MAINTENANCE AND REPAIR WKS AT VARIOUS BLDGS INCL JOINERY AND FLOORING AND PLASTERING AND SANITARY FITTINGS UNDER AOR OF AGE BR I UNDER GE PARTAPUR

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving n. exc. 15cm thick (below or above ground level) complete all as specified and as directed.

M & L PCC 1:2:4 type B-2, 100 mm thick using 40 mm graded stone aggregate as in floor and pavings.

M & L PCC 1:2:4 type B-1, 40 mm thick using 20 mm graded stone aggregate as in flooring surface finished even & smooth without using extra cement.

M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick as in plinth protection/pavment and the like, finish the surfaces even and fair without using extra cement all as directed and specified

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate, 50mm thick as in sub base cemplete all as directed and specified

M&L Chequered cement concrete tiles 300x300mm by 25 mm thick, with grey cement and no pigments incl over 20 mm thick screed bed in CM 1:6, jointed and pointed in neat cement slurry in floors.

M & L machine precast colour concrete decorative interlocking paver block of any shape and size confirming to IS15658-2006 of 60mm thickness M-35 Gde complete all as specified.

M & L 25 mm sand filling under floors including watering and consolidation.

Dismantling floor hearth or wall tiling including cement mortor bedding but not backing, removing serviceable tiles to stores and rubbish off premises, complete all as specified and as directed.

M&L, Rendering 10 mm thick cement plaster in CM 1:4 as a backing coat for laying wall tiles complete all as specified and directed by Engr-in-charge.

M&L, glazed ceramic coloured tiles in vertical surface 300 X 200 X 7 mm thick set and jointed in neat cement slurry and pointed in white or couloured cement to match, complete all as specified and directed by Engr-in-charge.

M&L 15 mm thick screed bed or bedding layer of cement mortar for laying floor finish in CM 1:6

M&L non skid coloured ceramic tile 7 to 8 mm thick (square/rectangular) are of each tile exc 0.11 Sqm but not exc 0.18Sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L vetrified ceramic tiles 10mm thick (square/rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement to match incl over 20mm thick CM 1:6 screed bad for laying floor all as specified and directed.

Ditto as Item Srl No 14 above but on vertical surface as in dados/skirting over 15mm thick backing coat in CM 1:4 all as specified and directed.

Supply and fixing in repair laminated wooden flooring in size 1227mm x 197mm x 8mm thick, including skirting, floor breakers etc complete all as sper manufacturers instruction with a layer of foam backing complete all as specified and directed

Dismantling wall and ceilling board (fibre, pulp, insulation etc) or insulation board/slabs/blanket any thickness including cover fillets.

M&L 6 mm thick veneered decorative plywood, grade 1 ( with BWR resin) with only one side decorative face veneers fixed with nails as in wall panelling, complete all as specified and directed by Engr-in-charge..

M&L 6 mm thick veneered decorative plywood, grade 1 ( with BWR resin) with only one side decorative face veneers fixed with nails as in ceiling works, complete all as specified and directed by Engr-in-charge..

M&L, French polishing on surfaces of any discription, width or girth incl cleaning and preparing the surface incl a coat of wood filler on new works with two coats, complete all as specified and directed by Engr-in-charge.

M&L Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in Ceiling complete all as specified. (Including dismantling and refixing of same electic wiring and points)

M&L Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in wall complete all as specified. (Including dismantling and refixing of same electic wiring and points)

Dismantling timber framed in fillets,rails, posts rafters,purlines, etc under 40 sq cm in section, complete all as specified and directed by Engr-in-charge.

M&L second class softwood plain fillets,rectangular in section, clean swan, secured with nails exc 13 and n.exc 25, complete all as specified and directed by Engr-in-charge.

M&L second class softwood plain fillets,rectangular in section, clean swan, secured with nails exc 3 and n.exc 6, complete all as specified and directed by Engr-in-charge.

Demolition of brick work/ block masonry work built in cement mortar complete all as specified

Material & Labour for precast cement concrete block masonry 1:3:6 type C-I with solid block exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

Material & Labour for precast cement concrete block masonry 1:3:6 type C-I with solid block 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

Taking down cement plaster on brick or concrete stone walls etc incl racking out joints hacking for key scrubbing down with water etc.

M&L for 15mm thick rendering on fair faces block masonry walls in cm (1:6) with finished the surface fair and even.

M&L for 15mm thick cement plastering on fair faces block masonry walls in cm (1:4) with finished the surface fair and even.

M&L preparation of new plastered surfaces of walls. Priming plastered and other surfaces with alkali resistant priming paint and applying two coat of cement base paint complete all as specified.

Two coats of oil bond distemper over a coat of primer on walls, pillasters on newly plastered surface complete all as specified

Material & labour for preparation of new plastered surfaces & applying three coat of white wash on walls.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone concrete or brick surround glazed with putty or fixed with bead complete.

M&L 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 sqm in each pane complete all as specified and directed.

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each.

Taking down chowkhat or frames of door/ window / ventilators with shutter(Without taking off shutter from the frame) n.exc 1.50 m each.

Taking down shutters of any description exc 1.00 m and n.exc 2.00 Sqm.

Re-fixing shutters of any description exc 1.00 m and n.exc 2.00 Sqm.

S&F plain, solid, straight chowkats of second class hard wood and frames, wrough, framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints as specified.

S&F, 35 mm thick 2nd class softwood glazed and skeleton shutters, open reabeted and prepare to received glass fitted with cut and mitred beads for secuing glass for ventilators.

S&F, 25 mm thick 2nd class softwood glazed and skeleton shutters, open reabeted and prepare to received glass fitted with cut and mitred beads for secuing glass for ventilators.

S&F 35mm teak face Flush shutter laminated particle board solid core construction with block board core and plywood face panels commercial type on both side complete all as specified.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/galvanized wire staples all as specified.

All as per above item in before but fixed in repair.

Mild steel springs for doors, 150 mm, ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F 100 mm butt hinges, meium weight cold rolled mild steel.

S&F 75 mm butt hinges, meium weight cold rolled mild steel.

S&F Aluminium handles cast type anodised of size 150mm long ISI marked complete.

S&F aluminium anodised barrel tower bolt 200 mm, extruded section.

S& F aluminium anodised sliding door bolts with hasp and stapple extruded section or cast aluminium alloy 250 mm long.

S&F Floor spring double action hydrulically regulated made up of minimum 1.25mm thick aluminium alloy sheet and foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty incl taking down old ones complete all as specified and directed.

S&F aluminium Door closer hydraulically regulated,extruded section body designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed in repairs complete all as specified

S&F 2nd class hard wood as small fittings not exceeding 200 cu.cm. each such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads.

S&F Glazing with sheet, 3mm thick, ordinary quality and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane.

S&F Glazing with figured glass(Frosted), pin head type, 3mm thick, and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawings.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing.

S&F curtain rail ,20 mm dia anodised aluminium alloy ,cromium plated fixed with braket, incl taking down of old curtain rods, all as directed.

M&L for preparation of new untreated wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer.

M&L for one coat of synthetic enamel paint to old wooden surface over 10 cm width or girth incl preparartion of surfaces.

osho traders

M/S SHAMSHER ALI SUFI

M/S MA CONSTRUCTION Co

M/S GLOBAL ENGINEERS

M/S LIBE & CO

H R CONSTRUCTION

HONY CAPT RIGZIN SAMPHEL