Work of Shifting 11 KV and 33 KV Electric Poles obstructing Remodeling/Widening for Geometric Improvement and under Ground the related Electric Lines under the Jurisdiction of Electricity Urban Distribution Division-Katghar, MBD (In Deposit Scheme).

Amount

Safe Carriage of following material from store Centre Majhola, Moradabad to work site including its loading and unloading.

11 Mts. Long ST Poles.

11 KV XLPE Cable 3X185 SQ MM .

33 KV XLPE Cable 3X400 SQ MM .(DOUBLE CKT)

Straight through joint boxes suitable for HT XLPE Cable of 300Sq.mm/3C for 11KV

Straight through joint boxes suitable for HT XLPE Cable of 400Sq.mm/3C for 33KV

Cable LT XLPE 3.5x150 Sqmm.

Heat Shrinkable O/D type termination kit for 11 XLPE Cable 3X120 sq.mm.

Heat Shrinkable O/D type termination kit for 33 XLPE Cable 3X400 sq.mm.

11 KV Polymer Disc insulator B&S type 45KN.

Disc Fitting B&S type 45KN

HDPE Pipe for cable laying (Pipe to be laid by HDD Method)

11 KV GI Top Channel (100x50x2400) mm with clamp, bolt nuts and washers

11 KV DROPPER CHANNEL 100X50X2000 mm.

33KV Top channel

33 KV Dropper channel

11KV Stay set (G.I Stay Road 16x1800mm, Stay 7/8 SWG wire, Stay clamp with bolt, nut & washer with concerte) asper TS

33KV Stay set (G.I Stay Road 20x2100mm. , Stay wire 7/8 wire SWG , Stay clamp

MS Earthing Rod of 20x2500 mm with 25x3mm GI Strip

Providing and fixing of Danger board on 11 KV Line poles by providing MS clamps nut & bolts.

Providing and fixing of number plate on 11 KV Line poles by providing MS clamps nut & bolts.

Filling and Fixing of Holding clamp with nuts and bolts.

Filling anf Fixing of Heat Shrinkable O/D type termination kit for 11 XLPE Cable 3X120 sq.mm.

Filling anf Fixing of Heat Shrinkable O/D type termination kit for 33 XLPE Cable 3X400 sq.mm.

Digging of pits, & Erection of 11 mtr long ST Double Pole including fixing with all required accessories by providing M.S clapms, Nut & Bolts.

Digging of cable Trench for laying HDPE PIPE in pakka road by machine.

Providing and installtion of on stone route marker ( yellow colour)

Drilling & Laying of HDPE PIPE for underground Cable using HDD Method

Laying of HT underground cable using HDD Method with in HDPE Pipe.

Grouting of poles in cc 1:4:8 coment, sand & Briek Ballost 300 sq.mm. plinth above the ground level with muffing includes back filling and proper ramming.

Mounting of cable on DP structure ( Including loop and riser)

Dismantling of out damaged HT Poles and transportation up to store

Dismantling of existing overhead line and tranportation of material to nearest PVVNL Store

HDPE Pipe 160mm for cable riser

cable carriage charge from store to work site

Cable Route Marker

Allu. Lugs for incoming and outgoing cables of vaious sizes

Cosmic Enterprises (BID ID -5310368)

AAYANSH ELECTRICAL SOLUTIONS (BID ID -5310209)