Improvements to Road from Improvements to Road-Andur (NH-50) to Taluka Border (Malchapur), Improvements to Road-Madargi to Badlapur, Improvements to Road-SH-15 to Bellura, Improvements to Road-Muttangi to Mustariwadi, (Bidar South Constituency), Bidar District.Package No KP-06-07

Improvements to Road from Improvements to Road-Andur (NH-50) to Taluka Border (Malchapur), Improvements to Road-Madargi to Badlapur, Improvements to Road-SH-15 to Bellura, Improvements to Road-Muttangi to Mustariwadi, (Bidar South Constituency), Bidar District.Package No KP-06-07

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead with all lead and lift i...

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

Construction of unlined surface drains of average cross sectional area 0.40sqm in soil to specified lines, graded, levels and dimensions, excavated material to be used in embankment as per Technical s...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction with all lead and ...

Construction of Embankment by excavating the available approved Gravel or Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadi...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

Construction of Granular Sub-Base by Mix in Place Method by providing well graded Gravel, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavato...

Construction of Water Bound Macadam Sub-base/base, by using available scarified aggregate by stacking the scarified material, hand breaking into coarse aggregate of specific sizes to water bound m...

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90 kg per m2 using mecha...

Providing and applying tack coat with RS1 Bituminous Emulsionusing emulsion pressure distributor at the rate of 0.25 kg or m2 on Granular Surface. with all lead and lift including other incidental cha...

Providing, laying and rolling of open - graded premix surfacingof 20 mm thickness composed of 13.2 mm to 5.6 mm aggregateseither using viscosity grade bitumen VG-30 to required line, gradeand level to...

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using TypeA and B seal coats with bituminous binder VG-30- Case - II : Type ...

Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc (i) 5th kilometre stone (precast) with all lead and lif...

Reinforced cement concrete M15grade kilometre stoneof standard design as per IRC:8-1980, fixing in positionincluding painting and printing etc (Ordinary kilometer stone (precast)) with all lead and li...

Reinforced cement concrete M15grade kilometre stoneof standard design as per IRC:8-1980, fixing in positionincluding painting and printing etc (200 m stone (precast)) with all lead and lift including ...

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. i) The board will be a composite unit consisting of three plates of Aluminium Composite M...

Retro-Reflectorised Traffic SignsProviding and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2012 made of Class C Type XI retro reflective sheeting fixed over...

Providing and fixing of typical 'Citizen Information Board A"as per specifications and drawing. Two ACP Sheet of 4mmthick having minimum 0.25mm thick aluminum skin bothsides and fixed over a back supp...

Providing and fixing of typical Maintenance informationboard as per specifications and drawing. ACP Sheet of 3mm thick having minimum 0.25mm thick aluminum skinboth sides and fixed over a back support...

Providing and fixing of typical Logo board as per specifications and drawing. Two ACP Sheet of 3mm thick, top and Bottom plate duly welded/bolted with MS Square angle 25mm x25mmx 5mm size on back and ...

Direction and Place Identification Signs upto 0.9 m2 Size Board.Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67:2012 made of high intensity grade sheet...

Providing Speed Breakers/Raised pedestrian crossings in Trapezoidal section with 2.5 m Top width and transition length of 0.8 m length and height of 0.1 m as per IRC 99:2018 using Bituminous Macadam (...

Road Markers/Road Stud with Lens Reflector--Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installe...

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous SurfaceProviding and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorisi...

Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 m...

Reinforced cement concrete M15 grade boundary pillars ofstandard design as per IRC:25, fixed in position includingfinishing and lettering but excluding painting with all lead and lift including other ...

Dismantling of StructuresDismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and...

Removing all type of Hume Pipes and Stacking including Earthwork and Dismantling of Masonry Works. 900 MM Dia NP2 Pipes with all lead and lift including other incidental charges wherever necessary for...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relev...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. Th...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. Th...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure worksof bridges upto 3.50 m height. The granite or t...

Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcementincluding cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping or welding joints, ...

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification Back filling behind abutment, wing wall and return wall complete includ...

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification.Boulder Laid Dry...

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toeof embankment complete as per drawing and Technical specifications with all lead...

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavatio...

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material insingle row including fixing collar with cement mortar 1:2but excluding excavation, p...

Routine Maintenance after completion of construction works Flexible Pavement for 1st Year

Routine Maintenance after completion of construction works Flexible Pavement for 2nd Year

Routine Maintenance after completion of construction works Flexible Pavement for 3rd Year

Routine Maintenance after completion of construction works Flexible Pavement for 4th Year

Routine Maintenance after completion of construction works Flexible Pavement for 5th Year

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom with all le...

Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (Type-B) aggregates using VG-30 Bitumen (with addition of processed waste plast...