SPECIAL REPAIR TO CERTAIN BR and EM WORKS IN OTM ACCN BLDG NO T2 and T3 AT TIBRI MIL STN UNDER GE GURDASPUR

Amount

Taking down chowkats or frames with shutter (without taking off shutters from chowkats / frame) not exc 1.50 Sqm each including cutting of holes for hold fast complete all as specified.

All as per Srl Item No 01.00 here-in-before but exc 1.50 Sqm and not exc 4.00 Sqm each.

Taking down shutter of any description size exc 1.00 Sqm and not exc 2.00 Sqm each complete all as specified.

Taking down shutter of any description size exc 1.00 Sqm and not exc 2.00 Sqm each & refixing in the same opening complete all as specified.

Demolition of cement concrete, in ground floor and paving, not exc 15 cm thick (below or above ground level), disposal of debris and rubish, unserviceable materials etc to a distance not exc 100m complete all as specified and directed.

Demolition of cement concrete, above ground level in any situation including sunken floor, disposal of debris and rubish, unserviceable materials etc to a distance not exc 100m complete all as specified and directed.

Demolition of brick work built in cement mortar, seperation, cleaning and stacking of serviceable bricks for reuse and removal of debris, rubbish to a distance exc 400 m but not exc 500m complete all as specified.

M&L for brick work with sub Class 'B' old size bricks, straight or curved on plan exceeding 6 Metre mean radius, built in cement mortar 1:4 complete all as specified.

All as per Srl Item No 08.00 here-in-before, but except bricks. Note:- Serviceable bricks obtained from dismantling of brick work shall be reused.

M&L for brick work with sub class 'B' old size bricks, straight or curved on plan to any radius, in half brick thick wall, built in cement mortar 1:4 complete all as specified.

Taking down cement plaster from wall's/ceiling including raking out joints hacking for key scrubbing down with water complete all as specified.

M&L for 15mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc complete all as specified.

M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick work and finishing the surface even and smooth (without using extra cement) etc complete all as specified.

M&L for 10 mm thick cement plaster in CM (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc complete all as specified.

M&L for 15mm thick cement plaster in CM 1:4 mixed with Water Proofing Compound (WPC) @ 3% by weight of cement on brick work or concrete surfaces, finishing the surface even and smooth (without using extra cement) etc complete all as specified. Note:- Cost of WPC shall be inclusive in unit rate quoted by the tenderer.

Supply only integral water proofing compound.

Dismantling brick tiles or terracing tile, single/double layer on roof including mud phuska any thickness and leepng plaster, seggregating, cleaning and stacking servicable tiles for reuse complete all as specified and directed.

M&L cement concrete 1:2:4, type B1, 40 mm thick, using 20mm graded stone aggregate with WPC by weight of cement as in roof padding, finishing even & fair complete all as specified.

M&L polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non-wove fabric (weight not less than 150 gm/sqm), laid on primed surface by forced application laid after preparation of surfaces by cleaning thoroughly to achieve a smooth surface, including application of a coat of bitumen primer @ 0.30 ltr per Sqm over a coat of hot blown bitumen of grade 85/25 @ 1.2 Kg per Sqm, overlaps of polymer shall be minimum 10 cm width/length wise complete all as specified and directed.

M&L for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed.

All as per Srl Item No. 20.00 here-in-before but except brick tiles. Note:- Old serviceable tiles shall be reused.

M&L for pressed steel frame with profile 105x60mm, made from 1.25mm thick MS black sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified.

M&L factory made, 35 mm thick flush shutter, soild core construction with plywood face panels, commercial type on both sides, ISI marked complete all as specified.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing given in Section 8 of SSR Part –II 2010.

M&L box type steel window, ERW hollow P-Section size 60 mm x 25 mm, double rebated ERW section of 1.25mm thick, comprising of glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one or two No openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast and guard bars etc as given below all as shown on drg No CEJZ/TD-06/07 incuding cutting holes and PCC 1:2:4, type B-1 in hold fast block, complete all as specified and directed as follows:- (a) Hold fast 150mm long of MS flat 12mm x 3mm - 4 Nos per Window (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf (c) MS tower bolt 150mm long - 02 Nos per leaf (d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf (e) Cleat 55mm long of hollow square 15mm, 0.63mm thick- 01 Nos per leaf (f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf (g) MS guard bar 10mm square bars @ 10cm c/c fixed horizontly Note:- Sheet glass, wire mesh and painting shall be measured and paid sperately.

M&L box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as stopper, cleat, pintal hinges, hold fast etc all as shown on drg No CEJZ/TD-06/07 dt 07.06.07 incuding cutting holes complete all as specified. Note: Sheet glass and painting shall be measured and paid Separately.

S&F GI wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or GI wire staples or wooden beads complete all as specified.

S&F 3mm thick ordinary sheet glass and glazing with oil putty or fixed with wooden beading, in squares not exc 0.50 Sqm in each panes complete all as specified.

All as per Srl Item No 28.00 here-in-before but figured glass pin head type & glazing with oil putty.

M&L mild steel framed works, as in door frame, gates of angle or other section with gusset plates, rails, braces etc, drilled for fixing of steel sheeting including drilling or fixing welding be prepared for hanging or sliding with and either hooks and hinges fixing, framed work as in grill, guard bars etc withends of bars riveted or forged into spikes, framed guard bars and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified.

S&F butt hinges 100mm size medium weight cold rolled mild steel, fixed with screws or welded to steel frame complete all as specified and directed

S&F 150mm size extruded aluminium anodized handle cast type complete all as specified.

S&F 150mm size Mild steel pressed handle oval type stove enamelled complete all as specified.

S&F 150 mm size aluminium anodized barrel tower bolt of extruded section complete all as specified.

S&F 150 mm size Mild steel barrel tower bolt of stove enamelled black with nut bolts complete all as specified.

S&F 300mm size, mild steel sliding door bolt, stove enamelled black, with sliding bolt not less than 12mm dia including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified.

M&L for preparation of newly plastered surfaces on walls and applying two coats of oil bound distemper over wall putty to achieve smooth surface complete all as specified.

All as per Srl Item No 37.00 here-in-before but on old decorated surfaces of walls.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified.

M&L for preparation of new plastered surfaces and applying three coats of white wash on wall complete all as specified.

M&L for preparation of old decorated surface of ceiling and applying two coat of white wash complete all as specified.

M&L for preparation of old decorated surface of walls and applying one coat of white wash complete all as specified.

M&L for preparation of old decorated surface of ceilings and applying one coat of white wash complete all as specified.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified.

M&L for preparation of old decorated surfaces of walls and applying one coat of cement base paint complete all as specified.

M&L for preparation of new steel surfaces of any description, over 10 centimetre width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surface over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surface over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 15mm complete all as specified. Note :- The quoted rates shall be include for necessary excavation and earth work, cutting/ chasing in wall / floor and making good in CM1:3 all as directed.

All as per Srl item No 49.00 here-in-before but bore of pipe 20mm.

S&F galvanized iron steel tubing medium grade 15mm bore with all fittings and fixed complete all as specified to walls, ceiling or laid in floor complete all as specified.

Taking down and rexing in the same position galvanized iron steel tubing medium grade 15mm bore with all fittings and fixed complete all as specified to walls, ceiling or laid in floor complete all as specified.

S&F galvanized iron steel tubing medium grade 20 mm bore with all fittings and fixed complete all as specified to walls, ceiling or laid in floor Complete all as specified.

Taking down and rexing in the same position galvanized iron steel tubing medium grade 20 mm bore with all fittings and fixed complete all as specified to walls, ceiling or laid in floor Complete all as specified.

S&F, in replacement, bib tap 15mm bore, standard of PTMT any colour high pressure screwed for iron pipe, (Minimum weight 90gms).complete all as specified.

S&F, in replacement, stop valve of PTMT, 15mm bore, any colour, high pressure screwed for iron pipe (Minimum weight 90gms) complete all as specified.

S&F, in replacement, stop valve of PTMT, 15mm bore, any colour,concealed type high pressure screwed for iron pipe (Minimum weight 90gms) complete all as specified.

S&F, in replacement, stop valve of PTMT, 20mm bore, any colour, high pressure screwed for iron pipe (Minimum weight 90gms) complete all as specified.

