Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.5 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹13.1 L+₹58,300 (4.67%)Rejected-AOC | L2 | Rejected-AOC NOT THE LOWEST BIDDER | |
| 3 | L3₹13.9 L+₹1.4 L (11.5%)Rejected-AOC | L3 | Rejected-AOC NOT THE LOWEST BIDDER |
Tender Value
Refer Docs
EMD Value
₹29,000
Closing Date
25 May 2021, 12:00 pmClosed
CWE NAGPUR
Commander Works Engineers Bldg No. P-9, Sitabuldi Fort, Nagpur-440 001 Pin-900419, C/o 56 APO
SPECIAL REPAIRS TO ROAD IN KARIAPPA VIHAR (MAP LINE) OF CERTAIN UNIT UNDER GE KAMPTEE
2021_MES_430781_2
84707/E8
Open Tender
Civil Works - Roads
Item Rate
120 days
GE KAMPTEE
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE KAMPTEE
₹29,000
Yes
4 Jun 2021
4 May 2021
26 May 2021
4 May 2021
25 May 2021
12 May 2021
4 May 2021 - 8 May 2021
Amount
Repairs to pot holes any depth, not exceeding 1 sqm each including sweeping free from dust with mechanical equipment and mud or water, scoring sunken surfaces in roads, paths etc by using pressure air ,cutting around edges to at least 25mm in depth, making good by applying tack coat at 5 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm blinded with 0.09 Cum of stone chippings 6.3mm size and again well rammed (including supply of premixed bituminous macadam, binder and chippings), depth of pot holes exc 30mm complete all as specified and as directed.
Material & Labour for preparation of unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove loose dirt etc. complete all as specified and directed.
Material & Labour for applying evenly a priming/tack coat with bituminous primer using paving bitumen @ 10 kg per 10 Sqm on black top surface using mechanical sprayer complete all as specified and as directed
Material & Labour for premix bituminous macadam (consolidated thickness 75mm or less) with 4% binder content by weight of total mix (paving bitumen of grade VG-30), mixed in hot mixed plant and laid by using mechanical paver and rolled & compacted to required gradient and camber using 8 to 12 tonne power roller complete all as specified and as directed.
Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with mechanical equipments and clean the surface by using pressure air to remove all loose dirt etc., complete all as specified and as directed.
Material & Labour for applying evenly a priming/tack coat with bituminous primer of paving bitumen @ 5 kg per 10 Sqm on existing black top surfaces/on existing surface before laying of Asphaltic semi dense concrete by using mechanical sprayer, complete all as specified and as directed.
Material & Labour for premixed asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content (minimum) by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified and as directed. Note: The work should be executed by using hot mix plant and mechanical paver.
Material anf labour for painting Lines, Dashes, arrows, etc. By applting 2.5 mm thick Thermoplastic road marking compound of white/ Yellow of approved make and shade for road marking, not exceeding 10 cm width on bituminous roads/ pavements or on cement concrete surfaces using Hot processor plant, complete all as specified and as directed / as per manufacturer instructions.
Surface dressing not exceeding 15cm deep and getting out in soft/loose soil for road side berms to required gradient complete all as specified and as directed.
Material & Labour for Moorum/ red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and as directed.
Demolition of un-reinforced cement concrete of any description and in any position not otherwise specially provided, complete all as specified and as directed.
Material & Labour for 75 mm thick PCC 1 : 4 : 8 Type D-2 (using 40 mm graded stone aggregate), as in sub base of paths, hard standing and similar works, complete all as specified and as directed.
Material and labour for 60mm thick, rubber finish on top, M-35 grade, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006, with grey cement and pigment laid over 15 mm thick sand filling screed/ cushion, complete all as specified and directed. Note: Sand screed/ cushion will be measured and paid seperately.
Material and labour under cushion of paver blocks, complete all as specified and directed.
M&L for cement concrete 1 : 2 : 4 Type B-1 (using 20mm graded stone aggregate) as in side stops of paver block/ roof kerbs or mud stops, rounded or chamferred on edges etc., complete all as specified and as directed.
vidhamal&sons
M/s Rahul Traders
Bidder Name
M/s Rahul Traders
vidhamal&sons
Parasram Mulchandani
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .