ESWCA-23/2024-25

Amount

Safe carriage,loading,unloading,dragging & stacking of following material from store center to contractors dump site to pit site asper requirement :-

33 KV Bus Type Isolator.

ACSR Dog conductor

11KV incoming with CT ratio 600/300/5A, 350 MVA

11KV Outgoing with CT ratio 200/100/5A, 350 MVA

33 KV Post Insulator.

33 KV Lightening Arrestors

90 Lbs. Rail pieces for T/F

33 KV Single Transformer Control Panel.

33 KV VCB 800A, 750 MVA

33 KV CT, 200/100/1-1A

11 KV 3 Core XLPE Cable Al. 3x300 Sq.mm

11 KV 3 Core XLPE Cable Al. 3x185 Sq. mm

11 KV Cable Jointing kit. Heat 3x300 Sq. mm Indoor

11 KV Cable Jointing kit. Heat 3x300 Sq. mm Outdoor

11 KV Cable Jointing kit. Heat 3x185 Sq. mm Indoor

11 KV Cable Jointing kit. Heat 3x185 Sq. mm Outdoor

STP Pole 11 Mtr Long Sp-55

11 KV Fuse Set

11 K.V. TPMO (AS PER SPECIFICATION)

Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.

11 KV Polymeric Disc Insulators with fitting (45KN)

11 KV Polymeric Pin Insulators with pin

Stay complete (stay rod 16x180mm, stay Wire 5Kg Stay clamp, bolt & nut with grouting)

Supply & providing of following Material & including Miscellaneous line items requried of line makeing (Electrical Material As Per RESPO Norms,Drawing.) :-

Structure for 33 KV Bus Type Isolator.

Structure for 33 KV Post Insulator

Structure for 33 KV Lighting Arrestors

Plinth & Foundation of T/F Material (Cement, Morang, Bracks & Stone)

Indoor Equipment Earthing Material (Cement, Morang, Bracks & Stone)

33 KV CT Structure

Plinth & foundation of VCB Material (Cement, Morang, Bracks & Stone)

Control Cable 4x2.5 Sq. mm.Cu. Xlpe ARM.

Control Cable 2x2.5 Sq. mm.Cu. Xlpe ARM.

Pipe Earthing Material

Chemical Earthing Material

Sundry Stores

E Bracket with bolts & nuts

PG Clamps

Stone Pad 300x300x75 mm

MS Channel cross arms 100x50x2240mm (Top Channel

M.S. channel 125x65x2028 mm long (dropper for fuse set)

Alluminium paint. (LS)

Red oxide paint (LS)

Holding clamps for top channel tpmo & fuse set etc. with n&b

Danger Board And Clamps With Bolts & Nuts.

Number Plate Clamps With Bolts & Nuts.

G.I. PIPE 6'' DIA.

Barbed Wire GI

Fabrication,Erection,installation,Fixing,Laying,saging,completion, testing and commissing of 33kv line Works.(As Per RESPO Norms &Drw.) :- exp. pit digging and erection, Grouting of s/s structur & building of plinth and .tensinoning of conductor,fitting of armour rods and binding of conductors.Jointing ,cable termination and connections,etc

Tarmination of connction of with fitting 33/11 KV 5 mva power T/f Sides

Fabrication erection, fixing and Installation of Isolator Structure with sundry Items & Earth link switch and all supporting accesssories grouting of 33 KV Bus Type Isolator Structure and including earth link and connected to strip Earthing to end two sides support of earthmat

Laying,saging ACSR Dog conductor with fitting all accessories

11KV incoming VCB safe Installation on the foundation and connction of control wire with fitting (CT ratio 600/300/5A, 350 MVA ) and including earthing work

11KV Outgoing VCB safe Installation on the foundation and connction of control wire with fitting( CT ratio 200/100/5A, 350 MVA) and including earthing work

Fabrication erection, fixing and Installation of Post Insulator Structure with sundry Items & Earth link switch and all supporting accesssories grouting of 33 KV Post Insulator Structure and including earth link and connected to strip Earthing to end two sides support of earthmat

Fabrication erection, fixing and Installation of Lighting Arrestor Structure with sundry Items & Earth link switch and all supporting accesssories grouting of 33 KV Lighting Arrestor Structure and including earth link and connected to strip Earthing to end two sides support of earthmat

Fixing 90 Lbs. Rail pieces on the plinth

33KV Singal Control Panel safe Installation and connction to control wire to CT/PT junction box and connected to strip earthing two end side to the earthmat.

33 KV VCB 800A, 750 MVA safe Installation on the foundation and connction to VCB junction box with proper fitting and including earthing work

Fabrication erection, fixing and making of CT structure & CT Junction box and all accesssories including earthing work with supporting strip connected two end side of earthmat

Laying,termination and connections of 11 KV 3 Core XLPE Cable Al. 3x300 Sq. mm amd ercted L-type stand for above cable & nutral support

Laying,termination and connections of 11 KV 3 Core XLPE Cable Al. 3x185 Sq. mm

Fixing ,prepare and Making Indoor type 11 KV cable Jointing kit 3x300 Sq. mm

Fixing ,prepare and Making Outdoor type 11 KV cable Jointing kit 3x300 Sq.mm

Fixing ,prepare and Making 11 KV cable Indoor type Jointing kit 3x185 Sq.mm

Fixing ,prepare and Making 11 KV cable Outdoor type Jointing kit 3x185 Sq.mm

Erecting of STP Pole Double Pole Structure with all accesssories

Fixing & Fitting 11 KV Fuse Set

Fixing & Fitting 11 K.V. TPMO (AS PER SPECIFICATION)

Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.

Fixing & Fitting 11 KV Polymeric Disc Insulators with fitting (45KN)

Fixing & Fitting 11 KV Polymeric Pin Insulators with pin

Stay complete (stay rod 16x180mm, stay Wire 5Kg Stay clamp, bolt & nut with grouting)

Building/making Plinth & Foundation of T/F

Earthing of Equipment

Fabrication erection, fixing all supporting accesssories and grouting of 33 KV CT Structure (33KV/110V) with Sundry items and including earthing work

Building/making Plinth & foundation of VCB

Making/building and dressing of 11 KV Cable Trench 450mm wide,900mm deep shoud be excavated 5cm layer of sand shall be place at the bottom Including cost of sand & bricks

Laying,termination and connections of Control Cable 4x2.5 Sq. mm.Cu. Xlpe

Laying,termination and connections of Control Cable 2x2.5 Sq. mm.Cu. Xlpe

Neutral & Body earthing work of power transformer (water level) Making to funel ahead to 1.5 mtr. T/F and connected qubik box (300x300x300) qmm to copper strip neutral G.I. Strip making delta.

Chemical earthing of T/F body and L-Type stand

Painting work of errected Structures

Grouting of stay

Concreting of poles (0.268 Cu.m. each) with (Cement, Morang, Bracks & Stone)

Barbed Wire GI

Note :- 1- The branch strip to the main mat 1.5-2 mtr interval Note :- 2- 2.5 mtr. Long 40 mtr dia galavnized pipe shall be driven to the full length so that top at least 500 mm below the graund level and weild to the strip with ground mat whenever main ground strip cross each other they will be weilded cross point all non current carrying and melting equipments are to be grounded at two distinck point by connecting them to the main mat.

SHARMA ELECTRIC WORKS (BID ID -5110245)