S&F, in replacement,angle stop valve of PTMT, 15mm bore, any colour, high pressure screwed for iron pipe (Minimum weight 90gms) complete all as specified.

S&F, in replacement, chromium plated grating, dome type, 100mm dia with waste hole, with or without hinge complete all as specified.

S&F, in replacement PVC connections 450mm long of 15mm size with PTMT nuts on both sides complete all as specified.

S&F in replacement Shower arm 15mm size,195mm long with bend of 45 degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and directed.

S&F, in replacement,20mm dia MS pipe PVC sheathed, decorative fancy type, curtain rod including brackets & a set of ABS finials complete all as specified.

Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L ceramic tiles, 7 to 8mm thick, coloured non skid, (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floor, set and jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including 15mm thick bedding layer in cement mortar 1:6 complete all as specified.

All as per Srl Item No 65.00 here-in-before but area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm & in CM 1:4.

M&L glazed cermic coloured tiles of size 300x200x7mm /350 x 250 x 7mm / 450 x 350 x 7 mm thick, on vertical surfaces of walls such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 10 mm thick bedding layer of cement mortar 1:4 complete all as specified.

M&L chequered, coloured, cement concrete tiles with grey cement and no pigment, size 30cm x30cmx25mm thick over and including 15mm thick cement screed in CM 1:4, set, jointed and pointed in neat cement slurry over and including 75mm thick PCC 1:4:8, type D-2 complete all as specified.

M&L for black zebra bhaislana marble 18-20mm thick, any type, table rubbed and polished, in cooking platform and like, set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of stone over and including 15mm thick cement screed bed in CM 1:4 including taking down existing stone slab, tiles etc complete all as specified.

S&F machine cut Kota stone slab flooring 20-25mm thick over cement screed bedding 15 mm thick in CM 1:6 jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and polishing (with bees wax polish) etc complete all as specified.

S&F machine cut Kota stone slab 20-25mm thick in risers of steps , skirting ,dado, and pillar laid , over cement screed bedding 15 mm thick in CM 1:6 jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and polishing (with bees wax polish) etc complete all as specified.

S&F in repair vitreous china squatting pan (Orissa Pattern), size 580 x 440 mm (white), with PVC (SWR) P or S trap, integral foot rest including connection to trap and flushing pipe, flushing cistern and bedding in and including PCC 1:7:12, type F-2 and taking down / dismantling old unserviceable WC complete all as specified and directed.

S&F in replacement PVC valveless, symphonic action type, flushing cistern, 10 Ltr capacity, white, low level with ball valve float, handle including bracket & 32mm dia pvc flush pipe PTMT couplings complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 550mm x 400mm including mild steel brackets, pillar tap 15mm size, chromium plated, PTMT waste coupling, PVC heavy duty waste pipe 32mm dia, including cutting for and pinning in ends of bracket complete all as specified.

S&F in repair vitreous china urinal, half stall type, size 420mm x 395mm x 635mm complete including providing and fixing bedding urinal against wall in cement mortor 1:2, pointing around urinal, including grating, union, disharge pipe, CP urinal spreader, bottle trap and CP waste coupling complete all as specified.

S&F rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), ISI marked, hoisted & fixed in position, capacity 500 litres including dismantling of old unservicable water tank complete all as specified and directed.

Taking down cast iron,PVC, SGSW eaves gutters and rain water pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified

S&F PVC (SWR) pipes single socketed, dia of pipe 110mm, in any length with rubber ring joints, fixed to wall with MS stack clamps of adequate size complete all as specified.

S&F PVC (SWR) pipes single socketed, dia of pipe 110mm, in any length with rubber ring joints, laid in trenches complete all as specified.

S&F PVC (SWR) pipes single socketed, dia of pipe 75mm, in any length with rubber ring joints, fixed to wall with MS stack clamps of adequate size complete all as specified.

S&F PVC (SWR) pipes single socketed, dia of pipe 75mm, in any length with rubber ring joints, laid in trenches complete all as specified.

S&F in replacement PVC (SWR) bend, any radius, for dia of pipe 110mm, with or without access door complete all as specified.

S&F in replacement PVC (SWR) bend, any radius, for dia of pipe 75mm, with or without access door complete all as specified.

