel head, screwed both ends for iron pipe and fixed of size 15 mm dia, complete all as specified and directed.

S&F of gun metal gate or globe valves with iron wheel head, screwed both ends for iron pipe and fixed of size 20 mm dia, complete all as specified and directed.

S&F of gun metal gate or globe valves with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm dia, complete all as specified and directed.

S&F of gun metal gate or globe valves with iron wheel head, screwed both ends for iron pipe and fixed of size 40 mm dia, complete all as specified and directed.

S&F of gun metal gate or globe valves with iron wheel head, screwed both ends for iron pipe and fixed of size 50 mm dia, complete all as specified and directed.

M&L for construction of brick masonry valve chamber of size 450x450x450 mm (Internal dimension) including necessary excavation and earth work in any type of soil angle iron frame MS Sheet cover with locking arrangements including painint two coats of synthetic enamel pain over a coat of red oxide primer, complete all as specified and directed.

M&L for construction of brick masonry valve chamber of size 600x600x600 mm (Internal dimension) including necessary excavation and earth work in any type of soil angle iron frame MS Sheet cover with locking arrangements including painint two coats of synthetic enamel pain over a coat of red oxide primer, complete all as specified and directed.

M K Enterprises

M/s Dwarika Nath Singh