Set of Arm having size:550mm & Blade having size:500mm along with suitable Nut & Bolt for Electrical Motor Wiper Drive Unit of BT & Medha EMU Rake

Special Eligibility Criteria

1. 1

   Railways reserve the right to procure the bulk / full quantity from Only OEM or their authorized dealer as per clause no.16.5 of Eastern Railways Stores General Tender Conditions. Authorised dealer must upload valid tender specific authorisation of OEM, otherwise offer is liable to be rejected,

   Document optionalConfirmation required
2. 2

   In terms of Railway Board letter no. 2015/RS(G)/779/5(Vol.III) dated 22.06.2020 and in keeping with the Public Procurement (Preference to Make in India) Order 2017 as amended time to time, it has been found that there is sufficient local capacity and competition in supply of the tendered item of required quality and therefore, public procurement of this tendered item is restricted to Class-I local suppliers only (Class-I local supplier means a supplier having local content equal to or more than 50 Percent).The vendors who do not qualify to be Class-I local suppliers should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a Class-I local supplier for the tendered item, participates in the tender, it does so at its own risk and cost and Railway shall not be liable for any loss or damage caused to the vendors.

   Confirmation required

Check List

1. 1

   [1.1] The bidder agrees to supply the tendered stores at the rates quoted by him in accordance with the IRS Conditions of Contract and [or] special Conditions and [or] other Conditions specified/attached with the tender. [1.2] The bidder should go through the tender Documents consisting of instruction to Tenderers, General Tender Conditions and Special conditions of Tender, and agree and confirm to abide by the instructions to Tenderers, General Tender conditions, IRS Conditions of contract and the Special Conditions of Tender. [1.3] The bidder should submit/upload the performance statement supported by copies by Purchase Orders, Receipt Notes, and Inspection Certificates as the case may be. [1.4] The offer should be kept valid for 90 days. [1.5] The guarantee/warranty as per specification / DRG., and, in case specification / DRG. does not contain GC/WC, then do you agree GC/WC, then the same will be as per IRS conditions of contract. [1.6] In case of Authorized Dealer, please uploaded Authorization Certificate along with offer. [1.7] Please mention your approved factory address along with proof for the purpose of Inspection. [1.8] Have you attached signed Bid securing declaration for availing exemption from submission of EMD if applicable ?

Commercial-Compliance

1. 1

   Makers name/brand must be mentioned with complete address and brand.

   Confirmation required
2. 2

   Approved factory/manufacturers address must be mentioned along with proof for the purpose of deciding the place of Inspection.

   Confirmation required
3. 3

   GST:(A) It shall be the responsibility of the Bidders to quote correct HSN Number and corresponding GST Rate, (B) The offer shall be evaluated based on the GST rate quoted by each bidder and same will be used for determining the inter-se- ranking. While submitting offer, it shall be the responsibility of the Bidder to ensure that they quote correct GST rate and HSN number, (C) Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate if quoted by the bidder, (D) Wherever the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase Order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the purchase order or billed, (E) Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax billed as per invoice to match the all inclusive price as mentioned in the purchase order, (F) Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.

   Confirmation required
4. 4

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

1. 1

   Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted. Firm will have to submit quotation with a validity for a minimum period of 90 [ninety] days otherwise their offer will be summarily rejected.

2. 2

   No deviation in Inspection clause is accepted

3. 3

   Vendors who are not exempted from paying the EMD must submit the EMD along with their BID as per the tender document failing which their offer will be summarily rejected without any back reference