S&F in replacement PVC (SWR) branch piece, junction (single/double), 'T' (single/ double), equal or unequal with access door, dia of pipe 110mm complete all as specified.

S&F in replacement PVC (SWR) vent cowl, dia of pipe 110mm complete all as specified.

S&F in replacement PVC(SWR) floor trap with grating 75 mm bore including jointing to waste pipe, fixed in and including PCC 1:2:4, type B1 alround complete all as specified.

M&L for 50 mm thick cement concrete 1:3:6, type C-2, (using 40mm graded crushed stone aggregate) as in plinth protection / path, finished even and fair without using extra cement complete all as speciified.

M&L reinforced cement concrete 1:2:4 type B1, using 20mm graded stone aggregate, as in shelves, cover slab etc including form work to soffits and sides of concrete including demolition of reinforced concrete complete all as specified.

M&L for use and waste of form work to Chullah hoods, chajjas, weather shades, corbels, water troughs and similar items including edges rough finished surfaces of concrete complete all as specified and directed.

M&L for repairing to RCC projection, chhajjas, roof facia, ceiling by scrapping, cutting, derusting, and cleaning exposed reinforcement of damaged loose RCC surfaces and applying neat cement slurry @ 3Kg/Sqm and filling the surface cement plaster 1:3 or cement concrete 1:2:4 type B0, in layers as required, finished even and smooth and including application of finishes to match with existing (cement paint/distemper etc), at any height and in any situation including necessary form work complete all as specified.

M&L for roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust inclusive brushing neat cement slurry with 3.0 Kg of cement per sq. metre complete all as specified and as directed.

M&L for Cement concrete 1:7:12 type F-2 (using 40mm graded brick aggregates) as in foundations, filling and mass concrete complete all as specified and directed

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in sunken portion complete all as specified and directed

M&L cement concrete 1:2:4 type B1, using 20mm graded stone aggregate, as in blocks of hold fasts, back fill of presssed steel chowkats, roof kerb, mud stop, egdes rounded complete all as specified.

M&L TMT bars 8 to 10 mm dia and over, cut to length, bent to shape required, including cranking bending spirally for hooping for column, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Excavation in trenches not exceeding 1.5m in width and not exceeding 1.5m deep, in soft/loose soil for foundation, laying of pipes, cables, wells, cesspits, manhole, pier holes & getting out complete all as specified and directed.

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

Removing excavated material to distance not exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

E/M-Portion:-Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing complete all as specified and directed.

M&L for point wiring for one light/fan/bell/buzzer point controlled by one 1-way switch complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked, in and including PVC concealed conduit ISI marked of size not less then 20 mm dia and 1.5 mm wall thickness and PVC conduit fittings such as tees, bends, elbow, reducers, including cutting, chasing, making good in CM 1:3 and 1.5 Sq mm (nominal area) FR, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly with thimble, including pressed steel powder coated MS sunken box of suitable size, covered with & including 3 mm thick bakelite, laminated hylem sheet top cover and making good surface as original by plastering and white / colour wash / distemper etc complete all as specified. Note: The cost of MS sunken box and bakelite sheet is included in the unit quoted rate.

All as per Srl Item No 102.00 here-in- before but for one socket outlet point 5 amps on the same board.

All as per Srl Item No 102.00 here-in-before but for one socket outet point 5 amps on independent board.

All as per Srl Item No 102.00 here-in-before but with 2.5 Sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for power point on independent board.

S&F switch piano flush type 5 Amp AC single pole one way, 230 volts, complete all as specified.

S&F socket outlet 5 Amps, 2/3 pin combined, 230 volts, AC complete all as specified.

S&F switch piano flush type 15 Amps, 230 volts, AC complete all as specified.

S&F socket 15 Amps, 2/3 pin combined, 230 volts, AC complete all as specified.

S&F ceiling rose surface bakelite 65 x 50mm three terminals complete all as specified and directed.

S&F lamp holder insulated body with back plate batten / angle type including LED bulb 9 watt 230 volts cool day light 6500 K complete all as specified and directed.

S&F in replacement MCB C Curve type, 10 KA, 6 to 32 Amp, Single Pole with over load and short circuit protection complete all as specified and directed.

