Up-gradation of SHC into AB-HWC at village Kalsora, Labkari, Nandi, Dhanora jagir, Garhi Birbal and Kalri Jagir Distt. Karnal (Providing Special repair to EI).

Amount

Supply and erection of PVC copper insulated and sheathed 2-core circular flexible wire. Size 1.50 sqmm ( 48 / 0.20mm). HRS No. 31.9 (i) d

Size 2.50 sqmm ( 80 / 0.20mm). HRS No. 31.9 (i) e

Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections . Double pole switch 32 amp 240 Volts. HRS No. 31.12 (a) (ii) Cat-B

Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. S.P.N. enclosure for single pole MCB 20 amp. HRS No. 31.15 (ii)

Blanking sheet . Supply and erection of blanking sheet in existing distribution board. HRS No. 31.16 (i)

Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. Miniature circuit breakers of 9 KA breaking capacity. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. HRS No. 31.17a) (ii)

SPN MCB of 9 KA breaking capacity 6 amp. To 32 amp. HRS No. 31.17(a) (ii)

Supply and erection of Fittings and Accessories. Plain pendent complete with bakelite lamp holder and 0.75 sqmm. (24 / 0.20mm) PVC sheathed copper flexible wire but without lamp and Shade. HRS No. 31.18 (i)

Call bell 220 / 230 volts A.C. bakelite with double coil. HRS No. 31.18 (vii)

Electric buzzer 220 / 230 volts A.C. bakelite with double coil. HRS No. 31.18 (viii)

Bell push with 4 metres 2-core , 0.50 sqmm (16 / 0.20 mm).PVC flexible wire. HRS No. 31.18 (ix) (a)

Switch 5 amp. On existing sheet. HRS No. 31.18 (xii)

Wall socket 5 amp. On existing sheet. HRS No. 31.18 (xiii)

15 amp. Switch on existing sheet . HRS No. 31.18 (xiv)

3 pin 15 amp. Multi socket on existing sheet. HRS No. 31.18 (xv)

5 mm thick . HRS No. 31.18 (xviii) (a)

Erection only of 1x40 watts or 2x40 watts 1220 mm long /1x20 watts or 2x20watts 610 mm long fluorescent tube with fittings by means of 2 Nos. , 20 mm diameter 1.60 mm thickness conduit pipe with spring loaded brass flanges at both ends including 0.75 sqmm (24/0.20 mm) PVC copper flexible cable for connecting the tube to the adjascent light point including cost of conduit pipe flanges . PVC flxible cable and petty material required for the same ( Upto 1/2 metre length of pipe ). HRS No. 31.18 (xxii)

Erection and carriage of fans.. Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work. HRS No. 31.20 (i)

Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work. HRS No. 31.20 (iii)

Making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section 40 mm x 25 mm thick. HRS No. 31.20 (v)

Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep. HRS No. 31.20 (vi)

Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed. HRS No. 31.21 (xxii)

For additional length of Galvanised iron flexible pipe more than 1 metre ( the payment is to be made for additional length of pipe more than 1 metre only in item no. xxvii ). Size 25 mm dia. HRS No. 31.21 (xxviii) (c)

Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . HRS No. 31.22(i)

Extra for using salt and charcoal / coke for pipe earth electrode as required. HRS No. 31.22(ii)

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . HRS No. 31.22(xii)

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 10 Sq. mm 2 Core Cable . HRS No. 31.26 (iv) Ard.

Supply and erection of suitable compression type brass cable glands for underground Cable. 25 Sqmm to 50 Sqmm Cable 2 to 4 Core. HRS No. 31.28 (iii)

Street Light. Supply and erection of 32 mm dia meter 1.5 metre long bracket ( B-Class ) making an angle of 10 to 15 degree with horizontal plane for mounting street light fitting fixing of GI bracket on wall with 2 Nos. , 32 mm x 3 mm thick MS clamps including the cost of cutting , welding of GI pipe complete with cement sand mixture , bolts and nuts etc. including necessary connections . HRS No. 31.30 (III) ( xv )

Miscellaneous . Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work. 10 sqmm . HRS No. 31.35 (ix) (c)

25 sqmm . HRS No. 31.35 (ix) (e)

Wiring only in 1.5 Sqmm PVC insulated copper conductor cable in existing conduit pipe and MS boxes covered with 5mm thick bakelite sheet including cost of switch, wall socket, ceiling rose etc. Fan Point Short point HRS No. 31.38 (I) (a)

Medium Point HRS No. (b)

Long point. HRS No. (c)

Light Point Short point HRS No. 31.38 (II) (a)

Medium Point HRS No. (b)

Long point. HRS No. (c)

Call bell point Long point. HRS No. 31.38 (VI) (c)

3 pin 5 amp. plug point including earthing the 3rd. pin etc. Short point HRS No. 31.38 (VII) (a)

Medium Point HRS No. (b)

3 pin15 amp. plug point with 4 sq mm PVC insulated Copper conductor cable- including earthing the 3rd. pin etc. Long point. HRS No. 31.38 (VIII) (c)

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe . Size 1.5 sqmm ( 3/0.81 ) HRS No. 31.40 (i)

Size 2.5 sqmm ( 3/1.05 ) HRS No. 31.40 (ii)

Size 4 sqmm ( 7/0.85 ) HRS No. 31.40 (iii)

Size 6 sqmm ( 7/1.05 ) HRS No. 31.40 (iv)

Supply and erection of Double door sheet steel enclosure distribution boards suitable for MCB's & ELCB's recessed in wall including bonding to earth complete with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 8-way , SP&N ( Horizontal) HRS No. 31.41 (ii)

Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work. 25 mm dia. HRS No. 31.44 (ii)

Supply and erection of MS Saddle and clamps duly galvanised , on wall / RCC parapit for fixing underground cable at a distance of 0.60 metre center to center fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work. HRS No. 31.48

Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection etc. up to the entire satisfaction of the Engineer-in-Charge of the Work. HRS No. 31.55

Supply and erection of 72W LED Streetlight Luminaires with Pressure die cast aluminium housing with lens and accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work. (Make as per approved list attached). HRS No. NS

PK Technical Services

Choudhary Electricals