S&F in replacement MCB B Curve type, 10 KA, 6 to 32 Amp, Single Pole with over load and short circuit protection complete all as specified and directed.

S&F in replacement MCB C Curve type, 10 KA, 6 to 32 Amp, Single Pole with neutral, with over load and short circuit protection complete all as specified and directed.

Supplying and fixing in replacement of distribution boards, double door factory made,TPN,4 way vertical type 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB (100 Amps, 16 KA, TP, 415 volts, 50 HZ= 01 No) and MCBs SPN 63 Amp -02 Nos ,MCB SP - 32 Amp- 08 Nos out going circuits comprising of 3 phase 4 wire of suitable rating complete all as specified and directed.

S&F, in replacement, security light IP 66 with high power LED, 45 watt, energy saving, environment friendly, including bracket made out of GI pipe medium grade 40 mm bore 1.2 mtr long, made to shape, fixed with MS clamps of MS flat 40x6mm, nuts, bolts and washer and making connection with and provision of electric cable complete all as specified and directed.

S&F in replacement sheet metal enclosures MCB DB, single pole and neutral, double door, 8 ways 240 V having 200 Amp rated bus bar with blanking plates wherever required complete all as specified and directed.

S&F surface mounting universal batten housing made of powder coated CRCA sheet fixed on and including PVC square blocks 2 Nos upto 1x18/20 W LED tube rod single sided including taking down of old unservicable fitting complete all as specified and directed.

S&F LED tube light 20 W (single sided connection) ultra bright, polycarbonate tube light with very high efficacy, suitable for fitting into existing / new tube light batten fitting complete all as specified and directed. Note:- The contractor shall submit LM-79 & LM-80 report from manufacturer to Engr-in-Charge before incorporating the items in the work.

Taking down ceiling/exhaust fan and removing, deposited to store yard of AGE E/M for safe custody and refixing in position at the time of completion of work all as directed.

S&F, in replacement, fan regulator, 5 step type 100 watt, heavy duty, 230 volts, AC complete all as specified.

M&L for sub main wiring consisting two single core PVC insulated cable with stranded copper conductor, size 6 Sqmm, one single core copper earth wire 6 Sqmm, drawn in and including concealed non metalic PVC conduit, 1.5 mm thick, 25 mm dia (external) inclusive of MS junction / terminal boxes and all fittings and accessories including taking down old unservicable sub main wiring complete all as specified. Note:- Two run of cable 6 Sqmm and one run of 6 Sqmm earth wire including PVC conduit shall be measured as 'One Unit'.

Supply, laying and testing in replacement XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty with aluminium conductor, 1100 volts grade, 25 Sqmm 4 core, including thimbles / lugs / cable gland etc, laid in duct / trench / along pole etc complete all as specified.

M&L for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as specified and directed. Note :-Punned down thickness of sand shall be considered for measurement)

Supply and lay, bricks, common burnt, sub class 'B', old size, for protection of cable, laid in trenches over cable, length of brick perpendicular to directon of cable, complete all as specified and directed.

S&F GI pipe 50mm dia light grade for cable protection, fixed to poles, under road, along wall inculding necessary MS clamps complete all as specified and directed.

M&L for earthing complete with GI earth plate electrode 600mmx600mm, 6mm thick, burried in ground vertically to a depth not less than 2.25 meters below ground level with top edge of the earth plate to a depth not lesss than 1.5 meter below the ground level, earth plate surrounded by 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron earth lead wire of dia 4mm as earth conductor/lead by means of GI nuts, bolts and washers etc all as shown in Electrical Plate No. 5 of SSR Part-I connected to earthing test point including testing on completion complete all as specified. Note:- (i) The cost of excavation & earth work shall be included in the quoted rates. (ii) Earth lead beyond 7.5 m from electrode to earth terminal shall be measured separately (iii) On testing, after completion, if desired earth resistance is not obtained, the earthing will be redone at no extra cost and quoted rates shall be inclusive of this aspect.

JOGRAJ CONSTRUCTION COMPANY

Harbhajan electric co

S S CONSTRUCTION

P S BUILDERS

buta singh and sons

D.RAJ And CO.